Bosch Digital Carriage

Model DC010

(On Table Saw Model 4100DG-09)

The Bosch Model DC010 Digital Carriage is a precision measuring accessory that is used with the 4100 table saw’s rip fence. The digital carriage will accurately display the distance between the saw’s blade and the working side of the fence before the operator makes a rip cut. The display can be set to show inch (3 mode variations) or metric measurements. The digital information displayed on the carriage is in addition to the analog measurements seen where the fence pointer or table pointer refers to the inch scale on the table saw’s front rail. The 4100 table saw can be preset to make rip cuts without using the digital carriage – see pages 50-55

Note: This digital carriage is only used when making rip cuts and should be placed in the left most “parking position” when the saw is used for making other types of cuts.

Features (see figures 37 & 38)

ON/OFF button 2:

turns display ON or OFF.

UNITS button 3:

sets display’s unit of measurement.

RESET button 4:

resets the display to a zero

 

measurement.

LCD Display 5:

displays digital measurements and

 

battery condition.

Magnets 6:

connects digital carriage to side of

 

fence 9 or parking plate 10.

Battery cover 7:

(not shown) opens to access 9V battery.

Connector plate 8:

connects saw’s rip fence 9 to digital

 

carriage 1.

Parking plate 10:

holds digital carriage 1 when not being

 

used.

FIG. 37

6

 

 

 

10

 

5

6

 

2

3

4

8

 

 

 

 

1 7

9

Installing 9 Volt Battery

(see figures 37 & 38)

FIG. 38

 

The digital carriage includes a 9 Volt Alkaline Battery – remove

 

 

 

the battery from its package. Slide the digital carriage to the

 

 

 

“parking position” where the left magnet 6 is in contact with the

 

 

 

parking plate 10. Position the 4100 table saw on its side and

 

 

 

with the digital carriage resting on the parking plate. Using a

 

 

 

screwdriver, loosen the screw holding the battery cover 7 (not

 

 

 

shown) located on the bottom. Remove the cover - the loosened

 

 

 

 

 

DISPLAY TEST

screw should remain with the cover. Pull out the wires with the 9

 

 

volt battery connector with snap on endings – connect to new

 

 

 

battery by firmly pressing the connector on to the battery

 

 

 

terminals. Put the battery into its container and screw the

 

 

 

battery cover back in place.

 

 

 

Note 1: The digital carriage is designed to work best when using a high quality 9 Volt Alkaline Battery.

Note 2: Only when installing a new battery, all graphic segments in the LCD display will turn on (a display test ) for a short period of time (5 seconds), and then the display will change to the 1/16 INCH mode (default mode). The display can be turned off by following the ON/OFF button instructions below or just do nothing for approximately one minute and it will automatically turn off.

48.

Page 48
Image 48
Bosch Appliances 4100DG, 4100-09 Bosch Digital Carriage, Model DC010, Installing 9 Volt Battery, Features see figures 37

4100DG, 4100-09, 4100 specifications

Bosch Appliances 4100, 4100-09, and 4100DG are a series of highly regarded kitchen appliances designed to enhance efficiency and performance in home cooking. Bosch has a long-standing reputation for crafting high-quality products, and this series is no exception. Each model combines cutting-edge technology with sleek design to meet the needs of modern households.

A standout feature of the Bosch 4100 series is its powerful performance. These appliances come equipped with high-performance motors and advanced cooking capabilities that ensure consistent results. Whether baking, broiling, or roasting, users can expect even heat distribution and precise temperature control, which are critical for achieving culinary perfection.

The 4100 appliances also emphasize intuitive usability, featuring easy-to-navigate controls and thoughtful design. The models include user-friendly digital displays and simple button interfaces, making it easy for anyone, regardless of cooking experience, to operate them seamlessly. Additionally, the Bosch 4100 series is designed with a focus on safety, incorporating advanced systems that prevent overheating and ensure secure operation.

In terms of design, the Bosch 4100 models boast a streamlined aesthetic that blends well with any kitchen décor. Constructed from high-quality materials, they offer durability while exuding a modern, sophisticated look. The stainless-steel finishes not only add elegance but are also easy to clean and maintain, making them practical for everyday use.

Another noteworthy characteristic of the Bosch 4100 series is the energy efficiency standards they meet. These appliances are designed to utilize less energy without compromising performance, helping homeowners save on utility bills while minimizing their environmental footprint.

The 4100DG model specifically stands out for its dual-fuel capabilities, allowing users to harness the benefits of both gas and electric cooking methods. This versatility provides chefs with greater flexibility and precision, accommodating a variety of cooking styles and preferences.

Overall, Bosch Appliances 4100, 4100-09, and 4100DG exemplify craftsmanship and innovation in the kitchen appliance sector. Their combination of advanced technology, user-friendly features, and stylish designs make them an excellent choice for anyone looking to elevate their cooking experience and enhance their kitchen functionality.