Wolf ICBDD30 installation instructions J U S TA B L E Discharge, 483 mm

WOLF D OW N D R A F T VENTILATION SYSTEMS

A D J U S TA B L E DISCHARGE

Wolf downdraft systems have an adjustable discharge that will allow you to negotiate ducting around floor joists and other obstacles.

Three different discharge locations are avail- able with side-to-side adjustment for accurate alignment of ductwork. The blower is shipped with the discharge facing down. Refer to the illustration below for the discharge location and adjustment that best suits your installa- tion.

CENTERLINE OF COUNTERTOP CUT-OUT

CL

562 mm

INTERNAL BLOWER

483 mm

IN-LINE OR

REMOTE BLOWER

416 mm	CENTERLINE OF COUNTERTOP CUT-OUT
INTERNAL BLOWER
546 mm
IN-LINE OR
REMOTE BLOWER
		CL

RIGHT

DISCHARGE

LOCATION

ADJUSTMENT:

362 mm x 89 mm

IN-LINE OR

REMOTE BLOWER

ADJUSTMENT:

25 mm – 178 mm

INTERNAL BLOWER

165 mm MAX

IN-LINE OR

REMOTE BLOWER

		140 mm	127 mm MAX			140 mm
		INTERNAL BLOWER				INTERNAL BLOWER
			IN-LINE OR
		108 mm
	LEFT		REMOTE BLOWER			108 mm
				BOTTOM
		IN-LINE OR				IN-LINE OR
	DISCHARGE
				DISCHARGE
		REMOTE BLOWER				REMOTE BLOWER
	LOCATION			LOCATION
			DISCHARGE CUT-OUT
			DIMENSIONS:
			260 mm x 89 mm		NOTE: Measurements are to centerline of duct cut-outs
			INTERNAL BLOWER
			362 mm x 89 mm
CENTERLINE OF COUNTERTOP CUT-OUT			IN-LINE OR
Downdraft adjustable discharge

REMOTE BLOWER

14