Wolf ICBDD30 installation instructions Downdraft installation dimensions

WOLF D OW N D R A F T VENTILATION SYSTEMS

I N S TA L L AT I O N S P E C I F I C AT I O N S
Wolf downdraft Model ICBDD30 will fit most	IMPORTANT NOTE: To install a downdraft
762 mm wide cabinets, Model ICBDD36 will fit	system and a Wolf cooktop, you must allow for
most 914 mm wide cabinets and Model	a minimum 638 mm flat counter space from
ICBDD45 will fit most 1156 mm wide cabinets.	front to back. A countertop with a raised lip or
It is recommended that oversized cabinets be	backsplash may not allow enough space for
used for easier installation. Cabinet backs may	proper installation. 60 mm of flat countertop is
need to be removed.	required behind the cooktop and 44 mm is
Wolf downdraft ventilation systems can be	necessary between the back edge of the
	cooktop and inside of cabinet back.
mounted in an island, peninsula or standard
wall location.	If downdraft Model ICBDD30 is installed in
The illustration below provides installation	combination with with two cooktops or inte-
	grated modules, an integrated module support
dimensions for all Wolf downdraft models.
	(8603386) for downdraft ventilation is required.
Pay careful attention to the areas of potential
	The integrated module support is not required
interference as noted in the illustration.
	for Model ICBDD45.

638 mm min

44 mm min OF FLAT COUNTERTOP*

BACK EDGE
OF COOKTOP	16 mm
TO INSIDE OF
CABINET BACK*		489 mm
		COOKTOP CUT-OUT
8.7 mm		DEPTH
	60 mm
	54 mm		197 mm
		83 mm
745 mm
COUNTERTOP
TO BOTTOM OF		92
AIR BOX
		mm
	127	457
	mm	mm
	181 mm

64 mm min

WITH NO

RAISED LIP*

914 mm

610 mm min

CABINET DEPTH

*AREAS OF POTENTIAL INTERFERENCE

Downdraft installation dimensions

8