USING MODELS WKE / WKEX / WKED / WKEDX
Preheating
1.Turn Master Switch ON. Amber ON light will come on, indicating that power to oven is on.
2.Set Thermostat as desired. Refer to COOKING GUIDELINES for suggested temperatures and times for various products.
3.Prepare product and place in suitable pans. When white HEAT light goes off, oven has reached desired preheat temperature.
Cooking
1.Open doors and load the product into the oven. Place pans in the center of the racks. Close doors.
2.Set the Timer. After the preset time lapses, turn timer to OFF position to stop alarm.
3.When product is done, open doors and carefully remove cooked product from the oven. Wipe up any spills.
End of Day
1.Turn thermostat to OFF.
2.Turn Master Switch to OVEN COOL. Leave doors open while the fan is on to cool the oven.
3.When oven has cooled sufficiently, turn Master Switch OFF and clean the oven.
CLEANING (all models)
WARNING: DISCONNECT ELECTRICAL SUPPLY AND PLACE A TAG AT THE DISCONNECT SWITCH INDICATING THAT YOU ARE WORKING ON THE OVEN BEFORE CLEANING.
Clean outside of the oven daily by wiping with a clean damp cloth.
Clean porcelain oven interior daily with soap or detergent and water. Rinse thoroughly and wipe dry with a soft clean cloth.
Optional Stainless Steel Oven Interior
Soap or detergent and water usually handle routine cleaning. Rinse thoroughly, dry with a soft clean cloth.
For
This treatment is equally effective for "heat tint" (slightly darkened areas caused by oxidation). Again, remember to rub in the direction of the polish lines. Rinse with clear water and dry with a soft cloth.
– 8 –