Viking F20518A manual Final Installation 36W. Double, Connect gas line and check For leaks

Final Installation (36”W. Double)

Note: Purchase necessary gas kit – IKD-VGSO.

1 2

Install upper oven as described on page 21, “Final	Place bottom oven on a protected area near the
Installation” (36”W. single).	cabinet. Remove 2” hole knockout from oven top.

Final Installation (36”W. Double) (cont.)

7 8

Remove all knobs, push buttons, bezels, and lower	Remove control box, disconnecting the
access panel, side trim, and control panel.	three harness connectors.

3

2 3

1

Remove access panel from oven side and

pipe plug from pipe tee.

4

2

1 3

Attach male connector to pipe tee. Feed flex tubing through 2” hole and attach to the male connector.

9 10

Connect gas line and check

for leaks.

2

1 3

Attach 8” pipe nipple through lower oven cabinet to upper oven pipe tee. Attach female connector to pipe nipple. Attach flex tubing to female connector.

5 6

1

	2
Replace access panel.	Push lower oven straight into cabinet.

11 12

Reconnect three harness connectors and	Replace side trim, control panel, lower
replace control box.	access panel, control panel knobs,
	push buttons, and bezels.

22 23