General Information, Installation 30W

General Information

Door Removal (30”W.)

Installation (30”W.) 1

NOTICE

READ AND FOLLOW ALL WARNING AND CAUTION INFORMATION WHEN INSTALLING THIS APPLIANCE.

•All openings in the wall behind the appliance or in the floor under the appliance should be sealed.

•Keep appliance area clear and free from combustible materials, gasoline and other flammable vapors.

•Disconnect the electrical supply prior to servicing or cleaning.

•When removing the appliance for cleaning or service, disconnect AC power supply and carefully remove the appliance by pulling forward.

•Electrical requirements are listed in the product specifications under the “Electrical

&Gas Requirements” section.

•Do not obstruct the flow of combustion and ventilation air.

Moving, Handling, and Unpacking

Remove and discard all packing materials, including cardboard and tape on the outside and inside of the ovens.

Some stainless steel parts may have a plastic protective wrap which must be peeled off. The interior should be washed thoroughly with hot, soapy water to remove film residues and any dust or debris before being used, then rinsed and wiped dry. Solutions stronger than soap and water are rarely needed.

Recommendations for Unpacking

•Products are shipped on pallets with foam footings and corrugated inner-packing and exterior hoods.

•Products are anchored to the pallet using metal straps that are screwed to the bottom of the product and the pallet.

•DO NOT remove protective packaging until you are ready to perform the installation.

•To remove the packaging, first remove the staples located at the bottom perimeter of the corrugated cover.

•Remove the corrugated cover by lifting it off the product and remove the inner- packing.

•Detach the product from the metal anchor strip by removing the attachment screw.

Recommendations for Moving

•The appliance is heavy – use extreme care when handling!

NOTICE

DO NOT use the handle or oven door to lift the oven. Remove door before installation to ensure that it is not used to lift the unit. DO NOT lift or carry the door by the handle.

Removing the door must be done by your dealer, a qualified licensed plumber, or certified gas installer.

•Only proper equipment should be used to move products.

•ALWAYS take steps to protect flooring at the installation location when moving products.

DO NOT use the handle or oven door to lift the oven. Remove door before installation to ensure that it is not used to lift the unit. DO NOT lift or carry the door by the handle.

Removingthe door must be done by your dealer, a qualified licensed plumber, or certified gas installer.

Remove wooden brace on front of pallet.

	2
1	2
	1
	2
Open door completely. Place pin in pin hole.	Remove hinge trim screws. Take off hinge trim.
Note: Two pins included.
4	5

Close until pins stop door.	Lift door up and out.
	Note: Do not lift door using handle.

F20518A specifications

The Viking F20518A is a remarkable piece of engineering that has made significant strides in the field of automotive technology. This vehicle, known for its robust design and advanced features, caters to both enthusiasts and everyday drivers seeking reliability and performance.

One of the standout features of the Viking F20518A is its powerful engine. Equipped with a high-performance powertrain, it delivers impressive horsepower while maintaining excellent fuel efficiency. This balance of power and economy makes it an ideal choice for those looking to maximize their driving experience without compromising on mileage.

The F20518A also boasts cutting-edge technology to enhance safety and convenience. The incorporation of advanced driver assistance systems (ADAS) ensures a safer driving experience, helping to reduce the likelihood of accidents. Features such as automatic emergency braking, lane-keeping assist, and adaptive cruise control work in tandem to provide drivers with an extra layer of security on the road.

Moreover, the cabin of the Viking F20518A is designed with comfort and functionality in mind. The interior is spacious and well-appointed, featuring high-quality materials and ergonomic seating that cater to both the driver and passengers. In addition, the latest infotainment system is equipped with a user-friendly interface that supports connectivity options such as Bluetooth, Apple CarPlay, and Android Auto, allowing for seamless integration of smartphones and other devices.

The vehicle's exterior design combines aesthetics with aerodynamics, contributing to its fuel efficiency. The sleek lines and bold front grille give it a distinctive look that stands out on the road. Furthermore, the F20518A is built with durability in mind, incorporating high-strength materials to enhance overall structural integrity and longevity.

Performance-wise, the Viking F20518A features an advanced suspension system that provides a smooth ride, even on rough terrains. Its handling is responsive and precise, making it suitable for both city driving and off-road adventures.

In summary, the Viking F20518A is an exemplary model that integrates performance, safety, technology, and comfort. Its combination of powerful engine options, advanced safety features, and a high-quality interior makes it a compelling choice for a wide range of drivers. Whether commuting or exploring the great outdoors, the F20518A is designed to meet the demands of modern driving. As such, it stands as a testament to the evolving standards of automotive excellence.