Samsung SVR-940/450 Sata HDD Installation, Jumper Switch Set the Master/Slave using Jumper switch

SATA HDD INSTALLATION

1. Insert rubber rings to the bracket and screw the bracket to the HDD.

2.When assemble the SATA converter board, screw on the only upper-right corner like the picture below.

Need assy Screw

3.Select "Master" or "Slave" using the Jumper switch on SATA converter board. Set the Master/Slave using the Jumper switch.

In case of installing two HDDs, firstly set the Master/Slave. If One HDD is "Master", the other

should be set to "Slave".

JUMPER Switch

Set the Master/Slave using Jumper switch.

Digital Video Recorder 79 User’s Manual