Door Replacement & Adjustment (30”W.)
1 | 2 |
Door Removal (36”W.)
Installation (36”W.) 1
Replace door. | Open door completely. Reinstall hinge trim plates. |
Note: Screw holes may need to be
NOTICE
DO NOT use the handle or oven door to lift the oven. Remove door before installation to ensure that it is not used to lift the unit. DO NOT lift or carry the door by the handle.
Removingthe door must be done by your dealer, a qualified licensed plumber, or certified gas installer.
2
1 | 2 |
|
20° |
Open door approximately 20°, then slowly pull upward
until the door stop pops out of door socket.
3 | 4 |
Take out pins. | Close door. |
Note: To adjust door turn adjustment screw |
|
clockwise (up) or counterclockwise (down). |
|
2 | CAUTION | |
Toavoid risk of personal injury or property | ||
| ||
| damage, verify door stops are engaged | |
| before removing door. |
Gently close until the door rests against one of the stop
notches.
3
Slide door completely from hinge arms.
18 | 19 |