Listening to an External Source
If other audio component(s) are connected to this system (see page 16) You can hear the external source through the speakers of this system.
Headphone Jack
Connect a set of stereo headphones to this jack for private listening without disturbing others. The speakers are automatically disconnected when headphones are in use. You must use a headphone with a full size plug (¼”/6.25mm diameter).
When using headphones always set the volume control to a low level before putting the headphones on. Then put the headphones on and very gradually increase the volume to a comfortable listening level.
Mute Control
To temporarily shut off the sound from the speakers press the MUTE button on the remote control. The "MUTING" indicator flashes on the front panel display.
Press the MUTE button again to cancel Mute and restore the sound. The "MUTING" indicator disappears.
Reset Button
This system includes a special electronic protection circuit designed to protect the internal computer from sudden power surges or static electricity. If the system is subject to a sudden power surge the protection circuit will freeze the internal computer to prevent permanent damage. If you find that the system is 'frozen' and does not respond to any input from the front panel controls or the remote control, first try disconnecting the AC power cord for a few minutes and then reconnecting it. If this does not correct the problem, use a straightened paper clip or similar object to press the RESET button, located in a small opening on the back panel. The system will return to the Standby mode.
Note: Pressing the RESET button will completely clear the internal memory. It will be necessary to
1. You can press the TV or Video button to select the desired external source directly.
2. Operate the unit which is connected to this system.
3. Adjust the volume level by pressing the VOL / button on the front panel or remote control of this system.
39