Playing Discs
This chapter describes how to play a DVD/CD/MP3 disc.
Basic Playback
IMPORTANT:
Please note that some DVD movie discs may not have all the features described in this chapter. For example, older movies may not allow you to select multiple camera angles. Refer to the instructions or liner notes that are included with each disc to determine what features and operations are available on that particular disc.
1.Turn on your TV and select the “Video Input” or “External Source” so that you can view the picture from this system on your TV. Refer to the TV instruction manual if necessary.
2.Press the STANDBY button on the front panel of this system or on the remote control. The Standby indicator goes off and the main display comes on. Note: The main power switch on this system must be ‘On’.
3.If necessary, press the DVD/CD function button on the front panel of this system, or the FUNCTION button on the remote control to select the DVD function. The DVD logo screen should appear on your TV.
4.Press the OPEN/CLOSE button on the front panel of this system or on the remote control to open the disc drawer. Place a disc on the tray label side up. Be sure that the disc is correctly centered in the disc pocket. Press the OPEN/CLOSE button again to close the drawer. The player begins loading the disc. An operating massage will appear on the TV screen and/or the front panel display as follows:
On TV screen | On front panel display |
|
|
| WAITING |
DISC LOADING** | LOADING |
OPEN | OPEN |
CLOSE | CLOSE |
PLAY |
|
|
|
NO DISC | NO DISC |
BAD DISC | BAD DISC |
| DVD/CD/MP3 |
WRONG REGION (See page 12)
PARENTAL VIOLATION (See page 33)
19