Breville BES870 brochure Cleaning the Steam Wand, Cleaning the Outer Housing / CUP Warming Plate

Page 16

PCAREge header& CLEANING.....

CLEANING THE STEAM WAND

1

2

3

4

5

Run steam to clear milk

Wipe steam wand after

Clean hole with pin

Remove tip

Soak tip overnight then

from wand after texturing

each use

 

 

re-attach

PCAREge header& CLEANING.....

CLEANING THE OUTER HOUSING / CUP WARMING PLATE

The outer housing and tray warming plate can be cleaned with a soft, damp cloth. Then polish with a soft, dry cloth.

Do not use abrasive cleansers, pads or cloths which can scratch the surface.

CLEANING THE DRIP TRAY

STORING YOUR MACHINE

Before storing, press the POWER button to off, turn the steam dial to STANDBY switch Off at the power outlet and unplug.

Remove unused beans from the hopper, clean the grinder (see page 29), empty the water tank and the drip tray.

Ensure the machine is cool, clean and dry. Insert all accessories into position or into

The steam wand should always be cleaned after texturing milk.

Wipe the steam wand with a damp cloth, and then with the steam wand directed back into the drip tray, briefly set the steam dial to the STEAM position. This will clear any remaining milk from inside the steam wand.

Ensure the steam dial is in the STANDBY position. Press the POWER button to Off and allow the machine to cool.

If the steam wand remains blocked, use the pin on the cleaning tool to clear the opening.

If the steam wand continues to be blocked, the tip of the steam wand can be removed by using the spanner in the middle of the cleaning tool.

Unscrew the tip with the cleaning tool.

Soak the tip in hot water before using the pin on the cleaning tool to unblock. Replace the tip back onto the steam wand and secure with the cleaning tool.

The drip tray should be removed, emptied and cleaned at regular intervals, particularly when the drip tray full indicator is showing EMPTY ME!.

Remove grid, compartments and EMPTY ME! indicator from the drip tray. Dispose of the grounds from the dry compartment into the bin. Wash the drip tray with warm soapy water, using a non-abrasive washing liquid, rinse and dry thoroughly. The EMPTY ME! indicator can be removed from the drip tray by pulling upwards to release the side latches.

The drip tray base and cover are dishwasher safe.

the storage tray.

Store upright. Do not place anything on top.

WARNING

Do not immerse power cord, power plug or appliance in water or any other liquid. The water tank should never be removed or completely emptied during decalcifying.

CLEANING / UNBLOCKING THE FILTERS, PORTAFILTER AND GROUP HEAD

Periodically run water through the machine with the portafilter in place, but without any ground coffee, to rinse out any residual coffee particles.

1

2

3

4

 

5

6

 

 

 

INSERT

LOCK

 

 

 

 

 

 

 

PRESS & HOLD

 

Knock grinds out

Clean filter basket

Place filter basket into

Insert & lock portafilter

Flush water

Use cleaning tool to unblock

 

 

portafilter

into Group Head

 

 

Repeat steps C1-C2

CLEANING THE STORAGE TRAY

The storage tray is located behind the drip tray and is pulled forward when you slide the drip tray out. Clean the tray with a soft, damp cloth (do not use abrasive cleansers, pads or cloths which can scratch the surface).

Should the fine holes in the filters become blocked follow the following steps:

1.Place the filter into the portafilter. Run water through the machine with the filter and portafilter, without any ground coffee, in place.

2.The fine pin on the cleaning tool can be used to clear the filter basket holes.

3.To clean the Single Wall filters simply run water through the portafilter using the manual pour function by holding down the 1 CUP button.

4.For a thorough clean of the filters, run a cleaning cycle of the machine with the portafilter and filter in place.

30

 

31

 

 

 

Image 16
Contents Barista Express Congratulations On the purchase of your new Breville ProductImportant safeguards Adjustable Temperature Control KnowAutomatic Dosing Dose Trimming ToolPower Button Cup Warming Tray Clean ME LightAutomatic Dosing Mechanical Clutch Protection Grind Size SelectorOperating Before First UseConditioning the Water Filter First USEManual Dosing Trimming the DoseResetting Default Volumes PRE-PROGRAMMED Shot Volume 1 CUPProgramming Single Espresso Using HOT Water Outlet Using the Steam DialAuto Purge Advanced Mode Adjusting Water TemperatureCoffee Making Tips Preparation PRE-HEATINGSingle Wall Filters GrindCoffee Dose and Tamping Purging the Group HeadInserting the Portafilter Extracting EspressoCare & Cleaning Hints & TipsINSTALLING/REPLACING Filter in the Water Tank Cleaning CyclePortafilter Cleaning Cleaning Cycle Process GuideCleaning the Conical Burr Grinder Advanced Cleaning for the Conical Burr GrinderConcentrated Solution for harder water Decalcifying the MachineCleaning the Steam Wand Cleaning the Outer Housing / CUP Warming PlateCleaning the Drip Tray Storing Your Machine Cleaning the Storage TrayTroubleshooting Grinder safety clutch has Coffee is too coldNo crema Machine is makingWhen micro switch is No steam is generatedMilk is not creamy after TexturingCoffees to TRY CappuccinoEspresso Ristretto

BES870 specifications

The Breville BES870, commonly known as the Barista Express, is a standout espresso machine that combines style, functionality, and efficiency, making it a favorite among coffee enthusiasts. This all-in-one machine not only allows users to grind their coffee beans fresh for each brew but also provides extensive control over the brewing process, ensuring a rich and personalized coffee experience.

One of the main features of the Barista Express is its built-in conical burr grinder. This grinder allows you to select the grind size and dose your coffee directly into the portafilter. With a choice of grind settings, the user can achieve their preferred consistency, from fine for espresso to coarser for other brewing methods. The grind size dial is simple to operate, making it easy to adjust according to various coffee types.

The machine boasts a powerful 15-bar Italian pump that ensures optimal water pressure during extraction. This is critical in producing a rich and aromatic espresso shot. Coupled with the thermocoil heating system, it provides quick heat-up times and stable temperatures essential for consistent brewing results. This is complemented by a pre-infusion function that gently expands the coffee grounds before full-pressure extraction, yielding a more balanced flavor.

Another notable characteristic of the Breville BES870 is its steam wand. The steam wand allows users to create microfoam for lattes and cappuccinos, which can elevate home coffee preparation to café-quality. With its intuitive design, the steam wand easily rotates for effortless frothing and texturing of milk.

The machine also features an integrated drip tray and a removable water tank, which holds up to 67 ounces, allowing for multiple brews before refilling. An informative LCD screen displays important brewing information such as grind size, shot time, and water temperature, ensuring users have all the necessary data at their fingertips for perfecting their brewing techniques.

In terms of design, the Breville Barista Express has an aesthetically pleasing stainless-steel exterior that not only looks professional but also ensures durability. The thoughtful construction, combined with its user-friendly controls, makes it suitable for both novice baristas and seasoned coffee lovers alike.

In summary, the Breville BES870 Barista Express is a sophisticated espresso machine that embodies the perfect blend of technology, design, and user control, making it an ideal choice for anyone looking to elevate their coffee game at home.