TEMPERATURE PROBEECONTINUED
CHANGING THE TEMPERATURE SETTING
l When using the Temperature | Probe, | COOK TEMP can | be | changed | before | or during | |||||
operation: |
|
|
|
|
|
|
|
|
|
|
|
COOK | TEMP. |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
| |||||
START.The oven | will | continue | cooking | to the | new | temperature. | If the new | ||||
temperature | is lower | than | the temperature | of the | food, | the oven | will | shut | off. | ||
HINTS FOR USING THE TEMPERATURE PROBE
DO...
l use hot pads when removing probe from food or food from oven.
l stir foods during cooking when recommended
l stir soups, casseroles and drinks before serving.
l cover roasts with foil and let stand a few minutes after cooking.
Remove foil if you decide to cook it longer.
DON’T...
l let probe or probe cable touch any part of the oven interior.
l let probe touch foil [if used). Foil can be kept away from probe with wooden toothpicks. Remove foil if arcing occurs.
0 use paper, plastic wrap or or plastic con- tainers. They will be in the oven too long.
l use probe in regular oven.
l force probe into frozen food.
l use probe for foods that need to simmer.
CLEANING THE PROBE:
1.Remove probe from microwave oven using hot pads.
2.Wipe probe with a hot sudsy cloth. Use a plastic scouring pad to remove stubborn foods.
3.Probe may be placed in the silverware basket of the dishwasher.
4.Be careful not to kink the cable.
NOTE: Make sure you have the right probe for your oven. It will have
DELAYED START
The microwave oven can be set to start automatically when you are not at home. Use COOK CYCLE 1 at “0”Cook Power to delay the start of COOK CYCLE 2 for up to 99 minutes, 99 seconds.
DO THIS...
1. Put in food and close the door. See CAUTION below.
•l3. .
2. Touch COOK CYCLE 1.
THIS HAPPENS...
The COOK CYCLE 1 Signal Light will come on and the Display will show four O’s
3.Touch number pads for the length of delay you
The Display will show the numbers you touched in the order you touched them.
18
want.
This example shows 60 minutes, (1 hour).
