Whirlpool MW8750XL warranty Using your miaowave oven, Microwwe Oven Controls

Using your miaowave oven

MICROWWE OVEN CONTROLS

There are three parts in the control section:

-The Digital Display/ Clock,

-Command Pads and Signal Lights,

-Number Pads.

What each of these does will be covered on the following pages. Read them carefully. When you first plug in the oven, the Display

will show 88:88. If. after you set the Clock

[page 5), the Display again shows all S’s, it means your electricity was off for a while Reset the Clock.

bne note: The Command				and Number
Pads	are not	buttons	You	don	t have to
[push	them.	lust touch	them.		.-I

DIGITAL	DISPLAY /CLOCK
ma	When	you	are not
	using the	microwave
	oven, this IS an accu-
	rate digital		clock.
When	you are using the microwave		oven,

this displays time settings and shows you what number pads you touched.

COMMAND PADS AND SIGNAL LIGHTS

Touch Com- mand Pads to tell the microwave oven what to do and In what order

A few examples:

See page 20 for information on the tone you hear when touching any pad.

Each Command Pad has its own Signal Light [except START and CANCEL). The Signal Lrght comes on when you touch the Com- mand Pad.

Whrle the oven is running, a Signal Light (or lights) will be on to show what the oven is doing

NUMBER PADS

4 ConGal Panel ON /OFF Switch