count
down
The Display counts down the time to show how much cooking time is left in the first cycle.
When the cooking time ends you will hear 4 beeps. (You can stop the beeping by
opening the oven door ortouching CAN- CEL.) When the beeping stops, the Display will show the time of day.
CHANGING THE COOKING TIME
You can change the cooking time anytime during the cycle:
1.Touch COOK CYCLE 1.
2.Touch numbers for new time.
3.Touch START.
COOK CYCLE 1 will continue cooking for the new time.
LOWER COOK POWERS
For best results, some recipes call for lower Cook Powers. Lowering the Cook Power slows the cooking. The lower the Cook Power, the slower the cooking. Each Number
Pad on your microwave | oven | stands | for a | different | percentage | of Cook Power. | Many | ||||||
recipes | in your MICRO | MENUS- | Cookbook | tell you, by number, which Cook Power to | |||||||||
use. Recipes | in other | books | and | magazines |
| may | tell you | by name (HI, MED, LO, etc.) or | |||||
by percentage | (1 O%, 50%, | 80%, | etc.). |
|
|
|
|
|
|
| |||
The | following | chart | gives | you | the percentage | of Cook | Power | each Number | Pad | ||||
stands | for, and | the Cook Power |
| name | usually | used |
|
|
| Tmk. | |||
automatic 100% of full power HIGH
9 = 90% of full power
8 80% of full power
770% of full power
6= 60% of full power
550% of full power MED
4 40% of full power
330% of full power
2~ 20% of full power
1 em 10% of full power LO
0~ no power [fan and light will be off 1
DO THIS...
1. Put food in the oven and close the door.
3.Touch Number Pads for the cooking time you want.
THIS HAPPENS...
The COOK CYCLE 1 Signal Light will come on and the Display will show four 0’s.
The Display will show the numbers you touched in the order you touched them. This example shows 7 minutes, 30 seconds.
The COOK POWER Signal Light will come on and the Display will show two 0’s.
4. Touch COOK POWER.
CONTINUED NEXT PAGE
7
