Whirlpool MW8750XL warranty Time, About the Quick Defrost Cycle

3.Touch Number Pads for

the defrosting time you want.

count down

The QUICK DEFROST Signal Light will stay on to show that the oven is in the QUICK DEFROST Cycle.

The Display counts down the time to show how much defrosting time is left.

When the defrost time ends, you will hear 4 beeps. [You can stop the beeping by opening the oven door or touching CANCEL.) When the beeping stops, the Display will show the time of day.

STANDING	TIME
For best results, allow			the food to stand			for a while after defrosting. This helps equalize
the temperature		of the	food	to	provide	more even defrosting.
When	COOK	CYCLE	1 follows		QUICK	DEFROST, the oven automatically	provides a
standing	time	equal to the		time touched		in for QUICK DEFROST. COOK	CYCLE 1 will
begin after the automatic standing time.
For a different standing time:
I. Touch	QUICK DEFROST and				desired	time.

2.Touch COOK CYCLE 2.

3.Touch numbers for desired standing time.

4.Touch COOK POWER.

5.Touch “0”for zero Cook Power.

6.Touch START.

When the QUICK DEFROST is over, the oven will shut off The Display will count down the time for COOK CYCLE 2 at zero Cook Power. You will hear 4 beeps when the standing time is over.

ABOUT THE “QUICK DEFROST” CYCLE

The	microwave		oven	automatically		divides the time set for the QUICK		DEFROST
Cycle into three equal parts:
- First part						80%	of full	Cook	Power;
-Second		part				50%	of full	Cook	Power;
-Third		part				20%	of full	Cook	Power.
This automatic			step-down		in Cook Power is an important part of the QUICK DEFROST
Cycle.	It helps		defrost	food	quickly	and completely.

You can change the time setting any time while the QUICK DEFROST Cycle is operating:

1.Touch QUICK DEFROST.

2.Touch numbers for the new time.

3.Touch START.

Any	new	time setting			made	while	QUICK	DEFROST	is operating	will continue the
defrosting		only	at	20% of full Cook Power.
The	best	time	to	change	the	setting	is near	the end	of the QUICK	DEFROST Cycle.

1.Open the door.

2.Check the food with long-tined fork; if center area is hard frozen, set additional time. Remember that standing time will further defrost the food.

3.	Close the door and touch	START to continue the cycle if no additional		time is
	needed.			9
4.	Or, touch in new instructions	if additional	time is needed.