Breville BES870 brochure Manual Dosing, Trimming the Dose

Page 7

Operating your Breville Product

Operating your Breville Product

Filling the Water Tank

Ensure the water filter is securely fitted

inside the tank.

Fill the water tank with cold tap water

to the maximum mark on the side of the

tank and slide the water tank back into

position at the back of the machine.

Plug the power cord into power outlet

and switch On at power point.

Press the POWER button. The POWER

There are 18 settings on the GRIND SIZE select dial - The smaller the number, the finer the grind size. The larger the number, the coarser the grind size. We recommend you start at the No. 5 setting and adjust as required.

Adjusting the Grind Amount

Set the GRIND AMOUNT dial to the

3 o’clock position as a starting point for dose amount. Adjust towards LESS or MORE as required to adjust the dose amount so the cap on the supplied tamper is level with the top edge of the filter basket rim, AFTER tamping.

button surround will flash while the

machine is heating. When the correct

temperature has been reached, all the

button surrounds on the control panel

will illuminate.

NOTE

Check the water level before use and replace the water daily. The water tank should be filled with fresh, cold tap water before each use.

Do not use de-mineralised or distilled water or any other liquid.

Grinding the Coffee

Fill the hopper with fresh coffee beans.

Place the portafilter into the grinding cradle.

Insert filter basket required into the porta-filter.

Press the FILTER SIZE button to select your filter size (single or double).

FILTER SIZE

SINGLE DOUBLE

NOTE

You may need to adjust the GRIND AMOUNT dial a few times to achieve the correct grind amount.

MANUAL DOSING

With the portafilter inserted, push and hold the micro switch down until the desired amount of ground coffee has been dosed.

To stop the function during a manual grind function, simply release the portafilter. This will release the activation switch to stop the grind function.

TRIMMING THE DOSE

The Razor™ precision dose trimming tool allows you to trim the puck to the right level for a consistent extraction.

the Razor

Precision dose trimming tool

Insert the Razor™ into the coffee basket until the shoulders of the tool rest on the rim of the filter basket. The blade of the dosing tool should penetrate the surface of the tamped coffee.

Rotate the Razor™ dosing tool back and forth while holding the portafilter on an angle over the knock box to trim off excess coffee.

Setting the Grind Size

The grind size will affect the rate of water flow through the coffee in the filter basket and the flavour of the espresso. When setting the grind size, it should be fine but not too fine and powdery.

AUTOMATIC DOSING

Push and release the portafilter to activate the grinding switch, then allow the portafilter to be dosed with fresh ground coffee.

To stop the grinding function during single or double dose, simply press the filter size button.

Tamping the Ground Coffee

Once the grind function has been completed, carefully withdraw the portafilter from the grinding cradle, being careful not to spill any ground coffee, tap down to collapse and using the integrated tamper, tamp down firmly (approx. 15–20 kg of pressure).

Your coffee filter basket is now dosed with the correct amount of coffee.

12

 

13

 

 

 

Image 7
Contents Barista Express On the purchase of your new Breville Product CongratulationsImportant safeguards Dose Trimming Tool Adjustable Temperature ControlKnow Automatic DosingMechanical Clutch Protection Grind Size Selector Power ButtonCup Warming Tray Clean ME Light Automatic DosingFirst USE OperatingBefore First Use Conditioning the Water FilterTrimming the Dose Manual DosingResetting Default Volumes PRE-PROGRAMMED Shot Volume 1 CUPProgramming Single Espresso Using HOT Water Outlet Using the Steam DialAuto Purge Adjusting Water Temperature Advanced ModeGrind Coffee Making Tips PreparationPRE-HEATING Single Wall FiltersExtracting Espresso Coffee Dose and TampingPurging the Group Head Inserting the PortafilterHints & Tips Care & CleaningCleaning Cycle Process Guide INSTALLING/REPLACING Filter in the Water TankCleaning Cycle Portafilter CleaningDecalcifying the Machine Cleaning the Conical Burr GrinderAdvanced Cleaning for the Conical Burr Grinder Concentrated Solution for harder waterCleaning the Storage Tray Cleaning the Steam WandCleaning the Outer Housing / CUP Warming Plate Cleaning the Drip Tray Storing Your MachineTroubleshooting Machine is making Grinder safety clutch hasCoffee is too cold No cremaTexturing When micro switch isNo steam is generated Milk is not creamy afterRistretto Coffees to TRYCappuccino Espresso

BES870 specifications

The Breville BES870, commonly known as the Barista Express, is a standout espresso machine that combines style, functionality, and efficiency, making it a favorite among coffee enthusiasts. This all-in-one machine not only allows users to grind their coffee beans fresh for each brew but also provides extensive control over the brewing process, ensuring a rich and personalized coffee experience.

One of the main features of the Barista Express is its built-in conical burr grinder. This grinder allows you to select the grind size and dose your coffee directly into the portafilter. With a choice of grind settings, the user can achieve their preferred consistency, from fine for espresso to coarser for other brewing methods. The grind size dial is simple to operate, making it easy to adjust according to various coffee types.

The machine boasts a powerful 15-bar Italian pump that ensures optimal water pressure during extraction. This is critical in producing a rich and aromatic espresso shot. Coupled with the thermocoil heating system, it provides quick heat-up times and stable temperatures essential for consistent brewing results. This is complemented by a pre-infusion function that gently expands the coffee grounds before full-pressure extraction, yielding a more balanced flavor.

Another notable characteristic of the Breville BES870 is its steam wand. The steam wand allows users to create microfoam for lattes and cappuccinos, which can elevate home coffee preparation to café-quality. With its intuitive design, the steam wand easily rotates for effortless frothing and texturing of milk.

The machine also features an integrated drip tray and a removable water tank, which holds up to 67 ounces, allowing for multiple brews before refilling. An informative LCD screen displays important brewing information such as grind size, shot time, and water temperature, ensuring users have all the necessary data at their fingertips for perfecting their brewing techniques.

In terms of design, the Breville Barista Express has an aesthetically pleasing stainless-steel exterior that not only looks professional but also ensures durability. The thoughtful construction, combined with its user-friendly controls, makes it suitable for both novice baristas and seasoned coffee lovers alike.

In summary, the Breville BES870 Barista Express is a sophisticated espresso machine that embodies the perfect blend of technology, design, and user control, making it an ideal choice for anyone looking to elevate their coffee game at home.