Emerson AV301 owner manual Subwoofer

Page 17

Speaker Positioning Information (Continued)

The center speaker, as well as the other 4 satellites, can be positioned either vertically or horizontally. Since the center speaker may look more aesthetically pleasing in the horizontal position we have omitted the name plate from the front of the center speaker. We have also included 20 pieces of rubber feet, 4 pieces per satellite speaker, in a small plastic bag with the other accessories. Once you decide how you are going to position the speakers you can put the rubber feet on the bottom of each speaker to prevent them from sliding too easily or perhaps from vibrating if they are sitting on a very smooth surface and the set is being played at high volume. Remove the backing paper from each rubber foot to expose the sticky surface and press the foot firmly into place on the bottom surface of each satellite speaker. Place one foot in each corner of the bottom surface. It is not necessary to use the rubber feet on any of the satellites that will be wall mounted.

The left front, right front, and center speakers should be placed at roughly the same height. The center speaker reproduces most of the dialog spoken by the actors on the TV screen, therefore it should be placed either directly above or below the center of the TV screen. Once you position the center speaker try to position the left front and right front speakers at the same height. It is not recommended to place any of the satellite speakers on the floor.

The left rear and right rear speakers can be placed in line with your listening position or behind your listening position. Ideally they should be placed slightly above your ear level when you are seated in your normal listening position. We have provided 2-way keyhole openings on the backs of all the satellite speakers that allow the satellites to be wall mounted in either a vertical or horizontal position.

SATELLITE SPEAKERS

VERTICAL OR HORIZONTAL

INSTALL RUBBER FEET AS SHOWN

Left Front

Right Front

Center

POSITION FRONT/CENTER SPEAKERS

APPROXIMATELY SAME HEIGHT

2-WAY

MOUNTING HOLES

The powered subwoofer will provide the most dramatic bass effects when it is placed on the floor. Do not place the subwoofer on a stand or table. Remember that the subwoofer has its own AC cord and must be connected to an AC outlet in addition to being connected to the main unit. When the subwoofer is connected to the AC outlet the LED indicator on the front panel turns red. This indicates that the subwoofer is receiving power and is in the Standby mode. If the system is turned on and operating the subwoofer will automatically switch from the Standby mode to the Active mode whenever it is needed. The LED turns green when the subwoofer is in the Active mode. When no longer needed the subwoofer returns to the Standby mode and the LED indicator turns red again. There is no power switch on the subwoofer. It draws very little current when in the Standby mode so it should always remain connected to the AC outlet. The subwoofer should be placed in the front of the room so that it is facing toward your listening position. It can be placed on either side of the TV or even in the corner of the room, as far away as the cable and the AC cord will allow. The bass sounds from the subwoofer are non-directional. You will not really be able to tell where the bass is coming from.

SUBWOOFER

OK

PLACE ON FLOOR

NO

GOOD

NOT ON STAND

16

Image 17
Contents AV301 Welcome Refer servicing to qualified service personnel onlyTable of Contents Index to Parts and Controls Memory indicator Sleep indicatorMono indicator Stereo indicatorVideo OUT jack AM antenna terminalVolume + or buttons page 18 10 / Tuning +/- buttons page 19Angle button Menu buttonImportant Safeguards and Precautions Important Information Regarding This Manual Features of This SystemType of Disc That Can be Played on This System Disc installing precautions Disc handling precautionsDisc cleaning precautions Unpacking InstallationsInserting Batteries into the Remote Control Speaker System Connection If you have poor FM reception Tips for connecting antenna and speakers wiresAntenna Connections TV and Optional Component Connections Connecting the AC Power CordBasic System Set Up Subwoofer Subwoofer Phase Switch Typical Speaker Set UpAdjusting The Speaker Levels Test Tone Changing Preset Stations Presetting Radio StationsRecalling Preset Stations Basic Playback Playing DiscsFrame By Frame Advance Slow Motion PlaybackLocate a Point Quickly Skip Next or PreviousUsing the DVD menu Using the title menuUsing the root menu Understanding the Individual DVD Disc MenuRepeat Repeat PlaybackStop Program Play Audio CDs onlySelecting a Start Point by Chapter or Time Code Selecting a Track Using Number ButtonsWhen playing back an MP3 encoded CD Checking Disc Information Using Display ButtonWhen playing back a DVD Using the Setup Menu Navigation Buttons Settings AdjustmentsSetup Menu Listing NORMAL/PS NORMAL/LB Wide TV Display SettingAngle Mark Setting Video Output SettingSelecting the On Screen Display OSD Language Selecting the Audio Out Output ModeAudio Mode Setting Screen Saver Setting SCR SaverCenter Delay Setting Center Speaker SettingRear Speaker Setting Rear Delay SettingBass Mode Setting Dynamic Range Setting Dual Mono SettingSelecting the Language for Disc Menu Selecting the Language for AudioSelecting the Language for Subtitles Changing the Parental Control Password Setting the Parental Control LevelReturning to the Original Factory Default Settings Resetting the Parental Control PasswordSpecial Functions Adjusting the Volume and Tone ControlsZoom Zoom OFF Adjusting the Volume and Tone Controls Picture ZoomingAudio Language Selection Angle SelectionListening to the Radio To listen to preset radio stationsOther Functions To improve reception Listening to an External SourceIf an FM program is noisy Sleep Selecting Listening Modes Using the Sleep TimerNo power TroubleshootingAdditional Information No pictureAngles cannot be changed when you play a DVD Subtitles cannot be turned off when you play a DVDLeft and right sounds are unbalanced or reversed Severe hum or noise is heardGlossary Video SpecificationsGeneral Emerson Radio Corp Limited Warranty Emerson Radio Corp

AV301 specifications

The Emerson AV301 is a versatile and innovative device designed for optimal performance in various applications across industries. Its robust features and cutting-edge technology make it an ideal solution for process automation and control, enhancing efficiency and productivity.

One of the standout features of the AV301 is its advanced control capabilities. The device is equipped with a high-speed processor that enables quick data processing and real-time response to changing environmental conditions. This ensures that operations remain smooth and efficient, reducing downtime and increasing overall productivity.

Another key characteristic of the Emerson AV301 is its user-friendly interface. The device includes a large, intuitive touchscreen that simplifies configuration and monitoring, allowing operators to easily access critical information and make adjustments as needed. This focus on usability helps to minimize training time for new users, facilitating faster onboarding and reducing errors in operation.

Moreover, the AV301 incorporates state-of-the-art communication technologies. It supports multiple communication protocols, including Ethernet, Modbus, and Profibus, enabling seamless integration with existing systems and devices. This flexibility allows users to customize their setup according to specific needs while ensuring compatibility across diverse operations.

In terms of safety and reliability, the Emerson AV301 is designed to meet rigorous industry standards. It features built-in redundancy and fail-safe mechanisms, which help to minimize risks and protect against unexpected failures. This level of reliability is crucial for industries where downtime can lead to significant financial losses or safety hazards.

Additionally, the device offers extensive diagnostic and monitoring capabilities. It includes advanced algorithms that provide detailed insights into system performance, allowing teams to proactively identify and resolve potential issues before they escalate. This predictive maintenance approach not only enhances reliability but also optimizes resource allocation and scheduling.

The Emerson AV301 is also environmentally conscious, designed with energy efficiency in mind. Its low-power consumption features help reduce operational costs and contribute to a greener footprint.

In summary, the Emerson AV301 is a powerful tool for process automation, equipped with advanced control features, a user-friendly interface, flexible communication options, and a commitment to safety and efficiency. Its diagnostic capabilities and energy-efficient design further enhance its value, making the AV301 a top choice for industries aiming to optimize their operations. With the Emerson AV301, businesses can leverage technology to drive performance and ensure sustainable growth.