Emerson AV301 owner manual Selecting a Start Point by Chapter or Time Code

Selecting a Start Point by Chapter or Time Code

Note:

•This function is not available for CD and MP3.

		STANDBY
		DVD	TUNER	AUX
	S UB	LANGUAGE	TI TLE	RETURN
	TITLE
GO TO	GO TO		MENU	ANGLE
	1	2	3	AUDIO
Number	4	5	6	DISPLAY
buttons	7	8	9	N/P
	> 10	0	SLEEP	MUTE
	SETUP			O PE N/
				C LO SE
ENTER		EN TER
	STOP			PLAY/PAUSE
			STEP
	STA -	STA +	ST/MO	+
			SLOW	ADJ/VOL
	TUN	TUN +	MEMO
	REPEAT	A-B	PROG.	SELECT
			TEST	LISTENING
			TONE

TO SELECT A STARTING CHAPER

1 Press the GO TO button. The following menu appears on the TV screen.

TITLE 02 / 05 CHAPTER 001 / 006

2 Use the or button to select title number or chapter number.

TITLE	02 / 05		CHAPTER	001	/ 006
TITLE	02	/ 05	CHAPTER	001 / 006

Use the number buttons (0~9 / >10) to input the title or chapter number you want.

3 Press ENTER to play your selection.

TO SELECT A STARTING TIME:

You can search by inputting the time code.

The time code corresponds to the approximate actual playing time. For example, to search for a scene 2 hours 30 minutes 20 seconds past the beginning, key in 02:30:20.

1 Press the GO TO button twice to enter time menu as shown below.

TITLE 02 / 05 TIME - - : - - : - -

2 Use the number buttons (0~9 / >10) to input the the desired time code.

For example, key in 0, 1, 2, 3, 4, 5.

TITLE 02 / 05 TIME 01 : 23 : 45

3 Press ENTER to start playing (from the point of 01:23:45).

4 Press the GO TO button again to exit time menu screen.

Notes:

•If the title number, chapter number or time code you input does not exist on the disc, the system will not execute your selection and the selecting menu will disappear.

•The selecting menu will disappear within a few seconds if you do not input a valid number.

Selecting a Track Using Number Buttons

You can select a track directly using the number (0~9 / >10) buttons

•In play or stop mode, press the number button to select the track you want. The system will go to the beginning of the selected track and start playing it.

•If the track number is more than 10, use the >10 button. The number will increase by 10 whenever you press >10 once. For example, you want to select the track number 25, press the >10 button twice, then press 5 button.

Note:

•This function is not available for DVD.

25