KitchenAid 9.76E+13 Before you start, Tools needed, Parts supplied, Mobile home installation

Page 2

Before you start...

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.” These words mean:

DANGER

You can be killed or seriously injured if you don'timmediately follow instructions.

WARNING

You can be killed or seriously injured if you don't follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

IMPORTANT: Observe all governing codes and ordinances. Failure to meet codes and ordinances could lead to fire or electrical shock.

Proper installation is your responsibility. A qualified technician must install this range. Make sure you have everything necessary for correct installation. It is the installer’s responsibility to comply with installation clearances specified on the model/serial rating plate. The model/serial rating plate is located on the oven frame behind the storage drawer panel.

Check location where range will be installed. The range should be located for convenient use in kitchen.

To eliminate the risk of burns or fire by reaching over heated surface units, cabinet storage space located above the surface units should be avoided. If cabinet storage is to be provided, the risk can be reduced by installing a range hood that projects horizontally a minimum of 5 inches beyond the bottom of the cabinets.

All openings in the wall or floor where ranges is to be installed must be sealed.

Cabinet opening dimensions that are shown must be used. Given dimensions are minimum clearances.

Grounded electrical outlet is required. See “Electrical requirements” section.

Mobile home installation

The installation of this range must conform with the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280 [formerly the Federal Standard for Mobile Home Construction and Safety, Title 24, HUD (Part 280)] or, when such standard is not applicable, the Standard for Manufactured Home Installations, ANSI A225.1/NFPA 501A*, or with local codes.

When this range is installed in a mobile home, it must be secured to the floor during transit. Any method of securing the range is adequate as long as it conforms to the standards listed above.

Four-wire power supply cord or cable must be used in a mobile home installation. The appliance wiring will need to be revised. See “Four-wire electrical connection” section.

The floor anti-tip bracket must be

installed. To install

the anti-tip bracket shipped with the range, see Page 5 and

the anti-tip bracket template.

Copies of the standards listed may be obtained from:

*National Fire Protection Association One Batterymarch Park

Quincy, Massachusetts, 02269

Tools needed:

Follow all factory safety instructions included with your tools.

level

flat-blade screwdriver

3/8" drive ratchet

3/8" and 5/16" nut drivers

hand or electric drill

channel lock pliers

safety glasses

gloves

measuring tape or ruler

wood floors: 1/8" drill bit

concrete/ceramic floors:

3/16" carbide-tipped masonry drill bit (Hammer may be needed for anchors.)

Parts supplied:

Not shown:

literature pack

2 plastic anchors

2 screws

floor-mounted

anti-tip bracket

(#10 x 1-1/2")

 

Brackets must be securely mounted to sub-floor. Thickness of flooring may require longer screws to anchor bracket to sub-floor. Longer screws are available from your local hardware store.

2

Image 2
Contents Installation Instructions Table of ContentsTools needed Mobile home installationBefore you start Parts suppliedProduct dimensions Cabinet dimensions/requirementsElectrical requirements If connecting to a four-wire systemIf connecting to a three-wire system Recommended ground methodNow start Electrical connectionThree-wire electrical connection Power supply cord methodFour-wire electrical connection Direct wire method Copper or Aluminum wire Operating position 8888 Check operationIf you need assistance If you need serviceIf range does not operate Moving the rangePage Home Appliances

9.76E+13 specifications

The KitchenAid 9.76E+13, part of the renowned KitchenAid brand, is a premium stand mixer that embodies the perfect blend of style, performance, and versatility for both amateur and professional chefs. This mixer is designed to be a kitchen workhorse, transforming the way you prepare food, thanks to its advanced features and user-friendly functionality.

One of the standout characteristics of the KitchenAid 9.76E+13 is its powerful motor. With a robust wattage that ensures consistent performance, this mixer can handle even the toughest ingredients with ease. From kneading dough for bread to whipping egg whites into stiff peaks, its motor delivers the torque needed to accomplish a wide variety of tasks without straining.

The iconic tilt-head design is another defining feature, allowing easy access to the mixing bowl and the attachment hub. This design not only simplifies the process of adding ingredients but also makes it easy to switch between different attachments for food preparation. The mixer comes equipped with versatile attachments, including a flat beater, dough hook, and wire whip, which cater to a range of mixing requirements, further enhancing its functionality.

The construction quality of the KitchenAid 9.76E+13 is impressive, with a durable metal body that provides stability during operation and longevity over time. Available in various attractive colors, this mixer adds a touch of elegance to any kitchen décor.

Technological features play a significant role in improving user experience. The mixer has a multi-speed setting, allowing you to select the appropriate speed based on the task at hand. This control enables precision mixing, reducing the chances of over-mixing or under-mixing. Additionally, the bowl-lift mechanism, in some models, allows for even larger mixing capacities, accommodating anything from small batches to large family-size recipes.

Convenience is a key aspect of this mixer, as it is designed to allow easy cleanup. The bowl and attachments are dishwasher-safe, making post-cooking cleanup effortless.

Overall, the KitchenAid 9.76E+13 stands out in the realm of culinary appliances, blending power, precision, and design. With its innovative features and high-quality construction, it serves as an indispensable tool for any culinary enthusiast, simplifying meal preparation while inspiring creativity in the kitchen. Investing in this mixer not only enhances your cooking experience but also elevates the standards of your culinary creations, making it an essential addition to any home chef’s arsenal.