Direct wire method Copper or Aluminum wire

Direct wire method: Copper or Aluminum wire

NOTE: The bag containing three aluminum terminal lugs must be used when making a direct wire connection.

WARNING

Electrical Shock Hazard

Disconnect power before servicing.

Use 8 gauge copper wire, or 6 gauge aluminum wire.

Electrically ground range.

Failure to follow these instructions can result in death, fire, or electrical shock.

This range may be connected directly to the fuse disconnect or circuit breaker box; or with a U.L.-listed, 40 amp range power supply cable. Depending on your electrical supply, make the required three-wire or four-wire connection.

1.Disconnect power.

2.Remove the knockout as needed for conduit connection.

3. Assemble a

U.L.-listed

conduit	U.L.-listed
connector in	conduit
opening.	connector
opening.

4.Strip outer covering back 3 inches to expose wires. Strip the insulation back 1 inch from the end of each wire.

5.Allow enough slack in the wire to easily attach the wiring terminal block.

6.Use 3/8" nut driver and remove the outside nuts on the terminal block screws. Do not loosen the factory- tightened nuts behind the outside nuts.

7.IMPORTANT: the aluminum terminal lugs must be assembled to the terminal posts with the set screws facing out as shown.

8.Attach three aluminum terminal lugs to terminal posts.

Use a 3/8" nut driver and tighten the nuts securely. Nuts must be tightened to 20 in/lbs of torque for proper electrical connection.

9.Complete electrical connection according to your type electrical supply (“Four-wire electrical connection” or “Three-wire electrical connection.”)

Four-wire electrical connection:

ground

link

ground screw

Figure 1

slotted set screw

line 1	neutral
	(center wire)

green

groundline 2 wire

Figure 2

Use this method for new installations, mobile homes, recreational vehicles and whenever four-wire installation is required.

10.Remove the ground-link screw from the range frame. Save the ground-link screw and cup washer. Bend up the ground link so that it does not contact the range. See Figures 1 and 2.

11.Connect the green ground wire to the range using the ground-link screw and cup washer. The ground wire must be attached first and must not contact any other terminal. See Figure 2.

12.Loosen (do not remove) the 3 slotted set screws. Insert the neutral (white) wire into the hole at the bottom of the center position lug (attached to center terminal screw black terminal block). See Figure 2.

13.Connect the other two wires (lines 1 and 2) to the outer aluminum lugs.

14.Securely tighten the set screws. For 8 gauge copper wire, tighten to 25 in/lbs of torque, and for 6 gauge aluminum wire, tighten to 35 in/lbs of torque to make a proper electrical connection. See Figure 2.

15.Tighten the locking ring of the conduit connector.

16.Replace the terminal block cover.

Three-wire electrical connection:

	slotted
	set screw
	neutral
line 1	(center wire)
	line 2

Figure 3

Use this method only if local codes permit connecting ground conductor to neutral supply wire.

10.Loosen (do not remove) the 3 slotted set screws. Insert the neutral (white) wire into the hole at the bottom of the center position lug (attached to center terminal screw of terminal block). See Figure 3.

11.Connect the other two wires (lines 1 and 2) to the outer aluminum lugs.

12.Securely tighten the set screws. For 8 gauge copper wire, tighten to 25 in/lbs of torque, and for 6 gauge aluminum wire, tighten to 35 in/lbs of torque to make a proper electrical connection. See Figure 3.

13.Tighten the locking ring of the conduit connector.

14.Replace the terminal block cover.

aluminum lug

terminal screw

set screw must face out

9.76E+13 specifications

The KitchenAid 9.76E+13, part of the renowned KitchenAid brand, is a premium stand mixer that embodies the perfect blend of style, performance, and versatility for both amateur and professional chefs. This mixer is designed to be a kitchen workhorse, transforming the way you prepare food, thanks to its advanced features and user-friendly functionality.

One of the standout characteristics of the KitchenAid 9.76E+13 is its powerful motor. With a robust wattage that ensures consistent performance, this mixer can handle even the toughest ingredients with ease. From kneading dough for bread to whipping egg whites into stiff peaks, its motor delivers the torque needed to accomplish a wide variety of tasks without straining.

The iconic tilt-head design is another defining feature, allowing easy access to the mixing bowl and the attachment hub. This design not only simplifies the process of adding ingredients but also makes it easy to switch between different attachments for food preparation. The mixer comes equipped with versatile attachments, including a flat beater, dough hook, and wire whip, which cater to a range of mixing requirements, further enhancing its functionality.

The construction quality of the KitchenAid 9.76E+13 is impressive, with a durable metal body that provides stability during operation and longevity over time. Available in various attractive colors, this mixer adds a touch of elegance to any kitchen décor.

Technological features play a significant role in improving user experience. The mixer has a multi-speed setting, allowing you to select the appropriate speed based on the task at hand. This control enables precision mixing, reducing the chances of over-mixing or under-mixing. Additionally, the bowl-lift mechanism, in some models, allows for even larger mixing capacities, accommodating anything from small batches to large family-size recipes.

Convenience is a key aspect of this mixer, as it is designed to allow easy cleanup. The bowl and attachments are dishwasher-safe, making post-cooking cleanup effortless.

Overall, the KitchenAid 9.76E+13 stands out in the realm of culinary appliances, blending power, precision, and design. With its innovative features and high-quality construction, it serves as an indispensable tool for any culinary enthusiast, simplifying meal preparation while inspiring creativity in the kitchen. Investing in this mixer not only enhances your cooking experience but also elevates the standards of your culinary creations, making it an essential addition to any home chef’s arsenal.