KitchenAid 9.76E+13 installation instructions Electrical requirements, Recommended ground method

Page 4

Electrical requirements

If codes permit and a separate ground wire is used, it is recommended that a qualified electrician determine that the ground path and wire gauge are in accordance with local codes.

This range must be connected to a grounded metal, permanent wiring system.

Check with a qualified electrician if you are not sure range is properly grounded.

Do not ground to a gas pipe.

Do not have a fuse in the neutral or ground circuit.

Range must be connected to the proper electrical voltage and frequency as specified on the model/serial rating plate. (The model/serial rating plate is located on the oven frame behind the storage drawer panel.)

A four-wire or three-wire, single- phase, 120/240-volt, 60-Hz, AC-only, electrical supply (or three-wire or four- wire 120/208-volt if specified on the model/serial rating plate) is required on a separate, 40 amp circuit, fused on both sides of the line.

A time-delay fuse or circuit breaker is recommended.

The range can be connected directly to the fused disconnect (or circuit breaker box) through flexible armored conduit.

This range can be direct wired to a four- wire or three-wire aluminum wiring system. See “Direct wire method: Copper or Aluminum wire” section.

Allow two to three feet of slack in the line so that it can be moved if servicing is ever necessary.

A U.L.-listed conduit connector must be provided at each end of the power supply cable (at the range and at the junction box).

Wire sizes and connections must conform with the rating of the range (40 amps).

The wiring diagram is located on the back of the range or on the inside of the storage drawer in a clear plastic bag.

Recommended ground method

It is the personal responsibility and obligation of the customer to contact a qualified electrician to assure that the electrical installation is adequate and is in conformance with the National Electrical Code, ANSI/NFPA 70 — latest edition* and all local codes and ordinances.

Power supply cord is not supplied, but is available through your local electrical supply house.

Copies of the standards listed may be obtained from:

*National Fire Protection Association One Batterymarch Park

Quincy, Massachusetts, 02269

If connecting to a four-wire system:

This range is manufactured with the ground connected to the cabinet. The ground must be revised so the green grounding wire of the four-wire power supply cord is connected to the cabinet. See “Four-wire electrical connection” section.

When a four-wire receptacle of NEMA Type 14-50R is used (see Figure 1, below), a matching U.L.-listed, four-wire, 250-volt, 40 amp, range power supply cord (pigtail) must be used. This cord contains four copper conductors with either ring terminals or spade terminals with upturned ends to connect the power supply at the appliance end, terminating in a NEMA Type 14-50P plug on the supply end. The fourth (grounding) conductor must be identified by a green or green/yellow cover and the neutral conductor by a white cover. Cord should be Type SRD or SRDT with a U.L.-listed strain relief and be at least four feet long. The minimum conductor sizes for the copper four-wire power cord are:

40 amp circuit

2 No.-8 conductors

1 No.-10 white neutral

1 No.-8 green grounding

If connecting to a three-wire system:

Local codes may permit the use of a U.L.-listed, 250-volt, 40 amp range power supply cord (pigtail). This cord contains three, No.-10 copper wires and matches a three-wire receptacle of NEMA Type

10-50R, shown in Figure 2. Connectors on the appliance end must be provided at the point the power supply cord enters the appliance.

4-wire wall

3-wire wall

receptacle (14-50R)

receptacle (10-50R)

Figure 1

Figure 2

4

Image 4
Contents Installation Instructions Table of ContentsMobile home installation Before you startTools needed Parts suppliedProduct dimensions Cabinet dimensions/requirementsIf connecting to a four-wire system If connecting to a three-wire systemElectrical requirements Recommended ground methodNow start Electrical connectionFour-wire electrical connection Power supply cord methodThree-wire electrical connection Direct wire method Copper or Aluminum wire Operating position 8888 Check operationIf you need service If range does not operateIf you need assistance Moving the rangePage Home Appliances

9.76E+13 specifications

The KitchenAid 9.76E+13, part of the renowned KitchenAid brand, is a premium stand mixer that embodies the perfect blend of style, performance, and versatility for both amateur and professional chefs. This mixer is designed to be a kitchen workhorse, transforming the way you prepare food, thanks to its advanced features and user-friendly functionality.

One of the standout characteristics of the KitchenAid 9.76E+13 is its powerful motor. With a robust wattage that ensures consistent performance, this mixer can handle even the toughest ingredients with ease. From kneading dough for bread to whipping egg whites into stiff peaks, its motor delivers the torque needed to accomplish a wide variety of tasks without straining.

The iconic tilt-head design is another defining feature, allowing easy access to the mixing bowl and the attachment hub. This design not only simplifies the process of adding ingredients but also makes it easy to switch between different attachments for food preparation. The mixer comes equipped with versatile attachments, including a flat beater, dough hook, and wire whip, which cater to a range of mixing requirements, further enhancing its functionality.

The construction quality of the KitchenAid 9.76E+13 is impressive, with a durable metal body that provides stability during operation and longevity over time. Available in various attractive colors, this mixer adds a touch of elegance to any kitchen décor.

Technological features play a significant role in improving user experience. The mixer has a multi-speed setting, allowing you to select the appropriate speed based on the task at hand. This control enables precision mixing, reducing the chances of over-mixing or under-mixing. Additionally, the bowl-lift mechanism, in some models, allows for even larger mixing capacities, accommodating anything from small batches to large family-size recipes.

Convenience is a key aspect of this mixer, as it is designed to allow easy cleanup. The bowl and attachments are dishwasher-safe, making post-cooking cleanup effortless.

Overall, the KitchenAid 9.76E+13 stands out in the realm of culinary appliances, blending power, precision, and design. With its innovative features and high-quality construction, it serves as an indispensable tool for any culinary enthusiast, simplifying meal preparation while inspiring creativity in the kitchen. Investing in this mixer not only enhances your cooking experience but also elevates the standards of your culinary creations, making it an essential addition to any home chef’s arsenal.