KitchenAid W10635370A Location Requirements, Electrical Requirements, Water Supply Requirements

Page 4

Location Requirements

WARNING

Explosion Hazard

Keep flammable materials and vapors, such as gasoline, away from refrigerator.

Failure to do so can result in death, explosion, or fire.

IMPORTANT: This refrigerator is designed for indoor, household use only.

To ensure proper ventilation for your refrigerator, allow for ¹⁄₂" (1.25 cm) of space on each side and at the top. Allow for 1"

(2.54 cm) of space behind the refrigerator. If your refrigerator has an ice maker, allow extra space at the back for the water line connections. When installing your refrigerator next to a fixed wall, leave 2¹⁄₂" (6.3 cm) minimum on the hinge side (some models require more) to allow for the door to swing open.

NOTE: This refrigerator is intended for use in a location where the temperature ranges from a minimum of 55°F (13°C) to a maximum of 110°F (43°C). The preferred room temperature range for optimum performance, which reduces electricity usage and provides superior cooling, is between 60°F (15°C) and 90°F (32°C). It is recommended that you do not install the refrigerator near a heat source, such as an oven or radiator.

¹⁄₂" (1.25 cm)

2¹⁄₂" (6.3 cm)

Electrical Requirements

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

Before you move your refrigerator into its final location, it is important to make sure you have the proper electrical connection.

Recommended Grounding Method

A 115 Volt, 60 Hz., AC only 15- or 20-amp fused, grounded electrical supply is required. It is recommended that a separate circuit serving only your refrigerator be provided. Use an outlet that cannot be turned off by a switch. Do not use an extension cord.

NOTE: Before performing any type of installation, cleaning, or removing a light bulb, turn Cooling OFF. Press both the Refrigerator Minus (-) button and the Freezer Minus (-) button until the word OFF appears in each display. Disconnect the refrigerator from the electrical source. When you are finished, reconnect the refrigerator to the electrical source and reset the temperature controls to the desired setting. See “Using the Controls.”

Water Supply Requirements

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.

TOOLS NEEDED:

■

Flat-blade screwdriver

■

¹⁄₄" Nut driver

■

⁷⁄₁₆" and ¹⁄₂" Open-end or two

■

¹⁄₄" Drill bit

 

adjustable wrenches

■

Cordless drill

 

 

IMPORTANT:

■All installations must meet local plumbing code requirements.

■Do not use a piercing-type or ³⁄₁₆" (4.76 mm) saddle valve which reduces water flow and clogs more easily.

■Use copper tubing and check for leaks. Install copper tubing only in areas where the household temperatures will remain above freezing.

■For models with water filters, the disposable water filter should be replaced at least every 6 months.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Refrigerator User Instructions Refrigerator Safety Your safety and the safety of others are very importantInstallation Instructions Clean Before UsingUnpack the Refrigerator Before You Throw Away Your Old Refrigerator or FreezerLocation Requirements Electrical RequirementsWater Supply Requirements Recommended Grounding MethodConnect the Water Supply Water PressureReverse Osmosis Water Supply Connect to Water LineConnect to Refrigerator Complete the InstallationStyle Refrigerator Doors and Drawer Door Removal and Replacement Door Closing and Door Alignment Refrigerator USEOpening and Closing Doors Using the Controls Crisper Humidity Control Ice MakerWater Dispenser Water Filtration SystemCleaning To Clean Your RefrigeratorRefrigerator Care Changing the Light BulbIf You Choose to Turn Off the Refrigerator Before You Leave Vacation and Moving CareMoving Troubleshooting Refrigerator OperationTemperature and Moisture Ice and WaterAccessories Water Filter CertificationsWater is leaking from the dispenser system Water from the dispenser is warmPerformance Data Sheets Application Guidelines/Water Supply ParametersModel UKF8001AXX-200 Capacity 200 Gallons 757 Liters Kitchenaid Refrigerator Warranty This limited warranty does not coverPage Instructions Dutilisation DU Réfrigérateur Sécurité DU RéfrigérateurInstructions D’INSTALLATION Déballage du réfrigérateurAvant de jeter votre vieux réfrigérateur ou congélateur Dépose des matériaux d’emballageExigences demplacement Méthode recommandée de mise à la terreSpécifications électriques Nettoyage avant l’utilisationSpécifications de l’alimentation en eau Raccordement de la canalisation deauPression de leau Alimentation en eau par osmose inverseAchever l’installation Raccordement au réfrigérateurPortes et tiroir du réfrigérateur Dépose et réinstallation des portes Fermeture et alignement de la porte Utilisation DU RéfrigérateurOuverture et fermeture des portes Utilisation des commandes Réglage de lhumidité dans Le bac à légumes Machine à glaçonsDistributeur d’eau Système de filtration de leauRemplacement de l’ampoule d’éclairage Entretien DU RéfrigérateurNettoyage Entretien avant les vacances ou Lors d’un déménagementDépannage Fonctionnement du réfrigérateurDéménagement Le réfrigérateur ne fonctionne pasTempérature et humidité Glaçons et eauAccessoires Feuilles DE Données SUR LA Performance Système de filtration d’eau intérieurModèle UKF8001AXX-200 /Capacité 200 gallons 757 litres Garantie DU Réfrigérateur Kitchenaid Garantie LimitéeW10635370A SP PN W10635371A 11/13

W10635370A specifications

The KitchenAid W10635370A is a premium stand mixer accessory that serves as a versatile tool for both professional and home bakers alike. Designed to enhance the performance of the KitchenAid stand mixers, this attachment embodies the brand’s commitment to quality, durability, and functionality.

One of the main features of the W10635370A is its high-quality construction. Made from durable materials, it offers longevity and is resistant to wear and tear, ensuring it withstands the rigors of frequent use. The stainless-steel design not only provides a sleek, modern aesthetic but also guarantees easy cleaning and maintenance. Simply place it in the dishwasher for hassle-free sanitization.

This attachment is crafted to boost the mixing capabilities of KitchenAid stand mixers by providing a reliable and efficient mixing experience. The powerful motor compatibility ensures that it can handle a variety of ingredients, from dense doughs to delicate batters. The design allows for thorough mixing without leaving lumps, which is crucial for achieving the perfect texture in baked goods.

Another notable technology integrated into the KitchenAid W10635370A is its reliable locking mechanism. This feature ensures that the attachment stays securely in place during operation, allowing for a stable and consistent mixing performance. Furthermore, users will appreciate the ease with which the attachment can be mounted and dismounted, making switching between different tasks a breeze.

The W10635370A also excels in its versatility. It is compatible with a range of KitchenAid stand mixer models, which makes it an excellent investment for those who already own or plan to purchase a KitchenAid mixer. From kneading dough to whipping cream, this attachment helps streamline the cooking process, saving both time and effort.

In conclusion, the KitchenAid W10635370A is an essential kitchen accessory for those who value efficiency and quality in their cooking. Its robust construction, user-friendly design, and versatility make it an ideal choice for anyone looking to elevate their baking and cooking experience. Whether you are a seasoned chef or a novice home cook, this attachment is sure to meet your culinary needs and help you create delightful dishes with ease.
Top Page Image Contents