KitchenAid W10635370A installation instructions Refrigerator Doors and Drawer

Page 7

Refrigerator Door(s) and Drawer

All graphics referenced in the following instructions are included later in this section after “Final Steps.”

TOOLS NEEDED: ⁵⁄₁₆", ³⁄₈", ¹⁄₄" hex head socket wrenches, #2 Phillips screwdriver, and a flat-blade screwdriver.

Remove and Replace Handles

1.Using a ³⁄₃₂" hex key, loosen the two setscrews located on the side of each handle. See graphics 1 and 2.

2.Pull the handle straight out from the door. Make sure you keep the screws for reattaching the handles.

3.To replace the handles, reverse the directions.

3.Align the door so that the bottom of the refrigerator door aligns evenly with the top of the freezer drawer. Tighten all screws.

4.Reconnect the wiring plug on top of the left-hand side refrigerator door.

5.Replace the top hinge covers.

Remove and Replace Freezer Drawer Front

IMPORTANT: Two people may be required to remove and replace the freezer drawer front. Graphics are included later in this section.

Remove Doors and Hinges

IMPORTANT: Remove food and any adjustable door or utility bins from doors.

WARNING

Electrical Shock Hazard

Disconnect power before removing doors.

Failure to do so can result in death or electrical shock.

Remove Drawer Front

1.Open the freezer drawer to full extension.

2.Loosen the four screws attaching the drawer glides to the drawer front. See Drawer Front Removal graphic.

NOTE: Loosen screws three to four turns. Keep the screws in the drawer front.

3.Lift drawer front upward and off the screws. See Drawer Front Removal graphic.

Replace Drawer Front

1.Slide the drawer glides out of the freezer compartment. Insert the screws in the top of the drawer front into the slots in the drawer brackets. See Drawer Front Replacement graphic.

2.Pull the drawer brackets toward you to position the two screws in the bottom of the drawer front into the brackets. See Drawer Front Replacement graphic.

3.Completely tighten the four screws.

1.Unplug refrigerator or disconnect power.

2.Keep the refrigerator doors closed until you are ready to lift them free from the cabinet.

NOTE: Provide additional support for the refrigerator door while the hinges are being removed. Do not depend on the door gasket magnets to hold the door in place while you are working.

3.Starting with the right-hand side door, remove the parts for the top hinge as shown in Top Hinge graphic. Lift the refrigerator door from the bottom hinge pin.

NOTE: On some models, remove the shim from the bottom hinge pin and keep it for later use. See Bottom Hinge graphic.

4.Before removing the left-hand side door, disconnect the wiring plug located on top of the top hinge by wedging a flat-blade screwdriver or your fingernail between the two sections. See Wiring Plug graphic.

NOTE: The green, ground wire remains attached to the hinge.

5.Remove the parts for the top hinge as shown in Top Hinge graphic. Lift the left-hand side door from the bottom hinge pin.

NOTE: On some models, remove the shim from the bottom hinge pin and keep it for later use. See Bottom Hinge graphic.

Replace Doors and Hinges

1.Assemble the parts for the top hinge as shown in Top Hinge graphic. Do not tighten the screws completely.

2.Replace the parts for the bottom hinge as shown in Bottom Hinge graphic. Tighten screws. Replace the refrigerator door.

NOTE: Provide additional support for the refrigerator door while the hinges are being moved. Do not depend on the door gasket magnets to hold the door in place while you are working.

Final Steps

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

1.Plug into a grounded 3 prong outlet.

2.Return all removable door parts to doors and food to refrigerator.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Refrigerator User Instructions Your safety and the safety of others are very important Refrigerator SafetyBefore You Throw Away Your Old Refrigerator or Freezer Installation InstructionsClean Before Using Unpack the RefrigeratorRecommended Grounding Method Location RequirementsElectrical Requirements Water Supply RequirementsConnect to Water Line Connect the Water SupplyWater Pressure Reverse Osmosis Water SupplyConnect to Refrigerator Complete the InstallationStyle Refrigerator Doors and Drawer Door Removal and Replacement Door Closing and Door Alignment Refrigerator USEOpening and Closing Doors Using the Controls Ice Maker Crisper Humidity ControlWater Filtration System Water DispenserChanging the Light Bulb CleaningTo Clean Your Refrigerator Refrigerator CareIf You Choose to Turn Off the Refrigerator Before You Leave Vacation and Moving CareMoving Refrigerator Operation TroubleshootingIce and Water Temperature and MoistureWater from the dispenser is warm AccessoriesWater Filter Certifications Water is leaking from the dispenser systemApplication Guidelines/Water Supply Parameters Performance Data SheetsModel UKF8001AXX-200 Capacity 200 Gallons 757 Liters This limited warranty does not cover Kitchenaid Refrigerator WarrantyPage Sécurité DU Réfrigérateur Instructions Dutilisation DU RéfrigérateurDépose des matériaux d’emballage Instructions D’INSTALLATIONDéballage du réfrigérateur Avant de jeter votre vieux réfrigérateur ou congélateurNettoyage avant l’utilisation Exigences demplacementMéthode recommandée de mise à la terre Spécifications électriquesAlimentation en eau par osmose inverse Spécifications de l’alimentation en eauRaccordement de la canalisation deau Pression de leauRaccordement au réfrigérateur Achever l’installationPortes et tiroir du réfrigérateur Dépose et réinstallation des portes Fermeture et alignement de la porte Utilisation DU RéfrigérateurOuverture et fermeture des portes Utilisation des commandes Machine à glaçons Réglage de lhumidité dans Le bac à légumesSystème de filtration de leau Distributeur d’eauEntretien avant les vacances ou Lors d’un déménagement Remplacement de l’ampoule d’éclairageEntretien DU Réfrigérateur NettoyageLe réfrigérateur ne fonctionne pas DépannageFonctionnement du réfrigérateur DéménagementGlaçons et eau Température et humiditéAccessoires Système de filtration d’eau intérieur Feuilles DE Données SUR LA PerformanceModèle UKF8001AXX-200 /Capacité 200 gallons 757 litres Garantie Limitée Garantie DU Réfrigérateur Kitchenaid11/13 W10635370A SP PN W10635371A

W10635370A specifications

The KitchenAid W10635370A is a premium stand mixer accessory that serves as a versatile tool for both professional and home bakers alike. Designed to enhance the performance of the KitchenAid stand mixers, this attachment embodies the brand’s commitment to quality, durability, and functionality.

One of the main features of the W10635370A is its high-quality construction. Made from durable materials, it offers longevity and is resistant to wear and tear, ensuring it withstands the rigors of frequent use. The stainless-steel design not only provides a sleek, modern aesthetic but also guarantees easy cleaning and maintenance. Simply place it in the dishwasher for hassle-free sanitization.

This attachment is crafted to boost the mixing capabilities of KitchenAid stand mixers by providing a reliable and efficient mixing experience. The powerful motor compatibility ensures that it can handle a variety of ingredients, from dense doughs to delicate batters. The design allows for thorough mixing without leaving lumps, which is crucial for achieving the perfect texture in baked goods.

Another notable technology integrated into the KitchenAid W10635370A is its reliable locking mechanism. This feature ensures that the attachment stays securely in place during operation, allowing for a stable and consistent mixing performance. Furthermore, users will appreciate the ease with which the attachment can be mounted and dismounted, making switching between different tasks a breeze.

The W10635370A also excels in its versatility. It is compatible with a range of KitchenAid stand mixer models, which makes it an excellent investment for those who already own or plan to purchase a KitchenAid mixer. From kneading dough to whipping cream, this attachment helps streamline the cooking process, saving both time and effort.

In conclusion, the KitchenAid W10635370A is an essential kitchen accessory for those who value efficiency and quality in their cooking. Its robust construction, user-friendly design, and versatility make it an ideal choice for anyone looking to elevate their baking and cooking experience. Whether you are a seasoned chef or a novice home cook, this attachment is sure to meet your culinary needs and help you create delightful dishes with ease.
Top Page Image Contents