KitchenAid W10635370A Connect the Water Supply, Water Pressure, Reverse Osmosis Water Supply

Page 5

Water Pressure

A cold water supply with water pressure of between 35 and 120 psi (241 and 827 kPa) is required to operate the water dispenser and ice maker. If you have questions about your water pressure, call a licensed, qualified plumber.

Reverse Osmosis Water Supply

IMPORTANT: The pressure of the water supply coming out of a reverse osmosis system going to the water inlet valve of the refrigerator needs to be between 35 and 120 psi (241 and

827 kPa).

If a reverse osmosis water filtration system is connected to your cold water supply, the water pressure to the reverse osmosis system needs to be a minimum of 40 to 60 psi (276 to 414 kPa).

If the water pressure to the reverse osmosis system is less than

40 to 60 psi (276 to 414 kPa):

■Check to see whether the sediment filter in the reverse osmosis system is blocked. Replace the filter if necessary.

■Allow the storage tank on the reverse osmosis system to refill after heavy usage.

■If your refrigerator has a water filter, it may further reduce the water pressure when used in conjunction with a reverse osmosis system. Remove the water filter. See “Water Filtration System.”

If you have questions about your water pressure, call a licensed, qualified plumber.

Connect the Water Supply

Read all directions before you begin.

IMPORTANT:

■Plumbing shall be installed in accordance with the International Plumbing Code and any local codes and ordinances.

■The gray water tubing on the back of the refrigerator (which is used to connect to the household water line) is a PEX (cross-linked polyethylene) tube. Copper and PEX tubing connections from the household water line to the refrigerator are acceptable, and will help avoid off-taste or odor in your ice or water. Check for leaks.

If PEX tubing is used instead of copper, we recommend the following Whirlpool Part Numbers:

W10505928RP (7 ft [2.14 m] jacketed PEX), 8212547RP (5 ft [1.52 m] PEX), or W10267701RP (25 ft [7.62 m] PEX).

■Install tubing only in areas where temperatures will remain above freezing.

■If you turn on the refrigerator before the water line is connected, turn off the ice maker to avoid excessive noise or damage to the water valve.

Connect to Water Line

1.Unplug refrigerator or disconnect power.

2.Turn OFF main water supply. Turn ON nearest faucet long enough to clear line of water.

3.Find a ¹⁄₂" to 1¹⁄₄" (12.7 mm to 31.8 mm) vertical cold water pipe near the refrigerator.

IMPORTANT:

■Make sure it is a cold water pipe.

■Horizontal pipe will work, but the following procedure must be followed: Drill on the top side of the pipe, not the bottom. This will help keep water away from the drill. This also keeps normal sediment from collecting in the valve.

4.Determine the length of copper tubing you need. Measure from the connection on the lower right rear of the refrigerator to the water pipe. Add 7 ft (2.1 m) to allow for cleaning. Use ¹⁄₄" (6.35 mm) O.D. (outside diameter) copper tubing. Be sure both ends of copper tubing are cut square.

5.Using a cordless drill, drill a ¹⁄₄" hole in the cold water pipe you have selected.

A

B

 

C

 

D

 

E

 

F

 

G

A. Cold water pipe

E. Compression sleeve

B. Pipe clamp

F. Shutoff valve

C. Copper tubing

G. Packing nut

D. Compression nut

 

6.Fasten the shutoff valve to the cold water pipe with the pipe clamp. Be sure the outlet end is solidly in the ¹⁄₄" drilled hole in the water pipe and that the washer is under the pipe clamp. Tighten the packing nut. Tighten the pipe clamp screws slowly and evenly so the washer makes a watertight seal. Do not overtighten.

7.Slip the compression sleeve and compression nut on the copper tubing as shown. Insert the end of the tubing into the outlet end squarely as far as it will go. Screw compression nut onto outlet end with adjustable wrench. Do not overtighten or you may crush the copper tubing.

8.Place the free end of the tubing in a container or sink, and turn ON the main water supply. Flush the tubing until water is clear. Turn OFF the shutoff valve on the water pipe.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Refrigerator User Instructions Your safety and the safety of others are very important Refrigerator SafetyClean Before Using Installation InstructionsUnpack the Refrigerator Before You Throw Away Your Old Refrigerator or FreezerElectrical Requirements Location RequirementsWater Supply Requirements Recommended Grounding MethodWater Pressure Connect the Water SupplyReverse Osmosis Water Supply Connect to Water LineStyle Complete the InstallationConnect to Refrigerator Refrigerator Doors and Drawer Door Removal and Replacement Opening and Closing Doors Refrigerator USEDoor Closing and Door Alignment Using the Controls Ice Maker Crisper Humidity ControlWater Filtration System Water DispenserTo Clean Your Refrigerator CleaningRefrigerator Care Changing the Light BulbMoving Vacation and Moving CareIf You Choose to Turn Off the Refrigerator Before You Leave Refrigerator Operation TroubleshootingIce and Water Temperature and MoistureWater Filter Certifications AccessoriesWater is leaking from the dispenser system Water from the dispenser is warmApplication Guidelines/Water Supply Parameters Performance Data SheetsModel UKF8001AXX-200 Capacity 200 Gallons 757 Liters This limited warranty does not cover Kitchenaid Refrigerator WarrantyPage Sécurité DU Réfrigérateur Instructions Dutilisation DU RéfrigérateurDéballage du réfrigérateur Instructions D’INSTALLATIONAvant de jeter votre vieux réfrigérateur ou congélateur Dépose des matériaux d’emballageMéthode recommandée de mise à la terre Exigences demplacementSpécifications électriques Nettoyage avant l’utilisationRaccordement de la canalisation deau Spécifications de l’alimentation en eauPression de leau Alimentation en eau par osmose inverseRaccordement au réfrigérateur Achever l’installationPortes et tiroir du réfrigérateur Dépose et réinstallation des portes Ouverture et fermeture des portes Utilisation DU RéfrigérateurFermeture et alignement de la porte Utilisation des commandes Machine à glaçons Réglage de lhumidité dans Le bac à légumesSystème de filtration de leau Distributeur d’eauEntretien DU Réfrigérateur Remplacement de l’ampoule d’éclairageNettoyage Entretien avant les vacances ou Lors d’un déménagementFonctionnement du réfrigérateur DépannageDéménagement Le réfrigérateur ne fonctionne pasGlaçons et eau Température et humiditéAccessoires Système de filtration d’eau intérieur Feuilles DE Données SUR LA PerformanceModèle UKF8001AXX-200 /Capacité 200 gallons 757 litres Garantie Limitée Garantie DU Réfrigérateur Kitchenaid11/13 W10635370A SP PN W10635371A

W10635370A specifications

The KitchenAid W10635370A is a premium stand mixer accessory that serves as a versatile tool for both professional and home bakers alike. Designed to enhance the performance of the KitchenAid stand mixers, this attachment embodies the brand’s commitment to quality, durability, and functionality.

One of the main features of the W10635370A is its high-quality construction. Made from durable materials, it offers longevity and is resistant to wear and tear, ensuring it withstands the rigors of frequent use. The stainless-steel design not only provides a sleek, modern aesthetic but also guarantees easy cleaning and maintenance. Simply place it in the dishwasher for hassle-free sanitization.

This attachment is crafted to boost the mixing capabilities of KitchenAid stand mixers by providing a reliable and efficient mixing experience. The powerful motor compatibility ensures that it can handle a variety of ingredients, from dense doughs to delicate batters. The design allows for thorough mixing without leaving lumps, which is crucial for achieving the perfect texture in baked goods.

Another notable technology integrated into the KitchenAid W10635370A is its reliable locking mechanism. This feature ensures that the attachment stays securely in place during operation, allowing for a stable and consistent mixing performance. Furthermore, users will appreciate the ease with which the attachment can be mounted and dismounted, making switching between different tasks a breeze.

The W10635370A also excels in its versatility. It is compatible with a range of KitchenAid stand mixer models, which makes it an excellent investment for those who already own or plan to purchase a KitchenAid mixer. From kneading dough to whipping cream, this attachment helps streamline the cooking process, saving both time and effort.

In conclusion, the KitchenAid W10635370A is an essential kitchen accessory for those who value efficiency and quality in their cooking. Its robust construction, user-friendly design, and versatility make it an ideal choice for anyone looking to elevate their baking and cooking experience. Whether you are a seasoned chef or a novice home cook, this attachment is sure to meet your culinary needs and help you create delightful dishes with ease.
Top Page Image Contents