KitchenAid W10199299A / 8336411962720 manual Refrigerator Care, Cleaning, ChangingtheLightBulb

REFRIGERATOR CARE

Cleaning

WARNING

Explosion Hazard

Use nonflammable cleaner.

ChangingtheLightBulb

NOTE: Not all appliance bulbs will fit your refrigerator. Be sure to replace the bulb with one of the same size, shape, and wattage.

To change the light bulb:

1.Unplug refrigerator or disconnect power.

2.Using a Phillips screwdriver, remove the screw located at the back of the light shield. Pull the light shield back to remove the tabs from the appliance. Remove the light shield.

Failure to do so can result in death, explosion, or fire.

Clean the refrigerator about once a month to avoid buildup of odors. Wipe up spills immediately.

To clean your refrigerator:

A

B

C

1.Unplug refrigerator or disconnect power.

2.Remove all removable parts from inside, such as shelves, etc.

3.Hand wash, rinse, and dry removable parts and interior surfaces thoroughly. Use a clean sponge or soft cloth and a mild detergent in warm water.

■Do not use abrasive or harsh cleaners such as window sprays, scouring cleansers, flammable fluids, cleaning waxes, concentrated detergents, bleaches or cleansers containing petroleum products on plastic parts, interior and door liners or gaskets. Do not use paper towels, scouring pads, or other harsh cleaning tools. These can scratch or damage materials.

■To help remove odors, you can wash interior walls with a mixture of warm water and baking soda (2 tbs to 1 qt [26 g to 0.95 L] of water).

4.Wash stainless steel and painted metal exteriors with a clean sponge or soft cloth and a mild detergent in warm water. Do not use abrasive or harsh cleaners, or cleaners containing chlorine. These can scratch or damage materials. Dry thoroughly with a soft cloth.

NOTE: To keep your stainless steel refrigerator looking like new and to remove minor scuffs or marks, it is suggested that you use the manufacturer’s approved Stainless Steel Cleaner and Polish. To order the cleaner, see “Accessories.”

IMPORTANT: This cleaner is for stainless steel parts only!

Do not allow the Stainless Steel Cleaner and Polish to come into contact with any plastic parts such as the trim pieces, dispenser covers or door gaskets. If unintentional contact does occur, clean plastic part with a sponge and mild detergent in warm water. Dry thoroughly with a soft cloth.

5.Replace the removable parts.

6.Clean the condenser coils regularly. They are located behind the base grille. Coils may need to be cleaned as often as every other month. This may help save energy.

■Remove the base grille. See “Base Grille.”

■Use a vacuum cleaner with an extended attachment to clean the condenser coils when they are dusty or dirty.

■Replace the base grille.

7.Plug in refrigerator or reconnect power.

A. Light shield

B.Tabs

C.Screw

3.Replace the bulb.

4.Reinstall the light shield by inserting the tabs. Align the holes and insert the screw. Tighten the screw.

5.Plug in refrigerator or reconnect power.

Vacation andMovingCare

Vacations

If you choose to leave the refrigerator on while you’re away, use up any perishables and freeze other items.

If you choose to turn the refrigerator off before you leave, follow these steps.

1.Remove all food from the refrigerator.

2.Unplug the refrigerator.

3.Clean the refrigerator. See “Cleaning.”

4.Tape a rubber or wood block to the top of the door to prop it open far enough for air to get in. This stops odor and mold from building up.

Moving

When you are moving your refrigerator to a new home, follow these steps to prepare it for the move.

1.Remove all food from the refrigerator.

2.Unplug the refrigerator.

3.Clean, wipe, and dry it thoroughly.

4.Take out all removable parts, wrap them well, and tape them together so they don’t shift and rattle during the move.

5.Tape the doors shut and tape the power cord to the back of the refrigerator.

When you get to your new home, put everything back and refer to the “Installation Instructions” section for preparation instructions.

7