KitchenAid KBFS20ETBL Location Requirements, Electrical Requirements, Water Supply Requirements

Page 3

Location Requirements

WARNING

Explosion Hazard

Keep flammable materials and vapors, such as gasoline, away from refrigerator.

Failure to do so can result in death, explosion, or fire.

To ensure proper ventilation for your refrigerator, allow for a ¹⁄₂" (1.25 cm) space at the top and behind the refrigerator. If your refrigerator has an ice maker, allow extra space at the back for the water line connections. When installing your refrigerator next to a fixed wall, leave 2¹⁄₂" (6.3 cm) minimum on the hinge side (some models require more) to allow for the door to swing open.

NOTE: It is recommended that you do not install the refrigerator near an oven, radiator, or other heat source. Do not install the refrigerator in a location where the temperature will fall below 55°F (13°C).

¹⁄₂" (1.25 cm)

2¹⁄₂" (6.3 cm)

Electrical Requirements

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

Before you move your refrigerator into its final location, it is important to make sure you have the proper electrical connection.

Recommended Grounding Method

A 115 Volt, 60 Hz., AC only 15- or 20-amp fused, grounded electrical supply is required. It is recommended that a separate circuit serving only your refrigerator be provided. Use an outlet that cannot be turned off by a switch. Do not use an extension cord.

NOTE: Before performing any type of installation, cleaning, or removing a light bulb, turn the control (Thermostat, Refrigerator or Freezer Control depending on the model) OFF and then disconnect the refrigerator from the electrical source. When you are finished, reconnect the refrigerator to the electrical source and reset the control (Thermostat, Refrigerator or Freezer Control depending on the model) to the desired setting.

Water Supply Requirements

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.

TOOLS NEEDED:

■

Flat-blade screwdriver

■

¹⁄₄" Nut driver

■

⁷⁄₁₆" and ¹⁄₂" Open-end or two

■

¹⁄₄" Drill bit

 

adjustable wrenches

■

Cordless drill

 

 

IMPORTANT:

■All installations must meet local plumbing code requirements.

■Do not use a piercing-type or ³⁄₁₆" (4.76 mm) saddle valve which reduces water flow and clogs more easily.

■Use copper tubing and check for leaks. Install copper tubing only in areas where the household temperatures will remain above freezing.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Refrigerator User Instructions Refrigerator SafetyBefore You Throw Away Your Old Refrigerator or Freezer Installation InstructionsClean Before Using Unpack the RefrigeratorRecommended Grounding Method Location RequirementsElectrical Requirements Water Supply RequirementsConnect the Water Supply Complete the Installation Refrigerator Doors and Drawer Door Removal & Replacement Refrigerator USE Adjust the DoorUsing the Controls Temperature ControlsOptimIce Feature Adjusting ControlsTo Adjust Set Point Temperatures Additional Control Center Features Max CoolCrisper Humidity Control Ice MakerWater Dispenser Cleaning Refrigerator CareWater Filtration System Troubleshooting Changing the Light BulbRefrigerator Operation Ice and Water Temperature and MoistureWater from the dispenser is warm Water Filter CertificationsWater dispenser will not operate properly Water is leaking from the dispenser systemApplication Guidelines/Water Supply Parameters Product Data SheetsDisclaimer of Implied Warranties Limitation of Remedies Kitchenaid Refrigerator WarrantyONE Year Limited Warranty Items Kitchenaid will not PAY forPage Sécurité DU Réfrigérateur Instructions Dutilisation DU RéfrigérateurEnlèvement des matériaux d’emballage Instructions D’INSTALLATIONDéballage du réfrigérateur Avant de jeter votre vieux réfrigérateur ou congélateurSpécifications de l’alimentation en eau Exigences demplacementMéthode recommandée de mise à la terre Spécifications électriquesRaccordement à une canalisation d’eau Raccordement de la canalisation deauPression de leau Alimentation en eau par osmose inverseAchever l’installation Enlèvement et réinstallation des poignéesPortes et tiroir du réfrigérateur Tiroir de congélation Remplacement de les portes et des charnièresRéinstallation de la façade du tiroir Enlèvement de la porte et des charnièresDémontage et réinstallation de la porte Style 1-Nivellement avant et arrière Utilisation DU RéfrigérateurAjustement de la porte Ouverture et fermeture des portesUtilisation des commandes Alarme AL Holiday Mode mode vacancesDoor Alarm avertisseur de la porte Temp Alarm alarme de dépassement de températureRéglage de lhumidité dans le bac à légumes Machine à glaçonsDistributeur d’eau Entretien DU Réfrigérateur Système de filtration de leauNettoyage Remplacement de l’ampoule d’éclairage Remplacement de lampoule du compartiment de réfrigérationRemplacement de lampoule du compartiment de congélation Fonctionnement du réfrigérateur DépannageGlaçons et eau Température et humiditéLeau du distributeur est tiède Goût, odeur ou couleur grise des glaçonsLe distributeur deau ne fonctionne pas correctement ’eau coule du système de distributionSystème de filtration d’eau intérieur Feuilles DE Données SUR LE ProduitGarantie DU Réfrigérateur Kitchenaid Garantie Limitée DE UN ANKitchenaid NE Prendra PAS EN Charge All rights reserved W10137643A SP PN W10137644A

KBFS20ETBL specifications

The KitchenAid KBFS20ETBL is a refrigerator that combines sleek design with advanced technology to create a practical and stylish addition to any kitchen. One of its standout features is the French door configuration, which not only enhances its aesthetic appeal but also optimizes storage space. The refrigerator’s split shelves and organized compartments make it easier to access all your favorite foods and beverages.

At the heart of the KBFS20ETBL is a powerful and efficient cooling system that is designed to maintain optimum temperatures throughout the fridge and freezer compartments. The Fresh Storage technology ensures your fruits and vegetables stay fresher for longer, significantly reducing waste. With humidity-controlled crispers, you can store produce without worrying about moisture loss or spoilage.

Another major feature is the ExtendFetch drawer, which allows users to slide out the drawer fully, making access to items at the back easier than ever. This feature reduces the need to reach or bend, improving convenience and accessibility. Additionally, the refrigerator includes an ice and water dispenser located on the external door, providing chilled water and ice without the need to open the fridge, which helps maintain internal temperatures.

The KBFS20ETBL is also fitted with the In-Door-Ice System, which maximizes space in the freezer section by freeing up shelf space while still providing a generous supply of ice. This innovative technology allows for more room to store frozen goods without sacrificing ice production.

Energy efficiency is another hallmark of the KitchenAid KBFS20ETBL, as it meets stringent ENERGY STAR guidelines. Users can feel good knowing that they are not only benefiting from exceptional performance but are also reducing their carbon footprint.

The elegant black finish adds a contemporary touch, while the stainless steel handles offer durability and style. Inside, LED lighting illuminates every corner of the fridge, making it easy to find what you need, even in low light.

In summary, the KitchenAid KBFS20ETBL stands out with its combination of smart design, advanced food preservation technologies, and energy efficiency, making it a highly functional and stylish choice for modern kitchens. Whether you’re storing leftovers, perishable groceries, or beverages, this refrigerator meets the demands of today’s households with ease and sophistication.
Top Page Image Contents