KitchenAid KBFS20ETBL Water Filter Certifications, Water dispenser will not operate properly

Page 14

The water dispenser will not operate properly

■Refrigerator connected to a water supply and the supply shutoff valve turned on? Connect refrigerator to water supply and turn water shutoff valve fully open.

■Kink in the water source line? Straighten the water source line.

■New installation? Flush and fill the water system. See “Water Dispenser.”

■Is the water pressure at least 35 psi (241 kPa)? The water pressure to the home determines the flow from the dispenser. See “Water Supply Requirements.”

■Water filter installed on the refrigerator? Remove filter and operate dispenser. If water flow increases, the filter may be clogged or incorrectly installed. Replace filter or reinstall it correctly.

■Refrigerator door closed completely? Close the door firmly. If it does not close completely, see “The doors will not close completely.”

■Recently removed the doors? Make sure the water dispenser wire/tube assembly has been properly reconnected at the bottom of the refrigerator door. See “Refrigerator Doors.”

■Reverse osmosis water filtration system connected to your cold water supply? This can decrease water pressure. See “Water Supply Requirements.”

Water is leaking from the dispenser system

NOTE: One or two drops of water after dispensing is normal.

■Glass not being held under the dispenser long enough? Hold the glass under the dispenser 2 to 3 seconds after releasing the dispenser lever.

■New installation? Flush the water system. See “Water Dispenser.”

■Recently changed water filter? Flush the water system. See “Water Dispenser.”

■Water on the floor near the base grille? Make sure the water dispenser tube connections are fully tightened. See “Refrigerator Doors.”

Water from the dispenser is warm

NOTE: Water from the dispenser is only chilled to 50°F (10°C).

■New installation? Allow 24 hours after installation for the water supply to cool completely.

■Recently dispensed large amount of water? Allow 24 hours for water supply to cool completely.

■Water not been recently dispensed? The first glass of water may not be cool. Discard the first glass of water.

■Refrigerator connected to a cold water pipe? Make sure the refrigerator is connected to a cold water pipe. See “Water Supply Requirements.”

WATER FILTER

CERTIFICATIONS

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Refrigerator Safety Refrigerator User InstructionsUnpack the Refrigerator Installation InstructionsClean Before Using Before You Throw Away Your Old Refrigerator or FreezerWater Supply Requirements Location RequirementsElectrical Requirements Recommended Grounding MethodConnect the Water Supply Complete the Installation Refrigerator Doors and Drawer Door Removal & Replacement Temperature Controls Adjust the DoorUsing the Controls Refrigerator USEAdditional Control Center Features Max Cool Adjusting ControlsTo Adjust Set Point Temperatures OptimIce FeatureWater Dispenser Crisper Humidity ControlIce Maker Water Filtration System CleaningRefrigerator Care Refrigerator Operation TroubleshootingChanging the Light Bulb Temperature and Moisture Ice and WaterWater is leaking from the dispenser system Water Filter CertificationsWater dispenser will not operate properly Water from the dispenser is warmProduct Data Sheets Application Guidelines/Water Supply ParametersItems Kitchenaid will not PAY for Kitchenaid Refrigerator WarrantyONE Year Limited Warranty Disclaimer of Implied Warranties Limitation of RemediesPage Instructions Dutilisation DU Réfrigérateur Sécurité DU RéfrigérateurAvant de jeter votre vieux réfrigérateur ou congélateur Instructions D’INSTALLATIONDéballage du réfrigérateur Enlèvement des matériaux d’emballageSpécifications électriques Exigences demplacementMéthode recommandée de mise à la terre Spécifications de l’alimentation en eauAlimentation en eau par osmose inverse Raccordement de la canalisation deauPression de leau Raccordement à une canalisation d’eauPortes et tiroir du réfrigérateur Achever l’installationEnlèvement et réinstallation des poignées Enlèvement de la porte et des charnières Remplacement de les portes et des charnièresRéinstallation de la façade du tiroir Tiroir de congélationDémontage et réinstallation de la porte Ouverture et fermeture des portes Utilisation DU RéfrigérateurAjustement de la porte Style 1-Nivellement avant et arrièreUtilisation des commandes Temp Alarm alarme de dépassement de température Holiday Mode mode vacancesDoor Alarm avertisseur de la porte Alarme ALDistributeur d’eau Réglage de lhumidité dans le bac à légumesMachine à glaçons Nettoyage Entretien DU RéfrigérateurSystème de filtration de leau Remplacement de lampoule du compartiment de congélation Remplacement de l’ampoule d’éclairageRemplacement de lampoule du compartiment de réfrigération Dépannage Fonctionnement du réfrigérateurTempérature et humidité Glaçons et eau’eau coule du système de distribution Goût, odeur ou couleur grise des glaçonsLe distributeur deau ne fonctionne pas correctement Leau du distributeur est tièdeFeuilles DE Données SUR LE Produit Système de filtration d’eau intérieurKitchenaid NE Prendra PAS EN Charge Garantie DU Réfrigérateur KitchenaidGarantie Limitée DE UN AN W10137643A SP PN W10137644A All rights reserved

KBFS20ETBL specifications

The KitchenAid KBFS20ETBL is a refrigerator that combines sleek design with advanced technology to create a practical and stylish addition to any kitchen. One of its standout features is the French door configuration, which not only enhances its aesthetic appeal but also optimizes storage space. The refrigerator’s split shelves and organized compartments make it easier to access all your favorite foods and beverages.

At the heart of the KBFS20ETBL is a powerful and efficient cooling system that is designed to maintain optimum temperatures throughout the fridge and freezer compartments. The Fresh Storage technology ensures your fruits and vegetables stay fresher for longer, significantly reducing waste. With humidity-controlled crispers, you can store produce without worrying about moisture loss or spoilage.

Another major feature is the ExtendFetch drawer, which allows users to slide out the drawer fully, making access to items at the back easier than ever. This feature reduces the need to reach or bend, improving convenience and accessibility. Additionally, the refrigerator includes an ice and water dispenser located on the external door, providing chilled water and ice without the need to open the fridge, which helps maintain internal temperatures.

The KBFS20ETBL is also fitted with the In-Door-Ice System, which maximizes space in the freezer section by freeing up shelf space while still providing a generous supply of ice. This innovative technology allows for more room to store frozen goods without sacrificing ice production.

Energy efficiency is another hallmark of the KitchenAid KBFS20ETBL, as it meets stringent ENERGY STAR guidelines. Users can feel good knowing that they are not only benefiting from exceptional performance but are also reducing their carbon footprint.

The elegant black finish adds a contemporary touch, while the stainless steel handles offer durability and style. Inside, LED lighting illuminates every corner of the fridge, making it easy to find what you need, even in low light.

In summary, the KitchenAid KBFS20ETBL stands out with its combination of smart design, advanced food preservation technologies, and energy efficiency, making it a highly functional and stylish choice for modern kitchens. Whether you’re storing leftovers, perishable groceries, or beverages, this refrigerator meets the demands of today’s households with ease and sophistication.
Top Page Image Contents