KitchenAid KDDC24RVS manual Water Supply Requirements, Product Dimensions

Page 6

IMPORTANT: If this product is connected to a GFCI (Ground Fault Circuit Interrupter) equipped outlet, nuisance tripping of the power supply may occur, resulting in loss of cooling. Food quality and flavor may be affected. If nuisance tripping has occurred, and if the condition of the food appears poor, dispose of it.

Water Supply Requirements

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.

IMPORTANT:

If you turn the refrigerator on before the water line is connected, turn the ice maker OFF.

All installations must meet local plumbing code requirements.

Use copper tubing and check for leaks. Install copper tubing only in areas where the household temperatures will remain above freezing.

TOOLS NEEDED: Flat-blade screwdriver, ⁷⁄₁₆" and ¹⁄₂" open-end wrenches or two adjustable wrenches, ¹⁄₄" nut driver and drill bit, cordless drill.

NOTE: Your refrigerator dealer has a kit available with a ¹⁄₄"

(6.35 mm) saddle-type shutoff valve, a union, and copper tubing. Before purchasing, make sure a saddle-type valve complies with your local plumbing codes. Do not use a piercing-type or ³⁄₁₆"

(4.76 mm) saddle valve which reduces water flow and clogs more easily.

Water Pressure

A cold water supply with water pressure of between 30 and

120 psi (207 and 827 kPa) is required to operate ice maker. If you have questions about your water pressure, call a licensed, qualified plumber.

Reverse Osmosis Water Supply

IMPORTANT: The pressure of the water supply coming out of a reverse osmosis system going to the water inlet valve of the refrigerator needs to be between 30 and 120 psi

Style 1: Architect® Series

³⁄₈"

(1.0 cm)

Style 2: Overlay

³⁄₈"

(1.0 cm)

14⁷⁄₈"

(37.8 cm)

34¹⁄₈"

(86.7 cm)

14⁷⁄₈"

(37.8 cm)

14⁷⁄₈"

(37.8 cm)

34¹⁄₈"

(86.7 cm)

14⁷⁄₈"

(37.8 cm)

(207 and 827 kPa).

If a reverse osmosis water filtration system is connected to your cold water supply, the water pressure to the reverse osmosis system needs to be a minimum of 40 to 60 psi (276 to 414 kPa).

If the water pressure to the reverse osmosis system is less than

40 to 60 psi (276 to 414 kPa):

Check to see whether the sediment filter in the reverse osmosis system is blocked. Replace the filter if necessary.

Allow the storage tank on the reverse osmosis system to refill after heavy usage.

If you have questions about your water pressure, call a licensed, qualified plumber.

Product Dimensions

Styles 1 and 2: Architect® Series and Overlay

Height dimensions are shown with the leveling legs extended to ¹⁄₄" (6.35 mm) below the refrigerator drawers.

When leveling legs are fully extended to 1" (25 mm) below the refrigerator drawers, add ³⁄₄" (19.05 mm) to the height dimensions.

The power cord is 60" (152.4 cm) long

Drawer Opening Dimensions

Dimensions vary based on model, as shown.

Style 1: Architect® Series

20⁷⁄₈"

 

(53.0 cm)

 

18⁹⁄₁₆"

22¹⁄₂"

(47.2 cm)

(57.2 cm)

6

Image 6
Contents Installation Instruction and Use & Care Guide Table of Contents ÍndiceTable DES Matières Refrigerator Drawers Safety Before You Throw Away Your Old Refrigerated ApplianceDouble Refrigerator Drawers Design Specifications24Drawer Models Double Freezer Drawers with ice maker and water filterLocation Requirements Installation RequirementsTools and Parts Electrical RequirementsProduct Dimensions Water Supply RequirementsInstallation Instructions Style 2 Custom Overlay Drawer PanelsUnpack the Refrigerator Drawers Move the Refrigerator Drawers to Final Location Clean Before UsingConnect Water Supply Connect to Water LineInstall Custom Overlay Panel Level the Refrigerator DrawersAttach the Overlay Panel Before USE Complete InstallationRefrigerator Drawers USE Water Filtration SystemUsing the Controls Ensuring Proper Air CirculationIce Maker and Water Filtration System To clean your refrigerator drawers CleaningWater Filter Indicator / Reset Filter Refrigerator Drawers CareVacation Care TroubleshootingPower Interruptions Motor seems to run too muchAssistance or Service U.S.ABase Grille Water Filter Replacement filter AccessoriesStainless Steel Cleaner & Polish Water Filter CertificationsProduct Data Sheets Application Guidelines/Water Supply ParametersKitchenaid Refrigerator Warranty Limited WarrantySeguridad DE LOS Cajones Refrigerados Antes de descartar su aparato refrigerado viejoEspecificaciones DE Diseño Modelos de cajón deCajón refrigerado doble Requisitos de ubicación Requisitos DE InstalaciónPiezas y herramientas Requisitos eléctricosMedidas del producto Requisitos del suministro de aguaEstilo 2 Paneles de los cajones Recubiertos a la medida Medidas de abertura de los cajonesMedidas de anchura de los cajones Estilo 1 Serie Architect Instrucciones DE Instalación Cómo desempacar los cajones refrigeradosConexión del suministro de agua Mueva los cajones refrigerados a su Posición final Nivelación de los cajones refrigeradosCómo fijar el panel recubierto Sistema de filtración de aguaComplete la instalación Luz de estado del filtro de agua en algunos modelosSonidos normales Antes DEL USOUSO DE LOS Cajones Refrigerados Cómo asegurar la debida circulación de aireUso de los controles Fábrica de hielo y sistema de filtración de Agua Cuidadodeloscajones Refrigerados LimpiezaCuidado durante las vacaciones Solución DE ProblemasCortes de corriente Parece que el motor funciona excesivamenteLa temperatura está demasiado caliente Los cajones refrigerados parecen hacer mucho ruidoEl divisor entre los dos compartimientos está caliente Hay acumulación de humedad en el interiorEn los EE.UU Ayuda O Servicio TécnicoEn Canadá AccesoriosHoja DE Datos DEL Producto Pautas de aplicación/Parámetros para el suministro de aguaGarantía DEL Refrigerador DE Kitchenaid Garantía LimitadaSécurité DES Tiroirs Réfrigérés Avant de jeter votre vieil appareil réfrigéréSpécifications DE Design Modèles de tiroirs deDouble tiroir de réfrigération Dimensions de louverture pour les deux styles Exigences D’INSTALLATIONExigences d’emplacement Outillage et piècesDimensions du produit Spécifications de l’alimentation en eauStyle 2 Panneaux décoratifs de tiroirs Personnalisés Dimensions avec tiroir ouvertDimensions de largeur de tiroir Style 1 Série Architect Style Série ArchitectInstructions D’INSTALLATION Déballage des tiroirs réfrigérésRaccordement de lalimentation en eau Déplacement des tiroirs réfrigérés à leur Emplacement final Réglage de laplomb des tiroirs réfrigérésSystème de filtration de leau Installation du panneau décoratif PersonnaliséAchever linstallation Fixation du panneau décoratifPour assurer une circulation dair correcte Avant LutilisationUtilisation DES Tiroirs Réfrigérés Sons normauxUtilisation des commandes Machine à glaçons et système de filtration Deau Holiday Mode mode vacancesVerrouillage des commandes Mise en marche/arrêt de la machine à glaçonsNettoyage Remplacement de la cartouche du filtre à eauEntretien DES Tiroirs Réfrigérés Réinitialisation de lindicateur de filtre à eauEntretien avant les vacances DépannagePannes de courant Le moteur semble fonctionner excessivementLa température est trop élevée Les tiroirs réfrigérés semblent faire trop de bruitLa cloison entre les deux compartiments est tiède Il existe une accumulation dhumidité à lintérieurAux États-Unis Assistance OU ServiceAccessoires Au CanadaFeuilles DE Données SUR LE Produit Système de filtration d’eau à la grille de la baseGarantie DU Réfrigérateur Kitchenaid W10130022A

KDDC24RVS specifications

The KitchenAid KDDC24RVS is a top-of-the-line undercounter refrigerator designed to blend seamlessly into your kitchen space while providing exceptional functionality. With its sleek stainless steel finish, this refrigerator not only enhances the visual appeal of your kitchen but also offers durability and ease of maintenance.

One of the standout features of the KDDC24RVS is its spacious interior, which boasts 5.2 cubic feet of storage capacity. This allows you to store a variety of items, from beverages to snacks, ensuring you always have what you need within arm's reach. With adjustable shelves and a door bin, the organization of your items becomes a breeze, making it easy to access what you need when you need it.

The KDDC24RVS is equipped with a temperature management system that ensures your food and beverages are kept at the optimal temperature. With its advanced cooling technology, the refrigerator maintains a consistent temperature throughout, reducing the likelihood of spoilage and ensuring your items stay fresh.

In addition to its cooling capabilities, this model also features a sleek LED lighting system. The bright, energy-efficient lighting illuminates the interior, allowing you to easily locate items, even in low-light conditions. The soft glow adds to the overall elegance of the appliance, making it an attractive addition to your kitchen.

What sets the KitchenAid KDDC24RVS apart is its quiet operation. With a specially designed compressor and insulation, this undercounter refrigerator operates with minimal noise, ensuring that your kitchen remains a peaceful space.

Furthermore, this refrigerator is energy-efficient and designed to comply with ENERGY STAR guidelines, which means it consumes less energy compared to similar models. This not only helps you save on utility bills but also contributes to a more sustainable lifestyle.

The KDDC24RVS model features a solid construction, with a sturdy frame and high-quality materials, making it a reliable choice for long-term use. Overall, the KitchenAid KDDC24RVS is an elegant and functional undercounter refrigerator that meets the needs of modern kitchens, providing essential storage solutions without sacrificing style. Whether you're hosting a gathering or simply enjoying a quiet evening at home, this appliance ensures you always have easy access to your favorite foods and drinks.