Emerson CKD9906 owner manual Operating Instructions, Setting The Time Of Day

OPERATING INSTRUCTIONS

Setting The Time Of Day

•Connect the power cord to your AC outlet. Make sure to use an outlet that is always ‘live’. Do not use an outlet that is controlled by a wall switch.

•When the unit is plugged in for the first time the display will show flashing “12:00”(AM).

PM

ALARM 1

ALARM 2

1.) While the display is flashing, press the HR. button to set the hour. Be sure to observe the PM indicator to set the hour correctly. If the PM indicator is ‘On’ the hour displayed is PM.

2.) Press MIN. button to set the minute correctly.

PM

3.) Press the TIME button once. The time is set. The display remains ‘On’.

ALARM 1

ALARM 2

Note: You may proceed to re-set the time again by pressing the TIME button once during Power-off or CD, FM, AM, Buzzer modes.

Important Notes !!

If you press and hold the TIME button any time, the clock will change to European 24-Hour format, and vice versa.

PM	PM
ALARM 1	ALARM 1

ALARM 2 ALARM 2

9

CKD9906_071905.p65 9

19/7/2005, 14:26