Personal, Hazard, Reinstall Set screws after

D-lIf you wish to change

. the door handle insert, slide insert trim into

handle. See Custom panel and insert dimensions for exact sizes to cut custom inserts. Insert end caps into each end of door handle. Replace refrigerator door handle. (Some end caps are attached with screws.)

top grille is aligned with top trim on cabinet. Use ten screws to tighten top grille frame to refrigerator. Check that the power switch is in the “ON” position. Attach top grille decorative panel assembly to the keyhole bracket on the frame and pull down to secure. If the top grille decorative panel does not fit evenly within frame, the keyhole bracket can be moved side to side by adjusting the bracket screws, or the decorative panel bracket can be moved up or down by adjusting the decorator panel bracket nuts.

1171Open both doors. Use two screws to attach

n bottom arille to cabinet Loosen the four height adjustment screws. Adjust the bottom grille to fill the space from the floor to the bottom of the cabinet. Tighten adjustment screws.

112Repeat Steps 10 and 11 m for the freezer door.

113Remove two nuts from one end of the top panel

Put shelves and bins

set screws ,into the refrigerator and freezer compartments.

Remove protective film from door frame.

Move the ice maker arm

into

the down

position.

refrigerator and

119Set

freezer compartment controls to the

midpoint between

“COLD” and

Personal

injury

Hazard

“COLDEST”.

Check that the

compressor

is operating

properly.

Reinstall

set screws after

Check that

all

five

interior

lights and

door swing

is set.

one

exterior

light

above dispenser

Failure to

so could

result in

area

are working.

personal

injury.

W frame. Remove end piece. Slide decorative panel into panel frame. Replace end piece using nuts.

Attach the two braces to

the refrigerator cabinet. Attach top grille frame to braces. Check that

Check that doors can open freely. If not, the door stops can be

adjusted. Loosen set screw in top and bottom hinges with Allen wrench. Determine the door swing desired. Hold door in that position and tighten the set screws. The doors have stops at 90°, 115O and 137O positions. If the door stops cannot be adjusted to clear countertops, the countertops may need to be mitered. (Consult your builder to adjust countertops.)

B-lCheck the water

. connections at the bottom of the refrigerator

again for leaking. Any leaking can cause refrigerator and floor damage.

120Use a drinking glass to n press ice dispenser bar.

You should hear the

motor and auger operating. Press the glass against the water dispenser bar. Dispense and discard 2 to 3 quarts of water to remove air from system and rinse tank.

To get the most efficient use from your new built-in refrigerator, read your KitchenAid’ Use and Care Guide. Keep Installation Instructions and Guide close to built-in refrigerator for easy reference.

Page 10

KSRF36DT specifications

The KitchenAid KSRF36DT is a sleek and contemporary refrigerator designed for those who appreciate both style and functionality in their kitchen. With its impressive blend of innovative technology and sophisticated aesthetics, this appliance is sure to elevate any culinary space.

One of the standout features of the KSRF36DT is its spacious interior, which offers an impressive storage capacity of 36 cubic feet. This generous space is perfectly designed to accommodate all your groceries, making it easier to organize and access food items. The refrigerator features adjustable shelves, including glass and spill-proof options, allowing for flexible storage solutions to fit larger items when needed. In addition, the built-in humidity-controlled crisper drawers ensure that fruits and vegetables stay fresh longer by maintaining the ideal moisture levels.

In terms of technology, the KitchenAid KSRF36DT is equipped with the advanced Preserva Food Care System. This innovative system utilizes a dual cooling approach to maintain optimal temperatures and humidity levels in both the refrigerator and freezer sections. By preventing cross-contamination of odors and providing a stable environment for food storage, this system helps preserve the freshness of your perishable items for an extended period.

The exterior of the KSRF36DT is just as impressive as its interior. The stainless steel finish not only adds a modern touch to your kitchen but is also fingerprint-resistant, ensuring a clean and polished appearance at all times. The refrigerator features an integrated dispenser that provides quick access to chilled water and ice, complete with options for crushed or cubed ice, meeting all your hydration needs.

Additionally, the KSRF36DT includes a variety of smart features, including an adaptive defrost control, Energy Star certification for efficiency, and LED lighting that illuminates the interior beautifully while consuming less energy. The unit also comes with a built-in filtration system that ensures clean and great-tasting water and ice.

Overall, the KitchenAid KSRF36DT is an exceptional refrigerator that combines cutting-edge technology with elegant design, making it an ideal choice for modern kitchens. With its ample storage, advanced food preservation technologies, and stylish appearance, it is guaranteed to meet the demands of everyday cooking and entertaining.