KitchenAid KSRS25CNBL Connect Water Supply, Water Pressure, Reverse Osmosis Water Supply

Page 4

Water Pressure

A cold water supply with water pressure of between 30 and 120 psi (207 and 827 kPa) is required to operate the water dispenser and ice maker. If you have questions about your water pressure, call a licensed, qualified plumber.

Reverse Osmosis Water Supply

IMPORTANT: The pressure of the water supply coming out of a reverse osmosis system going to the water inlet valve of the refrigerator needs to be between 30 and 120 psi (207 and

827 kPa).

If a reverse osmosis water filtration system is connected to your cold water supply, the water pressure to the reverse osmosis system needs to be a minimum of 40 to 60 psi (276 to 414 kPa).

If the water pressure to the reverse osmosis system is less than

40 to 60 psi (276 to 414 kPa):

Check to see whether the sediment filter in the reverse osmosis system is blocked. Replace the filter if necessary.

Allow the storage tank on the reverse osmosis system to refill after heavy usage.

If your refrigerator has a water filter, it may further reduce the water pressure when used in conjunction with a reverse osmosis system. Remove the water filter. See “Water Filtration System.”

If you have questions about your water pressure, call a licensed, qualified plumber.

Connect Water Supply

Read all directions before you begin.

IMPORTANT: If you turn the refrigerator on before the water line is connected, turn the ice maker OFF.

Connect to Water Line

1.Unplug refrigerator or disconnect power.

2.Turn OFF main water supply. Turn ON nearest faucet long enough to clear line of water.

3.Locate a ¹⁄₂" (12.70 mm) to 1¹⁄₄" (3.18 cm) vertical cold water pipe near the refrigerator.

IMPORTANT:

Make sure it is a cold water pipe.

Horizontal pipe will work, but drill on the top side of the pipe, not the bottom. This will help keep water away from the drill and normal sediment from collecting in the valve.

4.Determine the length of copper tubing you need. Measure from the connection on the lower rear corner of refrigerator to the water pipe. Add 7 ft (2.1 m) to allow for cleaning. Use ¹⁄₄" (6.35 mm) O.D. (outside diameter) copper tubing. Be sure both ends of copper tubing are cut square.

5.Using a cordless drill, drill a ¹⁄₄" (6.35 mm) hole in the cold water pipe you have selected.

 

A

G

B

 

 

C

F E

D

A. Cold water pipe

E. Compression sleeve

B. Pipe clamp

F. Shutoff valve

C. Copper tubing

G. Packing nut

D. Compression nut

 

6.Fasten the shutoff valve to the cold water pipe with the pipe clamp. Be sure the outlet end is solidly in the ¹⁄₄" (6.35 mm) drilled hole in the water pipe and that the washer is under the pipe clamp. Tighten the packing nut. Tighten the pipe clamp screws slowly and evenly so the washer makes a watertight seal. Do not overtighten or you may crush the copper tubing.

7.Slip the compression sleeve and compression nut on the copper tubing as shown. Insert the end of the tubing into the outlet end squarely as far as it will go. Screw the compression nut onto outlet end with adjustable wrench. Do not overtighten.

8.Place the free end of the tubing in a container or sink, and turn ON the main water supply. Flush the tubing until water is clear. Turn OFF the shutoff valve on the water pipe. Coil the copper tubing.

Connect to Refrigerator

Style 1

1.Unplug refrigerator or disconnect power.

2.Attach the copper tube to the valve inlet using a compression nut and sleeve as shown. Tighten the compression nut. Do not overtighten.

3.Use the tube clamp on the back of the refrigerator to secure the tubing to the refrigerator as shown. This will help avoid damage to the tubing when the refrigerator is pushed back against the wall.

4.Turn shutoff valve ON.

5.Check for leaks. Tighten any connections (including connections at the valve) or nuts that leak.

A

B

C

D

A. Tube clamp

C. Compression nut

B. Copper tubing

D. Valve inlet

6.The ice maker is equipped with a built-in water strainer. If your water conditions require a second water strainer, install it in the ¹⁄₄" (6.35 mm) water line at either tube connection. Obtain a water strainer from your nearest appliance dealer.

Style 2

1.Unplug refrigerator or disconnect power.

2.Remove and discard the black nylon plug from the gray water tube on the rear of the refrigerator.

3.If the gray water tube supplied with the refrigerator is not long enough, a ¹⁄₄" x ¹⁄₄" (6.35 mm x 6.35 mm) coupling is needed in order to connect the water tubing to an existing household water line. Thread the provided nut onto the coupling on the end of the copper tubing.

NOTE: Tighten the nut by hand. Then tighten it with a wrench two more turns. Do not overtighten.

A

B

C

D

E F G

A. Refrigerator water tubing

 

E. Ferrule (purchased)

B. Nut (provided)

 

 

F. Nut (purchased)

C. Bulb

 

 

 

G. Household water line

D. Coupling (purchased)

 

 

4

Image 4
Contents Refrigerator Safety Refrigerator User InstructionsUnpack the Refrigerator Installation InstructionsBefore You Throw Away Your Old Refrigerator or Freezer Location Requirements Electrical RequirementsWater Supply Requirements Recommended Grounding MethodConnect Water Supply Water PressureReverse Osmosis Water Supply Connect to Water LineComplete the Installation Factory Trim KitRemove the Door Panels Replace the Door PanelsCare for Decorator Panels Install Custom Wood Panels25 cu. ft Freezer and Refrigerator Door Using the Controls Refrigerator USEConvertible Drawer Temperature Control Chilled Door Bin Crisper Humidity ControlWater and Ice Dispensers Ice Maker and Storage Bin Dispenser Lock on some modelsRemoving and Replacing Ice Storage Bin Style Turning the Ice Maker On/Off StyleRefrigerator Care CleaningWater Filtration System Changing the Light Bulbs TroubleshootingRefrigerator Operation Temperature and Moisture Ice and WaterWater is leaking from the dispenser Dispenser water is not cool enoughAccessories Stainless Steel Cleaner and PolishWater Filter Certifications Standard Base Filter CartridgeProduct Data Sheets Application Guidelines/Water Supply ParametersKitchenaid Refrigerator Warranty ONE Year Limited WarrantyLifetime Limited Warranty on Door Bins and can Racks Items Kitchenaid will not PAY forInstructions Dutilisation DU Réfrigérateur Sécurité DU RéfrigérateurDéballage du réfrigérateur Instructions DinstallationAvant de jeter votre vieux réfrigérateur ou congélateur Exigences demplacement Méthode recommandée de mise à la terreSpécifications électriques Spécifications de l’alimentation en eauRaccordement de la canalisation deau Pression de leauAlimentation en eau par osmose inverse Raccordement à une canalisation d’eauEnsembles décoratifs d’origine Achever l’installationPorte du congélateur Porte du réfrigérateur Réinstallation des panneaux de porte Installation des panneaux personnalisés en boisEnlèvement des panneaux de la porte Entretien des panneaux décoratifsUtilisation des commandes Commandes à glissière sur certains modèlesImportant toutes les commandes Utilisation DU RéfrigérateurAjustement des commandes à glissière Commandes électroniques sur certains modèlesProduction accélérée de glaçons Condition Ajustement DU RéglageRéglage de lhumidité dans le bac à légumes Commande de température dans le tiroir ConvertibleCompartiment fraîcheur dans la porte Distributeurs d’eau et de glaçons sur certains modèles Pour retirer et réinstaller le bac à glaçons Style Machine à glaçons et bac dentreposageLe verrouillage du distributeur sur certains modèles Mise en marche/arrêt de la machine à glaçons StyleSystème de filtration de leau Entretien DU RéfrigérateurNettoyage Remplacement des ampoules d’éclairage DépannageFonctionnement du réfrigérateur Le réfrigérateur ne fonctionne pasTempérature et humidité Les portes ne ferment pas complètementLes portes sont difficiles à ouvrir La température est trop élevéeGlaçons et eau Les glaçons sont creux ou petitsGoût, odeur ou couleur grise des glaçons Le distributeur de glaçons ne fonctionne pas correctementAccessoires Le distributeur deau ne fonctionne pas correctementDe leau suinte du distributeur Leau du distributeur nest pas assez froideFeuilles DE Données SUR LE Produit Système de filtration d’eau à la grille de la baseGarantie Limitée DE UN AN Garantie DU Réfrigérateur KitchenaidKitchenaid NE Prendra PAS EN Charge Benson Road Benton Harbor, MI Au Canada W10162454A SP PN W10162455A

KSRS25CNBL specifications

The KitchenAid KSRS25CNBL is a standout refrigerator that combines functionality with sleek aesthetics, making it an ideal addition to any modern kitchen. With its spacious design and advanced features, this model offers both practicality and style.

One of the key features of the KitchenAid KSRS25CNBL is its large capacity. With a total storage capacity of 25 cubic feet, it provides ample space for fresh and frozen foods, allowing you to stock up on groceries without the worry of running out of room. The adjustable shelves in the refrigerator section enable you to customize the layout according to your needs, accommodating larger items such as cakes and pizzas with ease.

This refrigerator incorporates the latest in cooling technology with its Whirlpool’s Adaptive Defrost system. This feature allows for efficient energy use by only running the defrost cycle when necessary, which not only saves energy but also keeps the food fresher for a longer period. Additionally, the dual cooling system separates the refrigerator and freezer sections, ensuring that the humidity levels are ideal for fruits and vegetables while preventing freezer burn.

The KSRS25CNBL comes equipped with an external ice and water dispenser, providing quick access to refreshingly cold water and ice without the need to open the door. The dispenser also features a filter indicator, ensuring you always have clean and refreshing water on hand.

In terms of energy efficiency, this model is Energy Star certified, which means it meets strict energy efficiency guidelines. This certification not only helps you save on energy bills but also contributes to a more sustainable home.

Other notable characteristics include bright LED lighting that provides excellent visibility throughout the refrigerator, making it easy to find your favorite snacks or ingredients. The stainless steel exterior not only adds a touch of elegance to your kitchen but is also smudge-resistant, ensuring that your appliance looks pristine.

Overall, the KitchenAid KSRS25CNBL is a perfect blend of advanced technology, generous storage space, and modern design, making it a reliable choice for anyone looking to enhance their kitchen experience. Whether you are a gourmet cook or a busy family, this refrigerator is designed to meet diverse needs while keeping your food fresh and accessible.