GETTING STARTED
Default: XX
1Press and hold MENU.
2Turn the volume knob to select [DEMO], then press the knob.
3Turn the volume knob to select [DEMO OFF], then press the knob.
4 Press MENU to exit.
1 | Press and hold MENU. |
2 | Turn the volume knob to select [CLOCK], then press the knob. |
3 | Turn the volume knob to select [CLOCK SET], then press the knob. |
BEEP
SRCSELECT
AM*
PANDORA*
IHEART*
AUX*
AUTO: The clock time is automatically set using the Clock Time (CT) data in
FM Radio Broadcast Data System signal.; OFF: Cancels.
ON: The clock time is shown on the display even when the unit is turned
off. ; OFF: Cancels.
ON:
..
ON: Enables AM in source selection.; OFF: Disables.
ON: Enables PANDORA in sourc~ selection.; OFF: Disables.
ON: Enables IHEARTRADIO in source selection.; OFF: Disables.
ON: Enables AUXin source selection.; OFF: Disables.; BT ADAPTER: Select when the
4 Turn the volume knob to make the settings, then press the knob. |
Day • Hour • Minute
5Turn the volume knob to select [24H/ 12H], then press the knob.
6Turn the volume knob to select [12 HOUR] or [24 HOUR], then press the knob.
7Press MENU to exit.
1Press and hold MENU. ·
2Turn the volume knob to make a selection (see the following table),
then press the knob. |
|
3 Press MENU to exit. | _ |
To return to the previous setting item or hierarchy, press~ PTY.
F/W.UPOATE
SYSTEM
F/Wxxxx YES: Starts upgrading the firmware.; N.Q: Cancels (upgrading is not activated).
For details on how to update the firmware, see: <http://www.jvc.net/cs/car/>.
*Not displayed when the corresponding source is selected.
4