KitchenAid 2000495 installation instructions Iii

Page 10

3-prong aroundina tvDe

retainer

Move refrigerator close to

15final position. Remove

. cardboard or plywood from under refrigerator. Plug electrical cord inio the grounded outlet. Use the screw from the parts package to install the plug retainer. Move the refrigerator evenly and straight into the opening. Check that the water line will not be kinked. Check that slack in the electrical cord hangs freely behind refrigerator or is placed on top of refrigerator next to cover.

/7 Remove tape from rear

n leveling rods. Turn the two leveling rods clockwise using a 5/l 6” socket and ratchet until the cabinet weight is supported by the rear legs. Use l-3/8” open end wrench to lower the front leveling legs until the weight of the cabinet is supported by legs.

I-1

19 If side panels are not used,

. go to Step 10. Read Side panel requirements, page 6, before attaching side panels to refregerator.

\\ \\

16. Check that the power switch at the top of the

cabinet is in the “OFF” position.

Flush at least 2 qts. of water

 

 

through the copper tubing and

 

 

check for water leaks around the

 

 

saddle valve. (See page 7 for

 

 

complete

Instructions.)

 

-

 

refrigerator

waler

valve

 

I!=

 

 

 

 

 

 

 

- ..

“III

compresslon

nut

sleeve

 

 

 

 

 

Connect tubing assembly fitting to refrigerator water valve. Do Not over-tighten. (if necessary, water valve can be removed from underside of the cabinet to attach the fitting. You may have to remove the wiring channel to get to valve. Remove the screw between coils of water valve. Remove disconnected water valve and attach fitting. Replace the water valve.)

Slide compression nut and sleeve on open end of tubing assembly fitting. Connect the union from water supply line to compression nut and sleeve on the tubing from water valve and tighten. Do Not over-tighten.

Turn water supply valve to the open position. Turn refrigerator switch to the “ON”position. Check all connections for leaks.

Page 10

Open both doors. Place a El level against the underside

n of the door trim at the top of the refrigerator. Adjust the front leveling legs until level and to the right height for the recessed area. Place the level on the crisper guide in the refrigerator section to check for levelness front to back. Turn the right, rear leveling rod until level and to the required height. Place the level on the freezer basket guide to level the left side of the cabinet.

Remove all tape and door bracing from

refrigerator door. Remove the six screws that attach the handle to the door frame. Slide the refrigerator door panel into door frame. If the panel is less than l/4” thick, a filler panel will need to be installed between the door and decorative panel. if the decorative panel is more than l/4” thick, it will have to be routed to have a l/4” edge on all sides. See Custom panel and inset-l dimensions for exact sizes to cut custom panels.

Page 9 Page 11
Image 10
Page 9 Page 11
Contents IttchenAiid Door panel kits Before you startParts that must be ordered separately or custom-made Custom door panels and top grille panelsFront Dimensions for built-in areaTipping Radius ‘Top grille Product dimensionsLevelers extended l/8 below rollers Optional Top GrillesCustom door Panels, handle Inserts and top grille panels Decorative panelsRefrigerator Product dimensions +/- I/W toleranceSide trim Product/Property Damage Recommended grounrling methodUse only 114 copper tubing for water line To do so may result in water damageFailure to follow these instructions could When a soffit is not availableProduct support Injury or property damageNow start Film until refrigerator is completely installedPosition III Set If built-in refrigerator does not operate How to arrange for ServiceIf you need Assistance

2000495 specifications

The KitchenAid 2000495 is a versatile kitchen appliance designed to elevate your culinary experience with its robust performance, innovative technology, and user-friendly features. This stand mixer is particularly favored by both home cooks and professional chefs for its reliability and impressive capabilities.

One of the standout features of the KitchenAid 2000495 is its powerful motor. With a high-performance 325-watt motor, this mixer can handle heavy mixtures with ease, making it ideal for tasks like kneading dough or whipping heavy creams. The motor is designed to deliver consistent power at all speed levels, ensuring that your ingredients are mixed thoroughly every time.

The KitchenAid 2000495 boasts a unique planetary mixing action, which allows the beater to rotate in two directions. While the beater rotates, it moves in a planetary motion around the bowl, covering every inch and ensuring that all ingredients are incorporated evenly. This technology minimizes mixing time and maximizes efficiency, allowing users to achieve perfect results faster.

Another key characteristic of this mixer is its 10-speed slide control, which lets you choose the optimal speed for your specific mixing task. Whether you’re gently folding ingredients or mixing at high speeds, the precise control allows for complete customization of your mixing experience. The speeds range from a slow stir to a fast whip, accommodating a variety of cooking techniques and recipes.

The KitchenAid 2000495 also features a generous 4.5-quart stainless steel mixing bowl that comes with a comfortable handle. This bowl size is suitable for most standard recipes, and the stainless steel material ensures durability, ease of cleaning, and resistance to stains and odors.

Additionally, this mixer offers versatility with its optional attachments. You can expand the mixer’s capabilities by attaching various accessories, such as a pasta maker, food grinder, and vegetable slicer, transforming it into a multifunctional kitchen tool.

User convenience is at the forefront of KitchenAid’s design, reflected in features such as a tilt-head design for easy access to the bowl and a locking mechanism that stabilizes the mixer during operation. The unit is available in multiple colors, allowing you to choose one that complements your kitchen aesthetic.

In summary, the KitchenAid 2000495 is an indispensable kitchen appliance that combines power, functionality, and design. Whether you’re baking bread, preparing sauces, or mixing batters, this stand mixer is built to assist you in achieving culinary excellence with ease and style.
Top Page Image Contents