KitchenAid 2000495 Product support, Failure to follow these instructions could

Page 8

Product support

A solid soffit or a wood block is required to prevent the refrigerator from tipping forward after it is installed.

Determine what height the refrigerator will be when it is installed to fit opening. Determine the height to the top of the cover at the final installed height you plan to use.

block(s)

Block(s) must be long enough to fully cover width of cover.

mImportant: Block(s) must extend at least 2” over cover.

Personal injury/Property Damage Hazard

l

l

l

Unit is top-heavy and may tip forward when the doors are opened.

A solid soffit or 2” wood block is required above the refrigerator to prevent tipping during use.

if solid soffit is more than 1 inch above refrigerator, a wood block must be installed on the wail not more than

l/4 inch above the refrigerator cover.

 

above

cover)

An&tip

soffit-

 

Failure to follow these instructions could

 

 

 

/wood

block(s)

(less

than 1”

resutt in personal

injury or property damage,

 

 

 

 

above

cover)

Your installation location may vary

 

314”

max.

 

 

 

 

 

 

 

from the examples shown. However,

 

 

 

 

 

you must support

the refrigerator

 

<cover

 

 

‘cover

with a wood block or other adequate

 

 

 

 

 

 

 

 

 

means of support located l/4” above the cover.

\‘I

Locate anti-tip wood blocks a maximum of l/4”

rear wall

\

2

rear wall

rear

wall

When a soffit is not available,

locate wail studs in the refrigerator opening. Center one wood block and use wood screws to attach the wood block to the wail studs. Make sure screws engage wail studs a minimum of 1-l/2”. Screw the second wood block to the front of the first block. The wood blocks must extend 2 inches beyond the ends of the cover.

Page 8

if soffit is more than one inch above cover, locate wall studs in the refrigerator opening. Center one wood block and use wood screws to attach the wood block to the wail studs. Make sure screws engage wall studs a minimum of 1-l/2”. Screw the second wood block to the front

of the first block. The wood block(s) must extend 2 inches beyond the ends of the cover.

if soffit is less than one inch above cover, a wood support is not needed.

Page 7 Page 9
Image 8
Page 7 Page 9
Contents IttchenAiid Before you start Parts that must be ordered separately or custom-madeDoor panel kits Custom door panels and top grille panelsTipping Radius Dimensions for built-in areaFront Product dimensions Levelers extended l/8 below rollers‘Top grille Optional Top GrillesCustom door Panels, handle Inserts and top grille panels Decorative panelsSide trim Product dimensions +/- I/W toleranceRefrigerator Recommended grounrling method Use only 114 copper tubing for water lineProduct/Property Damage To do so may result in water damageWhen a soffit is not available Product supportFailure to follow these instructions could Injury or property damagePosition Film until refrigerator is completely installedNow start III Set If you need Assistance How to arrange for ServiceIf built-in refrigerator does not operate

2000495 specifications

The KitchenAid 2000495 is a versatile kitchen appliance designed to elevate your culinary experience with its robust performance, innovative technology, and user-friendly features. This stand mixer is particularly favored by both home cooks and professional chefs for its reliability and impressive capabilities.

One of the standout features of the KitchenAid 2000495 is its powerful motor. With a high-performance 325-watt motor, this mixer can handle heavy mixtures with ease, making it ideal for tasks like kneading dough or whipping heavy creams. The motor is designed to deliver consistent power at all speed levels, ensuring that your ingredients are mixed thoroughly every time.

The KitchenAid 2000495 boasts a unique planetary mixing action, which allows the beater to rotate in two directions. While the beater rotates, it moves in a planetary motion around the bowl, covering every inch and ensuring that all ingredients are incorporated evenly. This technology minimizes mixing time and maximizes efficiency, allowing users to achieve perfect results faster.

Another key characteristic of this mixer is its 10-speed slide control, which lets you choose the optimal speed for your specific mixing task. Whether you’re gently folding ingredients or mixing at high speeds, the precise control allows for complete customization of your mixing experience. The speeds range from a slow stir to a fast whip, accommodating a variety of cooking techniques and recipes.

The KitchenAid 2000495 also features a generous 4.5-quart stainless steel mixing bowl that comes with a comfortable handle. This bowl size is suitable for most standard recipes, and the stainless steel material ensures durability, ease of cleaning, and resistance to stains and odors.

Additionally, this mixer offers versatility with its optional attachments. You can expand the mixer’s capabilities by attaching various accessories, such as a pasta maker, food grinder, and vegetable slicer, transforming it into a multifunctional kitchen tool.

User convenience is at the forefront of KitchenAid’s design, reflected in features such as a tilt-head design for easy access to the bowl and a locking mechanism that stabilizes the mixer during operation. The unit is available in multiple colors, allowing you to choose one that complements your kitchen aesthetic.

In summary, the KitchenAid 2000495 is an indispensable kitchen appliance that combines power, functionality, and design. Whether you’re baking bread, preparing sauces, or mixing batters, this stand mixer is built to assist you in achieving culinary excellence with ease and style.
Top Page Image Contents