Clarion DVH940N Adjusting speaker output level SP-GAIN, Adjusting speaker delay time Delay

Page 9

Setting Acoustic Features

4.Press the [a] or [d] button to select the speaker to adjust.

•FRONT HPF: high pass filter for front speakers

•CENTER HPF: high pass filter for the center speaker

•SRD HPF: high pass filter for the rear (surround) speakers

•SUB-W LPF: low pass filter for the subwoofer

5.Turn the [ROTARY] knob clockwise or counterclockwise to select the frequency.

•In case of [FRONT HPF] and [SRD HPF], the frequency is 50 Hz, 80 Hz, 120 Hz and [THRGH] (no filter).

•In case of [SUB-W LPF], [CENTER HPF] the frequency is 50 Hz, 80 Hz or 120 Hz.

6.Press the [ADJ] button to return to the original mode.

Adjusting speaker output level (SP-GAIN)

Use the built-in test tone function of the unit to adjust the speaker output level to the same level.

•The initial value is [0 dB].

•A speaker that was turned off in the Section “Turning speakers on or off (SP-SEL)” is not displayed.

1.Press and hold the [ADJ] button for 1 second or longer to enter adjust mode.

2.Press the [a] or [d] button to change to the [SP-GAINE] display.

3.Press the [ENT] button to display the adjustment item.

•In the adjustment mode, the test tone is output from the selected speaker.

4.Press the [a] or [d] button to select the speaker to adjust.

•FRONT-L: front left speaker

•CENTER: front center speaker

•FRONT-R: front right speaker

•SURROUND R: right rear (surround) speaker

•SURROUND L: left rear (surround) speaker

•SUB-WOOFER: rear subwoofer

5.Turn the [ROTARY] knob clockwise or counterclockwise to adjust the gain.

•The adjustment range is –10 dB to +10 dB.

6.Press the [ADJ] button to return to the original mode.

Adjusting speaker delay time (DELAY)

The timing when the sound of each speaker reaches the listening position depends on speaker installation and the size of the car. Adjust the delay time of each speaker so that the sound of all speakers reach the listening position at the same time as the sound from the front speakers.

•The initial value is [0 ms].

•A speaker that was turned off in the Section “Turning speakers on or off (SP-SEL)” is not displayed.

1.Press and hold the [ADJ] button for 1 second or longer to enter adjust mode.

2.Press the [a] or [d] button to change to the [DELAY E] display.

3.Press the [ENT] button to display the adjustment item.

4.Press the [a] or [d] button to select the speaker to adjust.

•CTR-SP: center speaker

•SRD-SP: rear (surround) speaker

5.Turn the [ROTARY] knob clockwise or counterclockwise to select the delay time.

•The [CTR-SP] adjustment range is 0 to 5 ms.

•The [SRD-SP] adjustment range is 0 to 15 ms.

6.Press the [ADJ] button to return to the original mode.

English

DVH940 9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents DVH940 Precautions ContentsThin-line chassis can be installed beneath seat FeaturesOnboard DTS/Dolby Digital/Pro Logic II Decoder Dolby Pro LogicList of accessories SpecificationsDigital/Analog Processing Section DSP/EQ sectionConfirm Before Operation CeNET CableOptical Digital Cables sold separately or furnished Digital Inputs When Optical Digital Cable is Connected Speaker SystemDVD Video Setting parametric equalizer P.EQ DSF SettingOperations Operations DXZ745MPSetting speaker filter frequency Filter Setting Acoustic FeaturesTurning speakers on or off SP-SEL Operations DXZ745MPAdjusting speaker output level SP-GAIN Adjusting speaker delay time DelaySetting Acoustic Features Setting the Dolby Digital functions Dolby D Music Mode Fine Adjustments PL IIDynamic range compression function D-RANGE Wiring Techniques Use When Connecting Optional Control Unit DVC920Name of Parts How to Wire This Unit Installation Precautions InstallationInstallation Example for installation beneath seat CaseCase Damage Mm maxSystem Expansion STAND-ALONE / Slave switch to the Slave position1ch surround Decoder Black RCA pin cable DXZ935Case of Difficulty 1ch surround Reset switch DecoderDVH940 Précautions Table des matièresChâssis mince installable sous le siège CaractéristiquesDécodeur DTS / Dolby Digital / Pro Logic II à bord Spécifications Liste des accessoiresSection de traitement Numérique/ Analogique Section DSP/EQCâbles optiques numériques vendus séparément ou inclus Câble CeNETDCA-005 5m DCA-008 1,5mDVD vidéo Système de haut-parleursDémarches DXZ745MP FonctionnementSélection du menu Dolby Pro Logic Réglage DSFActivation / désactivation des haut-parleurs SP-SEL Réglage de la fréquence de filtre des haut-parleurs FilterDémarches DXZ745MP Réglage du retard des haut- parleurs Delay Réglage du niveau de sortie des haut-parleurs SP-GAINRéglage des caractéristiques acoustiques Réglage des fonctions du Dolby Digital Dolby D Réglages précis du modeNom des pièces Méthode DE CâblagePrécaution Câblage de cette unitéExemple d’installation sous le siège Précautions à l’installationExpansion DU Système Fil de hautSubwoofer alimenté Ampli incorporé Câble vidéo RCA jaune Décodeur Surround Canaux Noir Câble à broche RCAVendu séparément EN CAS DE Difficulté Décodeur Surround Touche Reset Canaux32 DVH940 DVH940 Ejemplo de instalación para instalarlo debajo del asiento PrecaucionesChasis plano que puede instalarse debajo del asiento CaracterísticasSección de procexsamiento digital/ analógico EspecificacionesSección de DSP/ecualizador GeneralidadesCable CeNET Cables digitales ópticos vendidos aparte o suministradosDCA-008 1.5m DVD Vídeo Sistema de altavocesOperaciones DXZ745MP OperacionesSelección del menú de Dolby Pro Logic Ajuste de DSFActivación y desactivación de los altavoces SP-SEL Ajuste de la frecuencia de filtro de los altavoces FilterOperaciones DXZ745MP Ajuste del tiempo de retardo de los altavoces Delay Ajuste del nivel de salida de los altavoces SP-GAINAjuste de las características acústicas Ajuste de las funciones de Dolby Digital Dolby D Ajustes precisos del modoFunción de compresión del margen dinámico D-RANGE Nombre de las partes componentes Técnicas DE ConexiónConexión de esta unidad Precauciones para la instalación InstalaciónEjemplo de instalación para instalarlo debajo del asiento CajaAmpliación DEL Sistema Altavoz de subgraves autoalimentado Amplificador incorporado Problema Causa Solucion Descodificador Interruptor Reset 1ch SurroundEN Caso DE Dificultad 48 DVH940 用前须知 对全部频道采用高精度 96kHz/24bit 数字－模拟转换器 采用新型数字输入端子 主要特长附件一览 光学数字电缆（另售或附件） 确认事项扬声器系统 操作方法 Front HPF、SRD HPF的初始设定为 CENTER-SP中央扬声器 SURROUND-SP背面（环绕）扬声器 SUB-WOOFER亚低音扬声器Center HPF、SUB-W LPF的初始设定为 120 Hz。 在SUB-W LPF和CENTER HPF 的情况， 频率为50Hz、80Hz和120Hz。FRONT-R正面右扬声器 FRONT-L正面左扬声器SUB-WOOFER背面亚低音扬声器 CTR-SP中央扬声器MAX、STD或MIN选择数值。 Dimension 0〜6：Panorama Y或N： CTR Width 0〜7：接线方法 STAND-ALONE/SLAVE开关STAND-ALONE / Slave 开关 接线方法 RESET开关安装例（适用于座席下面的安装） 安装方法STAND-ALONE / Slave 转换开关 关于系统装配STAND-ALONE / SLAVE转换开关 故障排除 复原开关RESET

DVH940N specifications

The Clarion DVH940N is a versatile and feature-packed media receiver designed to enhance your in-car entertainment experience. This model is perfect for those who want to enjoy their favorite music and videos on the road while maintaining high-quality sound and exceptional usability.

One of the key features of the DVH940N is its compatibility with multiple media formats. It supports DVD, CD, and a range of digital audio file formats including MP3, WMA, and AAC. This versatility means you can play your favorite tracks from various sources, making every trip enjoyable.

The unit is equipped with a 6.2-inch touchscreen display, providing an intuitive interface that's easy to navigate. With vibrant colors and clear resolution, users can enjoy a visually appealing experience while accessing their media. The touchscreen feature also allows for quick access to settings, playlists, and other functionalities, making it user-friendly even while on the move.

For those who appreciate modern connectivity options, the DVH940N includes Bluetooth technology, enabling hands-free calling and audio streaming from smartphones and other compatible devices. This feature enhances safety and convenience, allowing drivers to keep their hands on the wheel and eyes on the road while still being connected.

The Clarion DVH940N also incorporates a built-in AM/FM tuner, providing access to a wide range of radio stations. Additionally, it features USB and AUX input options, making it easy to connect external devices like flash drives or portable music players. This expands the playback possibilities and ensures users can listen to their favorite tunes, regardless of the source.

One of the standout characteristics of the DVH940N is its sound customization capabilities. The unit includes a 3-band parametric equalizer, allowing users to fine-tune their audio experience to match their preferences and vehicle acoustics. Moreover, it supports a variety of audio outputs, including a dedicated subwoofer output, which can greatly enhance bass performance for audiophiles.

The DVH940N also places an emphasis on safety and convenience with its rear-view camera input, ensuring drivers can navigate tight spaces with ease. With a sleek design and a variety of customizable features, the Clarion DVH940N represents a solid choice for anyone looking to upgrade their car audio system. Whether for road trips or daily commutes, this media receiver offers a blend of functionality, sound quality, and user-friendly technology that elevates any driving experience.
Top Page Image Contents