Clarion PSWJPGC manual Remove the Radio Step Connect the T Harness, Test and SET the Gain

Page 2

Ia. WIRING USING A CLARION “T” HARNESS

There are 2 methods to connect this product to the vehicle. Please refer to section Ia and Ib for each.

STEP 1: Remove the Radio.

STEP 2:

Connect the "T" Harness.

A.Unplug factory wires from radio.

B.Plug the "T" harness in line with the radio wiring. SEE DIAGRAM 1.

C.Connect the BLACK wire on "T" harness to radio chassis.

STEP 3:

Route the wire harness from the radio to the rear passenger side of the vehicle.

STEP 4:

Connect the amplifier ground wire to a clean chassis ground near the subwoofer enclosure.

STEP 5:

TEST and SET the GAIN.

A.Turn on the system and be sure all speakers are working properly.

B.Set the subwoofer amplifier gain to a suitable level.

Ib. WIRING USING THE SUPPLIED HARNESS

STEP 1: Remove the Radio.

STEP 2:

Connect the wires.

Yellow:

Connect to Constant 12V Power

Black:

Connect to Radio Ground or Chassis

Blue:

Connect to Amp/Antenna Turn-on Lead

Green:

Connect to Left Rear Speaker (+) Positive Lead

Green/Black: Connect to Left Rear Speaker (-) Negative Lead

Violet: Connect to Right Rear Speaker (+) Positive Lead

Violet/Black: Connect to Right Rear Speaker (-) Negative Lead

STEP 3:

Route the wire harness from the radio to the rear passenger side of the vehicle.

STEP 4:

Connect the amplifier ground wire to a clean chassis ground near the subwoofer enclosure.

STEP 5:

TEST and SET the GAIN.

A.Turn on the system and be sure all speakers are working properly.

B.Set the subwoofer amplifier gain to a suitable level.

2

Image 2
Contents Overview ProcedurePreparation Qty Component Preassembled Loose ComponentsTest and SET the Gain Remove the Radio Step Connect the wiresRemove the Radio Step Connect the T Harness IV. Attach the Enclosure II. RUN Wire HarnessIII. Test the Enclosure Reassemble the Vehicle

PSWJPGC specifications

The Clarion PSWJPGC is a premier multi-channel amplifier designed specifically for car audio enthusiasts seeking to enhance their in-car sound experience. Known for its robust performance and innovative technologies, it caters to those who prioritize high fidelity and power in their audio systems.

One of the standout features of the PSWJPGC is its Class D amplification. This technology allows the amplifier to produce high output power while remaining compact and lightweight. Class D amplifiers operate more efficiently than traditional Class AB models, resulting in less heat and better energy use. This efficiency translates into powerful sound output without draining the vehicle’s electrical system.

The Clarion PSWJPGC supports multiple channels, enabling users to connect a wide range of audio components, including subwoofers and speakers. With a total output power that can reach up to 1000 watts, the amplifier ensures that every note and bass drop is delivered with clarity and punch. This makes it ideal for both casual listeners and audiophiles who desire accurate sound reproduction.

Another key feature of the PSWJPGC is its built-in crossover. This technology allows users to fine-tune their audio setup by controlling the frequency ranges that each channel produces. With adjustable low-pass and high-pass filters, users can optimize sound quality and ensure their system maintains balance across all frequencies.

The PSWJPGC also boasts a sleek design, housing all its components in a stylish yet durable chassis. The compact size makes it easy to install in various vehicle types without compromising aesthetics or space. Its robust construction ensures longevity, even under rigorous conditions typically experienced in automotive environments.

For added convenience, Clarion integrates advanced protection circuitry within the PSWJPGC. This feature protects the amplifier from overheating, short circuits, and other potential issues, ensuring reliable performance over time.

In summary, the Clarion PSWJPGC is a powerful, efficient, and versatile amplifier tailored for car audio systems. With its Class D technology, multi-channel support, built-in crossover capabilities, and durable design, it stands out as an excellent choice for users wanting to elevate their in-car audio experience to new heights. Whether you are a seasoned audio expert or simply looking to enhance your driving soundtrack, the PSWJPGC delivers quality and performance that resonates.