KitchenAid 883298, 6899552 dimensions Electrical connection, Install chimney sections

Page 5

screws

I

6 Remove the four screws on the upper

n chimney and disassemble chimney pieces from support frame.

Personal Injury Hazard

Because of the size and weight of this range hood, the support must be firmly attached to the ceiling.

l For plaster or sheet rock ceilings, the support must be attached to joists. If this is not possible, you must build a support structure behind the plaster or sheet rock.

l Make sure the support is connected firmly to ceiling.

. Firmly tighten all four set screws before attaching canopy.

Failure to follow these instructions could lead to personal injury or property damage.

7 Align support mounting bracket with holes in n ceiling. Attach support system frame to

ceiling using anchors recommended for your type of ceiling:

l Concrete ceiling - use inserts and screws provided.

l Wood ceiling - use 4” long wood screws.

l Plaster or sheet rock ceiling - attach support mounting bracket to ceiling joists if possible. If ceiling joists are not available, you must build a supporting structure behind the plaster or sheet rock.

Make sure the support is connected firmly to ceiling.

four set

8 Determine the height of the canopy. The n range hood requires at least 24 inches of clearance between bottom of range hood canopy

and cooking surface.

The bottom of the canopy will be approximately 9 inches below the bottom of the support system. To change the canopy height, loosen the four set screws on the support frame. Adjust support frame to the desired length and tighten all four set screws firmly in place before attaching canopy.

9 Press on

n handle in front of filters to release filters from range hood canopy. Remove filters and set aside.

10 Remove the terminal box cover from the n range hood. Remove the power supply

cable knockout using a flat-blade screwdriver. Attach conduit connector into power supply cable opening so that conduit connector clamping screws are inside the terminal box.

Personal Injury Hazard

Because of the weight and size of the range hood canopy, two or more people are needed to move and safely install the range hood canopy.

Failure to lift range hood properly could result in damage to the product or personal injury.

located next to

exhaust opening so that there is

approximately l/4 inch space between bolt head and canopy. Lift canopy and insert bolts into slots in support system frame. Tighten bolts to support system frame and canopy.

Electrical connection

Electrical Shock Hazard

l Electrical ground is required on this

the appliance is permanently grounded.

. Disconnect power to the junction box before making the electrical connection.

*This appliance must be connected to a grounded, metallic, permanent wiring system, or a grounding connector should be connected to the grounding terminal or wire lead on the appliance.

12n Make electrical connection:

q Disconnect power supply.

q Feed enough power supply cable through conduit connector to make electrical connections.

q Connect the power supply cable to range hood terminal box through the U.L.-listed conduit connector.

q Connect the white wire of the power supply cable with the white lead in the range hood, using a twist-on connector; connect the black wire of the power supply cable with the black lead in the range hood, using a twist-on connector.

q Connect the power supply green (green and yellow) grounding wire under the green, grounding screw.

q Tighten conduit connector screws. q Replace the terminal box cover.

Install chimney sections

13 Attach damper to exhaust opening on n top of the canopy using two Phillips-

head screws. Connect ductwork to damper and seal all connections with duct tape.

screw

14 Position upper chimney section on n support system frame.

section. Check for proper position. Then secure upper and lower chimney sections to support system frame with four screws.

chimney

15 Cut upper chimney trim to correct length. n Attach trim strips with clips to cover

chimney seam.

16 Place filters in canopy opening so rear n edge is over flange. Press filters up into

position.

Page 4

Image 5
Contents Quick Reference Table of ContentsTools needed Mobile home installationParts needed Important Observe all governing codes and ordinancesVenting methods For the most efficient and quiet operationCalculating the ductwork length ~,..,&~Opening PowerPreparation UpperElectrical connection Install chimney sectionsMaintenance CleaningIf you need service Check operationInternal blower Length of Warranty Limited ONE-YEAR

6899552, 883298 specifications

The KitchenAid 883298,6899552 is one of the leading appliances in the KitchenAid line, designed specifically to enhance cooking experiences. This versatile kitchen machine stands out with its blend of functionality, advanced technology, and elegant design, making it a must-have for both novice cooks and expert chefs.

One of the main features of the KitchenAid 883298,6899552 is its powerful motor, which ensures consistent performance whether you're mixing, kneading, or whipping. This motor offers multiple speed settings, allowing users to tailor their mixing speed to the specific needs of each recipe. From gently folding in flour to whipping egg whites into stiff peaks, this appliance provides the control needed for optimal results.

The robust mixing bowl is another highlight, featuring a capacity that can accommodate large quantities of ingredients, making it ideal for batch cooking and baking. The bowl is also designed for easy attachment and detachment, ensuring a smooth cooking process. The stainless steel construction means it is not only durable but also easy to clean, maintaining its luster even after frequent use.

Innovative technologies such as the planetary mixing action are integrated into the KitchenAid 883298,6899552. This mechanism ensures that the mixing attachment moves in a circular motion while also rotating around the bowl's perimeter, resulting in thorough and efficient mixing. This technology minimizes the need for manual scraping and helps achieve consistent textures and flavors in your culinary creations.

Another characteristic that sets this model apart is its compatibility with a wide range of attachments. From pasta makers to food grinders, the KitchenAid 883298,6899552 can transform into a multi-functional kitchen tool. This versatility enables users to explore numerous cooking styles and recipes, making it an investment that grows with your culinary skills.

The iconic design of the KitchenAid 883298,6899552, available in various colors, seamlessly fits into any kitchen decor. Its timeless aesthetic combines both form and function, making it not just an appliance but also an attractive kitchen accessory.

In summary, the KitchenAid 883298,6899552 is characterized by its powerful motor, generous mixing bowl, advanced planetary mixing technology, and compatibility with various attachments. Together, these features and technologies make it a top choice for those looking to elevate their cooking and baking experiences.