Install Range Hood

2.Select a flat surface for assembling the hood. Cover that surface with a protective covering such as a blanket or cardboard during assembly.

WARNING

Excessive Weight Hazard

Use two or more people to move and install range hood.

Failure to do so can result in back or other injury.

3.Using 2 or more people, slowly lift the range hood onto the protected surface.

4.Tip range hood on its back to remove the metal filters. Turn knob to the left (counterclockwise) and lift filters out.

5.Remove hardware package.

6.Add wood filler strips as needed to cabinet bottom. Drill

4 ³⁄₁₆" (4.8 mm) clearance holes for hood mounting screws.

13 ¹⁄₂" (34.3 cm) - 30" (76.2 cm) model 16 ¹⁄₂" (41.9 cm) - 36" (91.4 cm) model

		centerline	10 ⁹⁄₁₆"
			(26.8 cm)
wood filler strips	wall	³⁄₁₆" (94.8 mm)	⁷⁄₈"
wood filler strips	wall	³⁄₁₆" (94.8 mm)	(2.2 cm)
(recessed cabinet		clearance holes

bottoms only)

7.Cut a 6¹⁄₂" (16.5 cm) diameter hole in cabinet bottom as shown.

6 ¹⁄₂" (16.5 cm) diam. hole centerline

wall	4" (10.2 cm)

8.Cut a 1¹⁄₄" (3.2 cm) hole for power supply cable.

upper cabinet or soffit mounting surface

8 ¹⁄₁₆"

(20.5 cm)

centerline	1³⁄₈"
	(3.5 cm)

power supply cable hole in wall

9.Run wire through hole in accordance with the National Electrical Code or CSA Standards and local codes and ordinances. There must be enough power supply cable from the fused disconnect (or circuit breaker) box to make the connection in the range hood’s electrical box.

10.Use caulking to seal all openings.

IMPORTANT: Do not turn on power until installation is complete.

WARNING

Excessive Weight Hazard

Use two or more people to move and install range hood.

Failure to do so can result in back or other injury.

1.Remove the terminal box cover (located on back wall of hood) from the hood. Remove the power supply cable knockout using a flat-blade screwdriver.

Attach strain relief in power supply cable opening so that clamping screws are inside of range hood. Tip hood back to its bottom surface.

2.If roof or wall cap does not have a damper, attach damper to exhaust opening on top of the range hood using 2 small screws from hardware package.

3.Place the range hood mounting screws close to the holes in the cabinet bottom.

4.Lift range hood into place while feeding wiring through strain relief.

5.Insert the screws through the clearance holes and start them into the hood. Then, tighten screws securely.

6.Connect vent system, for either vented or recirculating, to range hood.

7.Seal all joints with duct tape.

8.For recirculating installations, install the vent cover included in Recirculation Kit Part Number 4396565 in soffit or cabinet top vent opening.

RangeHood specifications

The KitchenAid Range Hood is a paramount kitchen appliance designed to elevate culinary experiences while ensuring a clean and fresh cooking environment. Engineered with advanced features and innovative technologies, this range hood enhances functionality and style in any kitchen space.

One of the standout features of the KitchenAid Range Hood is its powerful ventilation system. Equipped with high-performance motors, it effectively removes smoke, odors, and grease from the air, ensuring that your kitchen remains comfortable and clean during and after cooking. The range hood offers multiple fan speeds to accommodate varying cooking styles, allowing you to customize the ventilation based on your needs.

Another notable characteristic is the quiet operation of the KitchenAid Range Hood. Designed with sound-reducing technology, it operates at lower decibel levels, so you can enjoy conversation or music while cooking without the distraction of loud fan noise. This feature makes the kitchen a more pleasant space for culinary creativity and family gatherings.

The graphic user interface is intuitive and straightforward, making it easy for users to navigate through its various settings. Dimming lights, adjustable fan speeds, and simple controls are seamlessly integrated into a sleek design, enhancing overall usability. Many models are equipped with LED task lighting, providing bright illumination over cooking surfaces for enhanced visibility and precision.

The KitchenAid Range Hood also prioritizes aesthetic appeal. With a range of finishes, including stainless steel and custom panel options, it easily complements any kitchen decor. Its modern design and clean lines ensure that it is not just a functional appliance, but also a stylish statement piece.

Energy efficiency is another core feature of the KitchenAid Range Hood. Many models are designed to consume less energy without compromising performance. This environmentally conscious approach not only helps reduce energy bills but also aligns with sustainable living practices.

Moreover, maintenance of the KitchenAid Range Hood is straightforward, with removable and dishwasher-safe filters that trap grease and debris, ensuring optimal performance and longevity. Some models even include an indicator that alerts users when filter cleaning or replacement is necessary.

In summary, the KitchenAid Range Hood is a perfect blend of power, efficiency, and style. Its advanced ventilation system, quiet operation, user-friendly controls, aesthetic design, energy efficiency, and easy maintenance make it a top choice for anyone looking to upgrade their kitchen. With KitchenAid, you can enjoy a clean and pleasant cooking environment that inspires culinary creativity.