KitchenAid KERS807SBB Installation Requirements, Toolsand Parts, Location Requirements

Page 3

INSTALLATION REQUIREMENTS

Toolsand Parts

Gather the required tools and parts before starting installation.

Rear Filler Strip (optional)

The rear filler strip may be used to fill a gap between the rear of the slide-in cooktop and the wall in a freestanding cutout.

Read and follow the instructions provided with any tools listed here.

Tools needed

A

B

B

■

Tape measure

■

Masking tape

■

Flat-blade screwdriver

■

¼" nut driver

■

Level

■

⁵⁄₁₆" nut driver

■

Hammer

■

¹⁄₈" (3.2 mm) drill bit (for

■ Hand or electric drill

 

wood floors)

 

³⁄₁₆" (4.8 mm) carbide-tipped

■

Wrench or pliers

■

 

masonry drill bit (for

 

Marker or pencil

 

■

 

concrete/ceramic floors)

Parts supplied

Check that all parts are included.

A

B

C

A.Anti-tip bracket

B.Plastic anchors (2)

C.#10 x ¹⁄₂" screws (2)

■Anti-tip bracket must be securely mounted to subfloor. Thickness of flooring may require longer screws to anchor bracket to subfloor. Longer screws are available from your local hardware store.

Parts needed

If using a power supply cord:

■A UL listed power supply cord kit marked for use with ranges. The cord should be rated at 250 volts minimum, 40 amps or 50 amps that is marked for use with nominal 1³⁄₈" (3.5 cm) diameter connection opening and must end in ring terminals or open-end spade terminals with upturned ends.

■A UL listed strain relief.

Check local codes. Check existing electrical supply. See “Electrical Requirements” section.

It is recommended that all electrical connections should be made by a licensed, qualified electrical installer.

C

A. Rear filler strip

B.Countertop

C.Countertop cutout

Please reference the “Assistance or Service” section of the Use and Care guide to order.

Black - W10113902A

White - W10113903A

Biscuit - W10113904A

Location Requirements

IMPORTANT: Observe all governing codes and ordinances.

■It is the installer’s responsibility to comply with installation clearances specified on the model/serial rating plate. The model/serial rating plate is located inside the oven door on the right-hand side oven door trim.

■The range should be located for convenient use in the kitchen.

■To eliminate the risk of burns or fire by reaching over heated surface units, cabinet storage space located above the surface units should be avoided. If cabinet storage is to be provided, the risk can be reduced by installing a range hood or microwave range hood combination that projects horizontally a minimum of 5" (12.7 cm) beyond the bottom of the cabinets.

■Cabinet opening dimensions that are shown must be used. Given dimensions are minimum clearances.

■The floor anti-tip bracket must be installed. To install the anti- tip bracket shipped with the range, see “Install Anti-Tip Bracket” section.

■Grounded electrical supply is required. See “Electrical Requirements” section.

IMPORTANT: To avoid damage to your cabinets, check with your builder or cabinet supplier to make sure that the materials used will not discolor, delaminate or sustain other damage. This oven has been designed in accordance with the requirements of UL and CSA International and complies with the maximum allowable wood cabinet temperatures of 194°F (90°C).

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents W10118260A Table DES Matières Range SafetyInstallation Requirements Toolsand PartsLocation Requirements Slide-in Range Mobile Home Additional Installation RequirementsProduct Dimensions Freestanding Range Mobile home installations requireCabinet Dimensions Electrical Requirements U.S.A. OnlyElectrical Connection Wire receptacle 10-50R If connecting to a 4-wire systemIf connecting to a 3-wire system Wire receptacle 14-50RMeasure for Proper Height Installation InstructionsCountertop Preparation Unpack RangeAdjust LevelingLegs Install Anti-Tip BracketFreestanding Ranges Electrical Connection U.S.A. Only Power Supply CordDirect Wire Style 1 Power supply cord strain reliefBlack horizontal cross brace Flexible conduit Wire connection Power Supply CordStyle 2 Direct wire strain relief Removable retaining nut Strain reliefWire Connection Direct Wire Direct Wire Installation Copper or Aluminum WireSupply cable Insert wire under screw clamp Hex washer head screwVerifyAnti-Tip Bracket Location Level RangeMoving the Range Complete InstallationFor power supply cord-connected ranges For direct-wired rangesOutillage nécessaire Exigences DinstallationSécurité DE LA Cuisinière Outillage et piècesLors de l’utilisation d’un cordon d’alimentation électrique Exigences demplacementPièces nécessaires Planchette de remplissage arrière facultativeDimensions du produit Cuisinière autoportante Cuisinière coulissante³⁄₄ 14,6 cm B 76,2 cm Largeur de louverture 30 76,2 cm min Dimensions du placardPréparation du plan de travail Spécificationsde l’installation électriqueCuisinières coulissantes Instructions DinstallationDéballage de la cuisinière Mesurespour une hauteur appropriéeAjusterles piedsde nivellement Installation de la bride antibasculementVérification de lemplacement de la bride Antibasculement Acheverl’installationRéglage de laplomb de la cuisinière Si la cuisinière ne fonctionne pas, contrôler ce qui suit Déplacement de la cuisinièreCuisinières alimentées par cordon dalimentation Pour les cuisinières avec câblage directHoles in bracket Trous dans la bride All rights reserved W10118260A

KERS807SBB specifications

The KitchenAid KERS807SBB is a standout in the realm of kitchen appliances, renowned for its versatile cooking capabilities and stylish design. This range combines technology, efficiency, and aesthetic appeal, making it an ideal addition to any modern kitchen.

One of the key features of the KERS807SBB is its large capacity oven, which offers a generous 6.4 cubic feet of cooking space. This ample size allows home cooks to prepare multiple dishes simultaneously, ideal for family gatherings or dinner parties. The oven is equipped with a True Convection cooking system, which employs a third heating element and a powerful fan that circulates hot air throughout the oven. This technology ensures even baking and roasting, eliminating hot spots and ensuring that every dish is cooked to perfection.

The range boasts a sleek stainless steel finish, which not only enhances its durability but also adds a touch of elegance to any kitchen decor. Its glass touch controls make adjusting settings and selecting cooking modes intuitive and user-friendly. The oven also features an adaptive bake function that adjusts cooking time and temperature for various dishes, enhancing cooking precision.

In addition to its impressive oven capabilities, the KERS807SBB offers a powerful cooktop with five burners, including a high-output burner that provides intense heat for quick boiling or searing. The burners include a simmer setting, perfect for delicate sauces or melting chocolate. All burners are designed for easy cleanup, featuring sealed designs to prevent spills from reaching the burner compartment.

The range also includes a self-cleaning feature that simplifies maintenance and upkeep, saving time and effort for busy home cooks. Its Warm Hold feature ensures that food remains at the perfect temperature until serving, providing peace of mind during meal preparation.

In terms of energy efficiency, the KERS807SBB is designed to minimize energy consumption while delivering high performance. It’s a perfect blend of modern technology and classic design, making it a practical and stylish choice for anyone looking to elevate their culinary experience.

With its premium features and user-friendly technologies, the KitchenAid KERS807SBB is more than just a cooking appliance; it's an essential tool for any home chef seeking reliability, efficiency, and sophistication in the kitchen.
Top Page Image Contents