KitchenAid KEBU107SSS installation instructions Install Oven, If you need to release tubing

If you need to release tubing:

Push in collet to release tubing. With collet held in, pull tubing straight out.

A

A. Collet

Connect to Water Filter Outlet (blue)

1.Attach the supplied ³⁄₈" to ¹⁄₄" stem or ³⁄₈" to ¹⁄₄" elbow quick connect adapter fitting to the blue water filter outlet connection by pushing the quick connect fitting past the o-ring until you hit the backstop.

2.Connect another piece of copper water supply tubing to the quick connect adapter fitting you just installed on the filter outlet (blue) side of the water filter.

3.Pull tube to ensure it is secured.

Copper water supply tubing to oven

Sink

Water supply connection

Yellow

WATER

IN

	Copper water supply	Blue
Shutoff	tubing to	WATER
valve	cold water supply	OUT
		Filter

4.Route copper tubing through undersink cabinet and oven cabinet cutout.

NOTE: Due to temperatures around oven, copper tubing is required.

5.Connect the copper water supply tubing to the oven copper tubing, using a ¼" to ¼" water supply union (not provided).

A

C

B

D

F

E

A. To home water supply B. Rear of cabinet cutout

C. Copper water supply tubing from home water supply D. ¼" to ¼" water supply union (not provided)

E. Oven copper tubing F. Oven front

6.Turn on water supply.

7.Check all connections for leaks.

NOTE: No flushing or conditioning of the water filter is required prior to use.

Install Oven

WARNING

Excessive Weight Hazard

Use two or more people to move and install oven. Failure to do so can result in back or other injury.

1.Using 2 or more people, lift oven partially into cabinet cutout using the oven opening as an area to grip.

NOTE: Push against seal area of oven front frame when pushing oven into cabinet. Do not push against outside edges.

8