Philips 32PFL7704D Uninstall and reinstall channels, Return your settings to default values

5 Adjust your antenna to maximize the signal strength.

6 Press MENU/EXIT to exit.

Uninstall and reinstall channels

When you uninstall a channel, you remove it from the list of stored channels. Uninstalled channels are not reinstalled during an installation update.

1 Press MENU/EXIT on the remote control and select [Installation] > [Channels] > [Uninstall channels].

TV menu	Installation
Channels		Uninstall channels
Autoprogram		52
Weak channel installation		53
Installation mode		54
Uninstall channels		55
		56
		57
		58
		59

2	Press	to enter the list of stored channels.
3	Press	or to select the channel you want to uninstall, and

press the green key on the remote control.

4 The channel is removed from the channel list. Press the green key again to reinstall the channel.

5 Press MENU/EXIT to exit.

Return your settings to default values

When you return picture and sound settings to their default values the channel installation settings are not affected.

1 Press MENU/EXIT on the remote control and select [Installation] > [Reset AV settings].

TV menu
Installation	Reset AV settings
Language
Channels	Start now
Preferences
Source labels
Clock
Current software info
Reset AV settings

2 Press to highlight [Start now], and press OK to reset the picture and sound settings.

3 Press MENU/EXIT to exit.

Show emergency alerts (EAS)

The SCTE18 standard defines an emergency alert signaling method for use by cable TV systems. EAS can be broadcast to digital devices such as digital set-top boxes, digital TVs, and digital VCRs.

The EAS scheme allows a cable operator to disseminate information related to state and local emergencies and warnings.

EAS contain the following information:

•Emergency alert text

•Start time and date

•End time and date

•Priority

EAS with priority maximum or high are always displayed on your TV. However, you can configure your TV not to show EAS messages with medium or low priority.

EAS is not possible with a multimedia browser or with analog video sources.

You can always remove the message from the screen.The message display overlaps menus and other messages on the screen.

1 Press MENU/EXIT on the remote control and select
[Installation] > [Preferences] > [Show emergency alerts].
TV menu Installation
Preferences	Show emergency alerts
Location	Always
Show emergency alerts	Skip low priority
Downloaded rating table	Skip medium/low priority

2 Highlight an option:

•[Always]: Displays all emergency alert messages

•[Skip low priority]: Shows all messages except low priority messages

•[Skip medium/low priority]: Shows maximum and high priority messages only

3 Press to confirm your choice. 4 Press MENU/EXIT to exit.

26EN