Philips 32PFL7704D Switch on and set up the TV, Finish the setup by selecting your location

Switch on and set up the TV

The TV turns on automatically after the power cord is inserted into the power connector.The following screen appears:

Thank you for your purchase of this PHILIPS TV.

Please proceed with the following steps to set up your TV. For the BESTpossible picture performance, contact your local Cable / Satellite signal provider for High Definition signal options available in your area.

Next

Press the GREEN button on your remote control to proceed.

Follow the on-screen instructions to select your language and complete your TV setup. Installation takes approximately 10 minutes.

Note

•If you connect your TV to a cable box or satellite set-top box, you do not need to install channels.

Finish the setup by selecting your location:

•If you choose [Retail store] your settings are erased each time you turn off the TV. Use this mode for retail store displays only.

•If you choose [Home] you are guided through a choice of picture display options. Press the left or right cursor buttons to select your preferred screen.

10EN