Cfneral Instructions, Dishwasher Connection

CFNERAL INSTRUCTIONS:

In old houses, it is generally good practice to clean out the existing drain line from sink to sewer before installing the disposer.

:.The disposer can be installed in steel, monel, stainless steel or cast iron sinks, with a sink opening of 3-l/2” to 4” without sink alteration.

.: Standard I -l/2” O.D. or 2” O.D. drain pipe is satisfactory for drain lines. Long horizontal drain lines should be eliminated. Drum traps and grease traps should not be used.

PLUSlBING INSTALLATION INSTRUCTIONS:

Remove existing sink drain connections and clean drain opening.

Remove disposer cover. Remove sink flange (1, Fig. I), sink flange seal (2 & 3, Fig. 1) and pressure washer (4, Fig. 1) by pressing down and pushing snap ring (6, Fig. 1) clockwise. f lold snap ring and lift sink flange up and out.

Disassemble sink flange, sink flange seal and pressure washer.

Fit the sink flange seal (2, Fig. 1) to sink flange (1, Fig. 1). Insert sink flange (,I. Fig. 1) into the drain opening. Be sure the sink flange is located in the center of the drain opening to assure a water-tight seal. NOTE: The rubber sink flange seal (2, Fig. 1) should always be used where possible. In rare instances v+here the contour or thickness of the sink opening does not permit use of the seal, a permanently pliable sealing compound can be used.

Assemble the other rubber sink flange seal (3, Fig. 1) and pressure washer (4, Fig. 1) onto the srnk flange by slipping pressure washer over the top set of depressions and turning so that depressions lock pressure washer into place. Lift disposer up and into sink flange (1, Fig. 1) until snap ring clicks into snap ring groove. Finger tighten the two adjusting screws (5, Fig. 1) up until they are in contact with pressure washer (4, Fig. 1). NOTE: The disposer is now loosely mounted.

Connect disposer to house drainage system and tighten spout bolts. Tighten the adjusting screws (5, Fig. I) securely to complete mounting.

Install stopper and fill sink with water. Remove stopper and check for leaks. If leakage is discovered, evenly tighten adjusting screws until leakage stops.

IO Check to assure the grinding chamber is clean of any foreign objects and the flywheel is free to rotate. Place the cover in position.

IIInstallation must be in accordance with local plumbing codes.

DISHWASHER CONNECTION:

Connecting the discharge of a dishwasher to a disposer will assure all waste particles discharged by the dishwasher are properly sized and flushed to the main drain system. A dishwasher inlet consisting of a 7/S” dia. tube is provided in the srde of the upper housing grinding chamber of all KitchenAid Disposers for con- nection of the dishwasher discharge.

1 Use a long Phillips screwdriver to force out the neoprene drain plug,

2.Remove the drain plug from the grinding chamber.

3.Connect the dishwasher drain hose to the disposer inlet using hose clamps.

KWS-200, KWI-200, KWE-200, KWD-2C0 specifications

The KitchenAid KWS-200, KWE-200, KWI-200, and KWD-2C0 represent a significant leap in kitchen appliance technology, catering to the needs of home cooks and professional chefs alike. These models are designed to enhance culinary experiences through innovation, functionality, and versatility.

The KitchenAid KWS-200 is a powerful wall oven that boasts advanced cooking technologies. Its True Convection Cooking feature utilizes a fan to circulate heat evenly, ensuring that dishes are cooked thoroughly. The oven comes equipped with a spacious interior, providing ample room for multiple dishes at once. Moreover, the built-in temperature probe allows users to monitor their food without opening the oven, promoting energy efficiency.

The KWE-200, a standout in the category of steam ovens, emphasizes health-conscious cooking. It incorporates a unique steam infusion technique, which preserves nutrients and flavors while ensuring that food retains moisture. This model is particularly ideal for vegetables, fish, and grains, allowing for healthier meal preparation without sacrificing taste. Additionally, the KWE-200 features a self-cleaning option, making maintenance a breeze.

For those seeking convenience and flexibility, the KitchenAid KWI-200 induction cooktop is a perfect choice. This model features precise temperature control and instant heat adjustments, which are hallmarks of induction cooking. The smooth glass surface not only adds a modern aesthetic to your kitchen but is also easy to clean. The KWI-200 includes a bridging element that allows for larger cookware to be used, making it versatile for various cooking styles.

Lastly, the KitchenAid KWD-2C0 is an innovative dishwasher that excels in both efficiency and performance. With its Sensor Clean feature, this model intelligently senses the level of dirt after each load, adjusting the wash cycle accordingly for optimal results. The Whisper Quiet operation ensures that the machine runs quietly, maintaining the serene environment of the kitchen. Featuring a third rack for additional loading flexibility, the KWD-2C0 maximizes space and minimizes water usage.

In conclusion, the KitchenAid KWS-200, KWE-200, KWI-200, and KWD-2C0 are exemplary products that showcase cutting-edge technology and thoughtful design. Each appliance addresses specific cooking challenges, making them invaluable pieces for any modern kitchen. Whether you’re baking, steaming, cooking, or cleaning, these KitchenAid models are engineered to elevate your culinary experience.