TRENDnet TEW-436BRM, Wireless ADSL Modem Router manual Troubleshooting, Windows Vista

Troubleshooting

I typed http://192.168.10.1 in my Internet Browser's Address Bar, but an error message says “The page cannot be displayed.” How can I get into the TEW-436BRM's web configuration page?

1.Check your hardware settings again by following the instructions in Section 2.

2.Make sure the Power, LAN and WLAN lights are lit.

3.Make sure your TCP/IP settings are set to Obtain an IP address automatically (see the steps below).

Windows Vista

1.Go into the Control Panel, click Network and Internet, click Network and Sharing Center, click Manage Network Connections and then right-click the Local Area Connection icon and then click Properties.

2.Click Internet Protocol Version 4 (TCP/IPv4) and then click Properties. Then click on

Obtain an IP address automatically.

Windows XP/2000

1.Go into the Control Panel, double-click the Network Connections icon and then right- click the Local Area Connection icon and then click Properties.

2.Click Internet Protocol (TCP/IP) and then click Properties. Then click on Obtain an IP address automatically.

4.Reset the TEW-436BRM. To reset the TEW-436BRM, take a pin or paperclip and press the reset button on the back of the Wireless Modem for 15 seconds. Then let go.

8