The Modem does not auto-detect my DSL connection. What should I do?
1.Verify that your DSL account is activated.
2.Make sure all the cables are properly connected (see Section 2).
3.In Section 3, select manual selection in the Setup Wizard and configure the Modem based on information provided by your ISP.
All the settings are correct, but I cannot make a wireless connection to the Modem. What should I do?
1.Double check that the Wireless LED on the Modem is lit. If the Wireless LED is not lit, press the WIRELESS ON/OFF button on the back of the Modem.
2.Power cycle the Modem. Unplug the power to the Modem. Wait 15 seconds, then plug the power back in.
3.Contact the manufacturer of your wireless network adapter. Make sure the wireless network adapter is configured with the proper SSID. The default SSID of the TEW- 436BRM is TRENDnet436. If you have enabled any encryption on the Wireless Modem, make sure to configure the wireless network adapter with the same encryption key.
I forgot my login password. What should I do?
Take a pin or paperclip and press the reset button on the back of the Wireless Modem for 15 seconds. Then let go.
This will return all settings to factory default. The default user name and password is admin.
If you still encounter problems or have any questions regarding the
9
