KitchenAid W10278586A Refrigerator Doors and Drawer, Complete the Installation

Page 5

5.Fasten the plastic water line to the refrigerator with a “P”

clamp. Slide the plastic water line into the retainer.

Complete the Installation

A

B

C

A. Brass nut

C. “P” Clamp

B. Compression sleeve

 

6.Turn on water supply to refrigerator and check for leaks. Correct any leaks.

Style 2

1.Remove plastic cap from water valve inlet port. Attach the copper tube to the valve inlet using a compression nut and sleeve as shown. Tighten the compression nut. Do not overtighten. Confirm copper tubing is secure by pulling on copper tubing.

2.Create a service loop with the copper tubing. Avoid kinks when coiling the copper tubing. Fasten the plastic water line to the refrigerator cabinet with a “P” clamp.

A

B

C

D

E

A. Copper tubing

D. Water valve inlet port

B. Compression nut

E. “P” clamp

C. Compression sleeve

 

3.Turn on water supply to refrigerator and check for leaks. Correct any leaks.

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

1.Plug into a grounded 3 prong outlet.

2.Flush the water system. See “Water and Ice Dispensers.”

Refrigerator Doors and Drawer

All graphics referenced in the following instructions are included later in this section after “Final Steps.”

Remove and Replace Handles

1.Using a ³⁄₃₂" or ¹⁄₈" Allen wrench, loosen the two setscrews located on the side of each handle. See Metal Handle graphics 1 and 2.

2.Pull the handle straight out from the door. Make sure you keep the screws for reattaching the handles.

3.To replace the handles, reverse the directions.

Remove Doors and Hinges

IMPORTANT:

■Remove food and any adjustable door or utility bins from doors.

■Keep the refrigerator doors closed until you are ready to lift them free from the cabinet.

NOTE: Provide additional support for the refrigerator door while the hinges are being removed. Do not depend on the door gasket magnets to hold the door in place while you are working.

TOOLS NEEDED: ⁵⁄₁₆", ³⁄₈", ¹⁄₄" hex-head socket wrench, #2 Phillips screwdriver, and a flat-blade screwdriver.

1.Unplug refrigerator or disconnect power.

2.Remove the base grille. Grasp the grille firmly and pull it toward you.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Refrigerator User Instructions Refrigerator SafetyClean Before Using Installation InstructionsUnpack the Refrigerator Remove the PackagingElectrical Requirements Location RequirementsWater Supply Requirements Recommended Grounding MethodConnect the Water Supply Refrigerator Doors and Drawer Complete the InstallationRemove and Replace Handles Remove Doors and HingesReplace Doors and Hinges Adjust the DoorsRemove and Replace Freezer Drawer Final StepsDrawer Front Removal Drawer Front Replacement Opening and Closing Doors Using the ControlsRefrigerator USE Photos FeaturesUSB Port Upload Photos to the DisplayCrisper Humidity Control Water and Ice Dispensers Ice Maker and Storage Bin Refrigerator Care CleaningWater Filter Status Light Water Filtration SystemRefrigerator Operation TroubleshootingChanging the Light Bulb Ice and Water Temperature and MoistureOff-taste, odor or gray color in the ice Water Filter CertificationsWater and ice dispenser will not operate properly Water is leaking from the dispenser systemApplication Guidelines/Water Supply Parameters Product Data SheetsModel UKF8001AXX-200 Capacity 200 Gallons 757 Liters This limited warranty does not cover Kitchenaid Refrigerator WarrantySécurité DU Réfrigérateur Instructions Dutilisation DU RéfrigérateurDéballage du réfrigérateur Instructions D’INSTALLATIONExigences demplacement Spécifications électriques Méthode recommandée de mise à la terreSpécifications de l’alimentation en eau Pression de leauRaccordement au réfrigérateur Raccordement de la canalisation deauRaccordement à une canalisation d’eau Enlèvement et réinstallation des poignées Achever l’installationPortes et tiroir du réfrigérateur Enlèvement des portes et des charnièresRetirer et réinstaller le tiroir du congélateur Réinstallation des portes et des charnièresAjustement des portes Étapes finalesEnlèvement et réinstallation de la porte Ouverture et fermeture des portes Utilisation des commandesUtilisation DU Réfrigérateur Caractéristiques Ajustement des commandesPort USB Télécharger des photos vers laffichageDiaporama Effacer les photos de laffichageMesure Options VerrouillageDistributeurs d’eau et de glaçons Réglage de lhumidité dans le bac à légumesPlateau coulissant Volumes préréglésLe distributeur de glaçons Distribution de glaceMachine à glaçons et bac d’entreposage Témoin lumineux de l’état du filtre à eau Entretien DU RéfrigérateurSystème de filtration de leau NettoyageFonctionnement du réfrigérateur Remplacement de l’ampoule d’éclairageDépannage Glaçons et eau Température et humiditéLeau du distributeur est tiède Goût, odeur ou couleur grise des glaçons’eau coule du système de distribution Système de filtration d’eau intérieur Feuilles DE Données SUR LE ProduitModèle UKF8001AXX-200 /Capacité 200 gallons 757 litres Kitchenaid Refrigerator Warranty All rights reserved W10278586A SP PN W10278589A

W10278586A specifications

The KitchenAid W10278586A is a high-performance kitchen appliance designed to elevate the culinary experience for home chefs. This versatile product is engineered with advanced technology that not only enhances functionality but also promotes efficiency in food preparation. One of the standout features of this model is its powerful motor, which provides the necessary strength to handle a variety of mixing tasks, from kneading pizza dough to whipping cream. This robust motor ensures consistent results, making it an indispensable tool in any kitchen.

Another significant characteristic of the W10278586A is its multi-speed control. This feature allows users to select the appropriate speed for their specific task, whether they are gently folding ingredients or mixing at high speeds. The intuitive controls are easy to navigate, providing precision and confidence in every use. The appliance’s design also integrates a soft-start feature, which gradually increases speed to prevent splattering, particularly useful when combining dry ingredients with wet ones.

In terms of build quality, the KitchenAid W10278586A is constructed with durable materials that ensure longevity and withstand the rigors of daily use. The stainless steel bowl not only has a sleek appearance but is also resistant to scratches and dents. Additionally, the bowl is large enough to accommodate a sizeable batch of ingredients, making it ideal for family-sized meals or entertaining guests.

The W10278586A also features a tilt-head design, allowing users to easily access the mixing bowl and incorporate ingredients without hassle. This convenience is complemented by a selection of attachments, including a wire whip, dough hook, and flat beater, which enables users to tackle a wide range of recipes with ease.

Aesthetic appeal is also a key aspect of the KitchenAid W10278586A, available in various colors to suit different kitchen decors. This appliance is not just functional but also acts as an attractive addition to the countertop.

In summary, the KitchenAid W10278586A combines power, versatility, and style, making it an essential appliance for both novice and experienced cooks alike. With its array of features and reliable performance, this model is sure to inspire culinary creativity in any household. Whether you are baking, whipping, or mixing, the KitchenAid W10278586A stands ready to assist in delivering delicious results every time.
Top Page Image Contents