KitchenAid W10278586A Location Requirements, Electrical Requirements, Water Supply Requirements

Page 3

Location Requirements

WARNING

Explosion Hazard

Keep flammable materials and vapors, such as gasoline, away from refrigerator.

Failure to do so can result in death, explosion, or fire.

To ensure proper ventilation for your refrigerator, allow for a ¹⁄₂" (1.25 cm) of space on each side and at the top. Allow for a 1"

(2.54 cm) space behind the refrigerator. If your refrigerator has an ice maker, allow extra space at the back for the water line connections. When installing your refrigerator next to a fixed wall, leave a 3³⁄₄" (9.5 cm) minimum space between the refrigerator and wall to allow the door to swing open.

NOTE: It is recommended that you do not install the refrigerator near an oven, radiator, or other heat source. Do not install the refrigerator in a location where the temperature will fall below 55°F (13°C).

¹⁄₂" (1.25 cm)

3³⁄₄" (9.5 cm)

Electrical Requirements

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

Before you move your refrigerator into its final location, it is important to make sure you have the proper electrical connection.

Recommended Grounding Method

A 115 Volt, 60 Hz., AC only 15- or 20-amp fused, grounded electrical supply is required. It is recommended that a separate circuit serving only your refrigerator be provided. Use an outlet that cannot be turned off by a switch. Do not use an extension cord.

NOTE: Before performing any type of installation, cleaning, or removing a light bulb, turn Cooling OFF, and then disconnect the refrigerator from the electrical source. When you are finished, reconnect the refrigerator to the electrical source and turn Cooling ON. See “Using the Controls.”

Water Supply Requirements

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.

TOOLS NEEDED:

■

Flat-blade screwdriver

■

¹⁄₄" Nut driver

■

⁷⁄₁₆" and ¹⁄₂" Open-end or two

■

¹⁄₄" Drill bit

 

adjustable wrenches

■

Cordless drill

 

 

IMPORTANT:

■All installations must meet local plumbing code requirements.

■Do not use a piercing-type or ³⁄₁₆" (4.76 mm) saddle valve which reduces water flow and clogs more easily.

■Use copper tubing and check for leaks. Install copper tubing only in areas where the household temperatures will remain above freezing.

■For models with water filters, the disposable water filter should be replaced at least every 6 months.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Refrigerator User Instructions Refrigerator SafetyRemove the Packaging Installation InstructionsClean Before Using Unpack the RefrigeratorRecommended Grounding Method Location RequirementsElectrical Requirements Water Supply RequirementsConnect the Water Supply Remove Doors and Hinges Complete the InstallationRefrigerator Doors and Drawer Remove and Replace HandlesFinal Steps Adjust the DoorsReplace Doors and Hinges Remove and Replace Freezer DrawerDrawer Front Removal Drawer Front Replacement Using the Controls Refrigerator USEOpening and Closing Doors Upload Photos to the Display FeaturesPhotos USB PortCrisper Humidity Control Water and Ice Dispensers Ice Maker and Storage Bin Water Filtration System CleaningRefrigerator Care Water Filter Status LightTroubleshooting Changing the Light BulbRefrigerator Operation Ice and Water Temperature and MoistureWater is leaking from the dispenser system Water Filter CertificationsOff-taste, odor or gray color in the ice Water and ice dispenser will not operate properlyApplication Guidelines/Water Supply Parameters Product Data SheetsModel UKF8001AXX-200 Capacity 200 Gallons 757 Liters This limited warranty does not cover Kitchenaid Refrigerator WarrantySécurité DU Réfrigérateur Instructions Dutilisation DU RéfrigérateurInstructions D’INSTALLATION Exigences demplacementDéballage du réfrigérateur Pression de leau Méthode recommandée de mise à la terreSpécifications électriques Spécifications de l’alimentation en eauRaccordement de la canalisation deau Raccordement à une canalisation d’eauRaccordement au réfrigérateur Enlèvement des portes et des charnières Achever l’installationEnlèvement et réinstallation des poignées Portes et tiroir du réfrigérateurÉtapes finales Réinstallation des portes et des charnièresRetirer et réinstaller le tiroir du congélateur Ajustement des portesEnlèvement et réinstallation de la porte Utilisation des commandes Utilisation DU RéfrigérateurOuverture et fermeture des portes Télécharger des photos vers laffichage Ajustement des commandesCaractéristiques Port USBOptions Verrouillage Effacer les photos de laffichageDiaporama MesureDistributeurs d’eau et de glaçons Réglage de lhumidité dans le bac à légumesDistribution de glace Volumes préréglésPlateau coulissant Le distributeur de glaçonsMachine à glaçons et bac d’entreposage Nettoyage Entretien DU RéfrigérateurTémoin lumineux de l’état du filtre à eau Système de filtration de leauRemplacement de l’ampoule d’éclairage DépannageFonctionnement du réfrigérateur Glaçons et eau Température et humiditéGoût, odeur ou couleur grise des glaçons ’eau coule du système de distributionLeau du distributeur est tiède Système de filtration d’eau intérieur Feuilles DE Données SUR LE ProduitModèle UKF8001AXX-200 /Capacité 200 gallons 757 litres Kitchenaid Refrigerator Warranty All rights reserved W10278586A SP PN W10278589A

W10278586A specifications

The KitchenAid W10278586A is a high-performance kitchen appliance designed to elevate the culinary experience for home chefs. This versatile product is engineered with advanced technology that not only enhances functionality but also promotes efficiency in food preparation. One of the standout features of this model is its powerful motor, which provides the necessary strength to handle a variety of mixing tasks, from kneading pizza dough to whipping cream. This robust motor ensures consistent results, making it an indispensable tool in any kitchen.

Another significant characteristic of the W10278586A is its multi-speed control. This feature allows users to select the appropriate speed for their specific task, whether they are gently folding ingredients or mixing at high speeds. The intuitive controls are easy to navigate, providing precision and confidence in every use. The appliance’s design also integrates a soft-start feature, which gradually increases speed to prevent splattering, particularly useful when combining dry ingredients with wet ones.

In terms of build quality, the KitchenAid W10278586A is constructed with durable materials that ensure longevity and withstand the rigors of daily use. The stainless steel bowl not only has a sleek appearance but is also resistant to scratches and dents. Additionally, the bowl is large enough to accommodate a sizeable batch of ingredients, making it ideal for family-sized meals or entertaining guests.

The W10278586A also features a tilt-head design, allowing users to easily access the mixing bowl and incorporate ingredients without hassle. This convenience is complemented by a selection of attachments, including a wire whip, dough hook, and flat beater, which enables users to tackle a wide range of recipes with ease.

Aesthetic appeal is also a key aspect of the KitchenAid W10278586A, available in various colors to suit different kitchen decors. This appliance is not just functional but also acts as an attractive addition to the countertop.

In summary, the KitchenAid W10278586A combines power, versatility, and style, making it an essential appliance for both novice and experienced cooks alike. With its array of features and reliable performance, this model is sure to inspire culinary creativity in any household. Whether you are baking, whipping, or mixing, the KitchenAid W10278586A stands ready to assist in delivering delicious results every time.
Top Page Image Contents