KitchenAid 2313787 Changing the Light Bulb, Vacation and MovingCare, To shut down the ice maker

Page 11

■Replace the ice scoop holder by replacing the thumb screws.

A

B

A. Thumb screw

B. Ice scoop holder

10.Wash the interior components (cutter grid, exterior of hoses, and water pan) and the storage bin, door gasket, ice scoop, and ice scoop holder with mild soap or detergent and warm water. Rinse in clean water. Then clean the same parts with a solution of 1 tbs (15 mL) of household bleach in 1 gal. (3.8 L) warm water. Rinse again thoroughly in clean water.

NOTE: Do not remove hoses. Do not wash plastic parts in dishwasher. They cannot withstand temperatures above 145°F (63°C).

11.Replace water pan by pushing back on the bottom with one hand while pushing up and back on the top. Secure the water pan by replacing both screws.

12.Check the following:

■Drain cap from the water pan is securely in place. If the drain cap is loose, water will empty from the water pan, and you will have either thin ice or no ice.

■Hose from water pan is inserted into storage bin drain opening.

13.Slide the cutter grid back into place and secure it by replacing the right-hand screw and plastic spacer. Then tighten the left-hand screw. Reconnect the cutter grid harness and the ice level sensor harness.

14.Replace the cutter grid cover and the two screws.

15.Plug in ice maker or reconnect power.

Changing the Light Bulb

The ice maker has a light bulb in the top of the storage bin.

To replace the light bulb:

1.Unplug ice maker or disconnect power.

2.Open the bin door.

3.Remove the two screws that hold the cutter grid cover in place. Reach behind the control panel and pull the light bulb down from the ceiling.

4.Replace with a 12-volt wedge base-type bulb (automotive #917). Locate the light bulb receptacle in the ceiling behind the control panel. Align the flat edge of the light bulb with the receptacle and snap the bulb into place.

5.Replace the cutter grid cover with two screws.

6.Plug in ice maker or reconnect power.

Vacation and MovingCare

WARNING

Electrical Shock Hazard

Disconnect power before servicing.

Replace all parts and panels before operating.

Failure to do so can result in death or electrical shock.

To shut down the ice maker:

1.Unplug ice maker or disconnect power.

2.Remove all ice from storage bin.

3.Shut off the water supply.

4.Remove the two screws in the lower access panel and the two screws from the base grille area of the front panel support. Pull forward to remove the lower access panel.

5.Disconnect the inlet and outlet lines to water valve. Allow these lines to drain and then reconnect to the valve.

6.Replace lower access panel and screws.

7.Drain water from water pan by removing the drain cap.

8.If the room temperature will drop below 32°F (0°C), remove water from the drain line.

For ice makers with a drain pump installed:

■Plug in ice maker or reconnect power.

■Turn ice maker off and remove all remaining ice from ice bin.

■Pour 1 qt (0.95 L) of water into the ice bin near the drain and let the unit stand for approximately 5 minutes. This will allow the water in the bin to drain into the drain pump so that the pump will remove the remaining water from the ice bin and the drain pump.

■Unplug ice maker or disconnect power.

9.Before using again, clean the ice maker and storage bin.

10.Plug into a grounded 3 prong outlet.

NOTE: All components of the ice maker are permanently lubricated at the factory. They should not require any additional oiling throughout the normal life of the machine.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents ICE Maker Table of Contents/Table des matièresTable of Contents Table DES Matières Your safety and the safety of others are very important ICE Maker SafetyElectrical Requirements Installation InstructionsUnpack the Ice Maker Location RequirementsConnect Water Supply Water Supply RequirementsLeveling Rear View Drain ConnectionGravity Drain System Drain Pump System on some modelsReplace Door Connecting the Drain Remove DoorIce Maker Doors Reverse HingesHow Your Ice Maker Works ICE Maker USENormal Sounds Exterior Surfaces Usingthe ControlsCleaning ICE Maker CareDirty or clogged condenser CondenserInterior Components To shut down the ice maker Changing the Light BulbVacation and MovingCare Ice Quality TroubleshootingPlumbing Problems Ice Maker OperationCanada Assistance or ServiceU.S.A Disclaimer of Implied Warranties Limitation of Remedies Kitchenaid ICE Maker WarrantyONE Year Limited Warranty Items Kitchenaid will not PAY forVotre sécurité et celle des autres est très importante Sécurité DE LA Machine À GlaçonsSpécificationsélectriques Instructions D’INSTALLATIONExigences d’emplacement Déballage de lamachineà glaçonsRaccordementde la canalisation d’eau Spécifications de l’alimentation en eauNivellement Ouvrir le robinet darrêt Raccordementau conduit dévacuationVidange par gravité VUE ArrièreVUE Latérale Porte de la machine à glaçonsSystème avec pompe de vidange sur certains modèles Raccordement du conduit dévacuationSons normaux Fonctionnement de la machine àglaçons Utilisation des commandesUtilisation DE LA Machine À Glaçons Entretien DE LA Machine À GlaçonsUn condenseur sale ou bouché Nettoyage du système de la machine à glaçonsCondenseur Nettoyage des composants intérieurs Arrêt de la machine à glaçons Changementde l’ampoule d’éclairagePrécautions à prendre pour les vacances Ou le déménagement Production de glaçons DépannageFonctionnement dela machine à glaçons Problèmes deplomberie Assistance OU ServiceQualité des glaçons Kitchenaid NE Prendra PAS EN Charge Garantie DE LA Machine À Glaçons KitchenaidGarantie Limitée DE UN AN All rights reserved 2313787

2313787 specifications

The KitchenAid 2313787 model stands out as a versatile and efficient food processor designed for both amateur home cooks and seasoned chefs alike. This appliance is part of KitchenAid's long-standing legacy of quality kitchen equipment, bringing innovation and functionality to the forefront.

One of the key features of the KitchenAid 2313787 is its powerful motor, which allows for smooth and efficient processing of various ingredients. With a robust capacity, it can easily handle tough items such as nuts, hard cheeses, and even dense fruits and vegetables. The motor’s ability to maintain speed under load ensures a consistently high performance, making meal prep quicker and easier.

The 2313787 offers multiple blade options and accessories that enhance its versatility. It typically comes with a standard multipurpose blade for chopping and mixing, as well as specialty blades like a slicing disc for evenly sliced vegetables and a shredding disc for finely shredded cheese. These attachments expand the appliance's function, allowing users to tackle a wide range of culinary tasks, from preparing salads to making sauces.

Another notable aspect of the KitchenAid 2313787 is its user-friendly design. The large feed tube provides the convenience of adding whole ingredients with minimal prep work, minimizing the need for extensive chopping before processing. Additionally, the appliance usually features intuitive controls that make operations straightforward—simply select the desired speed and let the processor handle the rest.

Safety is also a priority with this model. It often includes a secure locking mechanism that ensures the lid stays in place while in use, preventing any accidental spills or splashes. The non-slip base helps stabilize the processor during operation, ensuring safety and ease of use even when tackling heavy mixtures.

The aesthetic appeal of the KitchenAid 2313787 cannot be overlooked either. With its sleek design and various color options, it can complement any kitchen decor while also being a functional addition to your countertop.

In summary, the KitchenAid 2313787 food processor brings a combination of power, versatility, user-friendliness, and stylish design, making it an essential tool for anyone looking to elevate their cooking experience. Whether you're making a quick salad or preparing ingredients for a complex dish, this kitchen appliance is built to deliver outstanding results with ease.
Top Page Image Contents