Installation Instructions

Unpack the Ice Maker

NOTE: Do not kink or pinch the power supply cord between the ice maker and cabinet.

WARNING

Excessive Weight Hazard

Use two or more people to move and install ice maker. Failure to do so can result in back or other injury.

Removing Packaging Materials

Remove tape and glue from your ice maker before using.

■To remove any remaining tape or glue, rub the area briskly with your thumb. Tape or glue residue can also be easily removed by rubbing a small amount of liquid dish soap over the adhesive with your fingers. Wipe with warm water

and dry.

■Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or glue. These products can damage the surface of your ice maker.

Cleaning Before Use

After you remove all of the packaging materials, clean the inside of your ice maker before using it. See the cleaning instructions in the “Ice Maker Care” section.

Location Requirements

■To ensure proper ventilation for your ice maker, the front side must be completely unobstructed. The unit may be closed-in on the top and three sides, but the installation should allow the ice maker to be pulled forward for servicing if necessary.

■Installation of the ice maker requires a cold water supply inlet of ¹⁄₄" (6.35 mm) OD soft copper tubing with a shutoff valve and either a gravity-drain system or condensate pump to carry the water to an existing drain.

■Choose a well ventilated area with temperatures above 55°F (13°C) and below 100°F (38°C). Best results are obtained between 70°F (21°C) and 90°F (32°C).

■This unit must be installed in an area protected from the elements, such as wind, rain, water spray, or drip.

■When installing the ice maker under a counter, follow the recommended opening dimensions shown. Place electrical and plumbing fixtures in the recommended location as shown.

111/2

(29.2 cm)

34"

(86.4 cm)

Min.

281/2"

341/2"

(87.6 cm)

(72.4 cm)

Max.

3 1/2 "

(8.9 cm) (22.9 cm)

24"

(60.1 cm)

15"

(38.1 cm)

A. Recommended location for electrical and plumbing fixtures

B. Floor level

■You should choose a location where the floor is even. It is important for the ice maker to be level in order to work properly. If needed, you can adjust the height of the ice maker by changing the height of the leveling legs. See “Leveling.”

Electrical Requirements

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

Before you move your ice maker into its final location, it is important to make sure you have the proper electrical connection:

A 115 Volt, 60 Hz., AC only 15-amp electrical supply, properly grounded in accordance with the National Electrical Code and local codes and ordinances, is required.

It is recommended that a separate circuit, serving only your ice maker, be provided. Use a receptacle which cannot be turned off by a switch or pull chain.

2313787 specifications

The KitchenAid 2313787 model stands out as a versatile and efficient food processor designed for both amateur home cooks and seasoned chefs alike. This appliance is part of KitchenAid's long-standing legacy of quality kitchen equipment, bringing innovation and functionality to the forefront.

One of the key features of the KitchenAid 2313787 is its powerful motor, which allows for smooth and efficient processing of various ingredients. With a robust capacity, it can easily handle tough items such as nuts, hard cheeses, and even dense fruits and vegetables. The motor’s ability to maintain speed under load ensures a consistently high performance, making meal prep quicker and easier.

The 2313787 offers multiple blade options and accessories that enhance its versatility. It typically comes with a standard multipurpose blade for chopping and mixing, as well as specialty blades like a slicing disc for evenly sliced vegetables and a shredding disc for finely shredded cheese. These attachments expand the appliance's function, allowing users to tackle a wide range of culinary tasks, from preparing salads to making sauces.

Another notable aspect of the KitchenAid 2313787 is its user-friendly design. The large feed tube provides the convenience of adding whole ingredients with minimal prep work, minimizing the need for extensive chopping before processing. Additionally, the appliance usually features intuitive controls that make operations straightforward—simply select the desired speed and let the processor handle the rest.

Safety is also a priority with this model. It often includes a secure locking mechanism that ensures the lid stays in place while in use, preventing any accidental spills or splashes. The non-slip base helps stabilize the processor during operation, ensuring safety and ease of use even when tackling heavy mixtures.

The aesthetic appeal of the KitchenAid 2313787 cannot be overlooked either. With its sleek design and various color options, it can complement any kitchen decor while also being a functional addition to your countertop.

In summary, the KitchenAid 2313787 food processor brings a combination of power, versatility, user-friendliness, and stylish design, making it an essential tool for anyone looking to elevate their cooking experience. Whether you're making a quick salad or preparing ingredients for a complex dish, this kitchen appliance is built to deliver outstanding results with ease.