KitchenAid W10440551A Verify Anti-Tip Bracket Is Installed Engaged, Level Range

Page 14

Verify Anti-Tip Bracket Is Installed and

Engaged

On models with a storage drawer:

1.Remove the storage drawer. To remove the storage drawer:

■Pull the drawer straight out to the first stop.

■Lift up on the back of the drawer and pull out.

6.Repeat steps 1 and 2 to ensure that the range foot is engaged in the anti-tip bracket.

If the rear of the range lifts more than ¹⁄₂" (1.3 cm) off the floor without resistance, the anti-tip bracket may not be installed correctly. Do not operate the range without anti-tip bracket installed and engaged. Please reference the “Assistance or Service” section of the Use and Care Guide, or the cover or “Warranty” section of the User Instructions, to contact service.

2.Use a flashlight to look underneath the bottom of the range.

3.Visually check that the rear range foot is inserted into the slot of the anti-tip bracket.

On models with a warming drawer:

1.Place your foot against the bottom front of the warming drawer and grasp the control panel with two hands as shown.

2.Slowly attempt to tilt the range forward.

If you encounter immediate resistance, the range foot is engaged in the anti-tip bracket.

3.If the rear of the range lifts more than ½" (1.3 cm) off the floor without resistance, stop tilting the range and lower it gently back to the floor. The range foot is not engaged in the anti-tip bracket.

IMPORTANT: If there is a snapping or popping sound when lifting the range, the range may not be fully engaged in the bracket. Check to see if there are obstructions keeping the range from sliding to the wall or keeping the range foot from sliding into the bracket. Verify that the bracket is held securely in place by the mounting screws.

4.Slide the range forward, and verify that the anti-tip bracket is securely attached to the floor or wall.

5.Slide range back so the rear range foot is inserted into the slot of the anti-tip bracket.

IMPORTANT: If the back of the range is more than 2" (5.1 cm) from the mounting wall, the rear range foot may not engage the bracket. Slide the range forward and determine if there is an obstruction between the range and the mounting wall. Changes to the gas supply must be performed by a qualified service technician. If you need assistance or service, refer to the “Assistance or Service” section of the Use and Care Guide, or the cover or “Warranty” section of the User Instructions, for contact information.

Level Range

1.Place a rack in oven.

2.Place level on rack and check levelness of range, first side to side; then front to back.

3.If range is not level, pull range forward until rear leveling leg is removed from the anti-tip bracket.

On Ranges Equipped with Storage Drawers:

Use a ¼" drive ratchet, wrench or pliers to adjust leveling legs up or down until the range is level. Push range back into position. Check that rear leveling leg is engaged in the anti-tip bracket.

On Ranges Equipped with Warming Drawers:

Use a wrench or pliers to adjust leveling legs up or down until the range is level. Push range back into position. Check that rear leveling leg is engaged in the anti-tip bracket.

NOTE: Range must be level for satisfactory baking performance.

Complete Installation

1.Check that all parts are now installed. If there is an extra part, go back through the steps to see which step was skipped.

2.Check that you have all of your tools.

3.Dispose of/recycle all packaging materials.

4.Check that the range is level. See the “Level Range” section.

5.Use a mild solution of liquid household cleaner and warm water to remove waxy residue caused by shipping material. Dry thoroughly with a soft cloth. For more information, read the “Range Care” section of the Use and Care Guide.

6.Read the “Range Use” section in the range Use and Care Guide.

7.Plug in range or reconnect power.

8.Turn on surface burners and oven. See the Use and Care Guide for specific instruction on range operation.

If range does not operate, check the following:

■Household fuse is intact and tight; or circuit breaker has not tripped.

■Range is plugged into an outlet.

■Electrical supply is connected.

■See the “Troubleshooting” section in the Use and Care Guide.

When the range has been on for 5 minutes, check for heat. If range is cold, turn off the range and contact a qualified technician.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents W10440551A Table of Contents Table DES MatièresRange Safety Your safety and the safety of others are very importantLocation Requirements Installation RequirementsTools and Parts Mobile home installations require Mobile Home Additional Installation RequirementsProduct Dimensions Freestanding Range Slide-in RangeElectrical Connection Cabinet DimensionsElectrical Requirements U.S.A. Only Electrical Requirements Canada Only If connecting to a 4-wire systemIf connecting to a 3-wire system Unpack Range Installation InstructionsCountertop Preparation Measure for Proper HeightFreestanding Ranges Adjust Leveling LegsInstall Anti-Tip Bracket Electrical Connection U.S.A. Only Power Supply CordDirect Wire Floor MountingStyle 1 Power supply cord strain relief Style 2 Direct wire strain reliefWire connection Power Supply Cord Direct Wire Installation Copper or Aluminum Wire Wire Connection Direct WireLevel Range Verify Anti-Tip Bracket Is Installed EngagedComplete Installation Moving the Range For power supply cord-connected rangesFor direct-wired ranges Page Page Sécurité DE LA Cuisinière Votre sécurité et celle des autres est très importanteOutillage et pièces Exigences DinstallationExigences demplacement Dimensions du produit Cuisinière autoportante Cuisinière encastrableDimensions du placard RemarqueSpécifications électriques Préparation du plan de travailMesures pour une hauteur appropriée Instructions DinstallationDéballage de la cuisinière Cuisinières autoportantesInstallation de la bride antibasculement Ajuster les pieds de nivellementSur les modèles avec tiroir de remisage Montage au plancher Sur les modèles avec tiroir-réchaudMontage mural Réglage de laplomb de la cuisinière Achever linstallationDéplacement de la cuisinière Cuisinières alimentées par cordon d’alimentationPour les cuisinières avec câblage direct 11/11

W10440551A specifications

The KitchenAid W10440551A is a notable kitchen accessory that has garnered attention for its quality and functionality. Designed with a perfect blend of style and performance, this product features a robust construction that ensures durability and longevity, making it an ideal companion for any home chef.

One of the standout features of the KitchenAid W10440551A is its versatility. It is not merely a single-use appliance but a multi-functional tool that can assist with a variety of cooking tasks. Whether you’re mixing, kneading, or whipping, this product can handle it all, making it an essential addition to any kitchen. The user-friendly design allows for effortless operation, even for those who are new to cooking.

In terms of technology, the W10440551A incorporates advanced mechanisms that enhance user experience. The powerful motor is designed to provide consistent performance, ensuring that you achieve the desired results every time. Additionally, the product features several speed settings, allowing you to adjust the mixing intensity according to your specific needs. This level of customization makes it suitable for a range of recipes, from delicate meringues to heavy bread doughs.

Another impressive aspect of the KitchenAid W10440551A is its ergonomic design. The appliance is crafted for comfort and ease of use, with controls that are both intuitive and accessible. A well-placed handle ensures that pouring and transferring mixtures is a straightforward task, reducing the likelihood of spills and messes.

The product also includes various attachments that enhance its functionality further. From dough hooks to whisk attachments, these accessories allow users to expand their culinary capabilities without the need for additional appliances cluttering the kitchen counter.

Moreover, the KitchenAid W10440551A is designed with safety in mind. It features a secure locking mechanism that keeps the bowl in place during operation, preventing any accidental spills or accidents.

Finally, the aesthetic appeal of the KitchenAid W10440551A cannot be overlooked. Available in multiple colors, this appliance can seamlessly blend into any kitchen décor, adding a stylish touch to your culinary space.

In summary, the KitchenAid W10440551A stands out for its versatility, user-centric design, and robust performance, making it an indispensable tool for modern kitchens. Whether you are a novice cook or a seasoned chef, this appliance is sure to elevate your cooking experience.
Top Page Image Contents